- Uses and applies technical standards, principles, theories, concepts, and techniques to perform activities/assignments that may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials or methods and difficult coordination requirements.
- Supports the development of technical documentation (including but not limited to designs, testing, calculations, reports, standards, etc.) Utilizes and may assist with the development of procedures requiring a broad knowledge and proficiency in a specialty area and has a general knowledge of related disciplines.
- Works under the general direction of a higher-level engineer or supervisor for routine engineering projects. Provide ongoing technical support for project activities within areas such as Operations, Maintenance, testing/diagnostics and Regulatory. May provide field engineering oversight and/or direction for activities such as commissioning, testing, inspections, etc.
- May lead small-medium, non-critical projects. Coordinate/leads critical projects or portions of projects (including phases such as research, design, equipment selection, procurement support, installation and commissioning), under the direction of a higher-level engineer or supervisor. Work reviewed upon completion for adequacy in meeting objectives.
- Under the direction of a higher-level engineer/supervisor supports bid/evaluation processes including preparation of bid documents, completion of technical evaluations for proposals; provide recommendations for selection, etc. Partners and communicates with areas such as Supply Chain and Legal following appropriate processes.
- Frequently exchanges information in all formats, on matters having a wide range of importance and complexity both inter-organizationally and with outside customers.
- May assign tasks and coordinate work of interns, drafters, technicians, craft personnel and/or others. Provide guidance and mentoring to less experienced engineers. Responsible for continuous self-development of technical skills and competencies.
- Performs activities such as budgeting, estimating, forecasting, accounting, work order management, in support of engineering projects. Minimum Requirements
- Bachelor's Degree in Engineering from ABET accredited curriculum (or recognized equivalency).
- 0+ years relevant engineering experience (Entry Level).
- 2+ years relevant engineering experience (Staff Level).
- 5+ years relevant engineering experience (Senior Level).
- EIT/FE (Engineer in Training/Fundamentals of Engineering) for Senior Level.
- Demonstrated broad knowledge and proficiency in specialty area, knowledge of related specialties, and general knowledge of other related disciplines.
- Ability to demonstrate the unique technical skills and core competencies for this engineering level established and documented by the organization. Preferred Qualifications
- Electrical Engineering Degree
- EIT/FE (Engineer in Training/Fundamentals of Engineering) (Entry and Staff Levels)
- Experience with serial and Internet Protocol networking as well as SCADA protocols, including Distributed Network Protocol (DNP3), MODBUS and IEC
- Experience with various types of utility Distribution Automation control hardware, including reclosers, automated switches and capacitor banks.
- Experience with planning and applying both wired and wireless communications solutions, including WiFI, Bluetooth, RF, cellular, WiSUN, Ethernet and serial.
- Familiarity with network security concepts and experience deploying highly secured networks. Salary Range:Entry - $67,000 to $84,000, plus 8% Annual Incentive Program BonusStaff - $78,000 to $101,000, plus 8% Annual Incentive Program BonusSenior - $93,000 to $123,000, plus 10% Annual Incentive Program Bonus As a leading combination electricity and natural gas energy company, Xcel Energy offers a comprehensive portfolio of energy-related products and services to 3.4 million electricity and 1.9 million natural gas customers across eight Western and Midwestern states. At Xcel Energy, we strive to be the preferred and trusted provider of the energy our customers need. If you're ready to be a part of something big, we invite you to join our team. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Individuals with a disability who need an accommodation to apply please contact us at
Non-Bargaining
The anticipated starting base pay for this position is: $67,000.00 to $123,000.00 per year
This position may also be eligible for the following benefits and/or pay components: Pay - Annual Incentive Program, Medical/Pharmacy Plan, Dental, Vision, Life Insurance, Dependent Care Reimbursement Account, Health Care Reimbursement Account, Health Savings Account (HSA) (if enrolled in eligible health plan), Limited-Purpose FSA (if enrolled in eligible health plan and HSA), Transportation Reimbursement Account, Short-term disability (STD), Long-term disability (LTD), Employee Assistance Program (EAP), Fitness Center Reimbursement (if enrolled in eligible health plan), Tuition reimbursement, Transit programs, Employee recognition program, Pension, 401(k) plan, Paid time off (PTO), Holidays, Personal holidays, Volunteer Paid Time Off (VPTO) (full-time employees only), Parental Leave
Pay and benefit packages may vary based on position. Some employees are under collective bargaining agreements, which determine the benefits they will receive. If the information conflicts with the terms of the written plan documents governing the plan, the plan document will control. Benefit plans are subject to change and Xcel Energy has the right to end, suspend, or amend any of its plans, at any time, in whole or in part.
Deadline to Apply: 04/04/24
EEO is the Law | EEO is the Law Supplement | Pay Transparency Nondiscrimination | Equal Opportunity Policy (PDF) | Employee Rights (PDF)
ACCESSIBILITY STATEMENT
Xcel Energy endeavors to make accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact Xcel Energy Talent Acquisition at This contact information is for accommodation requests only and cannot be used to inquire about the status of applications. -
Controls Engineer
Found in: Lensa US 4 C2 - 3 days ago
International Staff Consulting Denver, United StatesElectrical Controls EngineerSalary: 100, ,000 / year + Amazing benefits (listed below)Working under general direction the Electrical Engineer applies their skills and expertise to generate solutions that required development and sustainment of new or improved techniques, procedur ...
-
Controls Engineer
Found in: Lensa US 4 C2 - 3 days ago
HDR Denver, United StatesAbout UsAt HDR, we specialize in engineering, architecture, environmental and construction services. While we are most well-known for adding beauty and structure to communities through high-performance buildings and smart infrastructure, we provide much more than that. We create ...
-
Controls Engineer
Found in: Lensa US 4 C2 - 3 days ago
Affinity Executive Search Denver, United StatesElectrical Controls Engineer · Salary: 100, ,000 / year + Amazing benefits (listed below) · Working under general direction the Electrical Engineer applies their skills and expertise to generate solutions that required development and sustainment of new or improved techniques, ...
-
Controls Engineer
Found in: Lensa US 4 C2 - 3 days ago
META Denver, United StatesMeta is seeking a Controls Engineer experienced in the design and construction of Critical Facilities to become part of our data center engineering team. The successful candidate will deliver Critical Facilities, across Greenfields, Retrofits and Leased facilities, to support the ...
-
Controls Engineer
Found in: Lensa US 4 C2 - 3 days ago
Fashion Institute of Design & Merchandising Denver, United StatesAt HDR, we specialize in engineering, architecture, environmental and construction services. While we are most well-known for adding beauty and structure to communities through high-performance buildings and smart infrastructure, we provide much more than that. We create an unsha ...
-
Controls Engineer
Found in: Talent US C2 - 6 days ago
hdr Denver, United States Full timeControls Engineer Description About Us · At HDR, we specialize in engineering, architecture, environmental and construction services. While we are most well-known for adding beauty and structure to communities through high-performance buildings and smart infrastructure, we pro ...
-
Electrical Controls Engineer
Found in: Lensa US 4 C2 - 3 days ago
Liberty Personnel Services, Inc. Denver, United StatesElectrical Controls Engineer - mid level Premier industrial automation controls engineering firm seeks industrial controls and electrical engineer with PLC and HMI proficiency:2+ years of industrial controls engineering experienceHMI/SCADA programming, development (Rockwell/Allen ...
-
Electrical control engineer
Found in: Lensa US 4 C2 - 13 hours ago
HCPL Global Inc. Denver, United StatesHello, · HCPL Global Consulting & Services is a pioneering Management & IT consulting firm that enables Government, Banking, Private and Commercial Sectors to transform best practice concepts into effective organizational capabilities. · We offer and provide innovative solutions ...
-
Instrumentation and Controls Engineer
Found in: Lensa US 4 C2 - 3 days ago
Hazen and Sawyer Denver, United StatesJob Description · Job Description · Hazen and Sawyer is seeking a candidate in one of our Denver, Colorado offices to provide instrumentation and controls engineering and design for water and wastewater projects. · Work includes both in-plant and remote telemetry (SCADA) projec ...
-
Electrical Controls Engineer
Found in: Lensa US 4 C2 - 3 days ago
Liberty Personnel Services, Inc. Denver, United StatesElectrical Controls Engineer - mid level · Premier industrial automation controls engineering firm seeks industrial controls and electrical engineer with PLC and HMI proficiency: · 2+ years of industrial controls engineering experience · HMI/SCADA programming, development (Rockw ...
-
Controls and Automation Engineer
Found in: Lensa US 4 C2 - 3 days ago
Peak Energy Services Denver, United StatesJob Description · Job Description · About the Company: · Peak Energy is the first American venture to advance globally proven Sodium-Ion battery systems as the storage standard for the new era of renewable energy on a resilient grid. Sodium-Ion is cheap, readily available and s ...
-
Electrical Controls Engineer
Found in: Lensa US 4 C2 - 3 days ago
Liberty Personnel Services, Inc. Denver, United StatesElectrical Controls Engineer - Ignition HMI/SCADA · Electrical Controls Engineer - Ignition HMI/SCADA · Are you a skilled · Electrical Controls Engineer · looking for a fulfilling career with a dynamic and growing company? Look no further We are seeking a highly motivated indi ...
-
Control Systems Engineer
Found in: Lensa US 4 C2 - 2 days ago
Logical Systems Denver, United StatesControl Systems Engineers work to design automation systems that control the process or machine in the desired manner. The engineer will apply instrumentation, control valves, Motors/VFDs, control system electrical design, and Programmable Logic Controller (PLC) and Distributed C ...
-
Control Systems Engineer
Found in: Lensa US 4 C2 - 3 days ago
Liberty Personnel Services, Inc. Denver, United StatesPreferred industries include Oil & Gas, Power Generation, Energy, Gas turbines, Water/wastewater and related process controls environments · P&ID's · Networking and database management · Outstanding opportunity to work for a titan of industry · FT, permanent, direct hire · To app ...
-
Jr. Electrical Controls Engineer
Found in: Lensa US 4 C2 - 3 days ago
Liberty Personnel Services, Inc. Denver, United StatesRespected industrial automation controls engineering firm seeks industrial controls and electrical engineer with junior level PLC and HMI proficiency and experience: · Internship, co-op or full-time industrial control systems design and programming experience · HMI/SCADA programm ...
-
Sr. Control Systems Engineer
Found in: Lensa US 4 C2 - 3 days ago
Liberty Personnel Services, Inc. Denver, United StatesElite automation solutions provider seeks experienced Control Systems Engineer / Technical Lead with Oil & Gas, power generation, chemical processing, food & beverage and/or water/wastewater industry experience: · Ability to serve as technical expert/lead engineers · PLC, HMI, DC ...
-
Lead Electrical Controls Engineer
Found in: Lensa US 4 C2 - 3 days ago
Liberty Personnel Services, Inc. Denver, United StatesLead Electrical Controls Engineer - Robotics/PLC · Lead Electrical Controls Engineer - Robotics/PLC · Top automation systems integrator seeks expert Controls Engineer out of discreet processing-focused systems integration: · Robotics programming · Machine vision systems · Motion ...
-
Automation Controls Engineer Leader
Found in: Lensa US 4 C2 - 13 hours ago
PepsiCo Denver, United StatesOverview · Be part of the team to support a successful transition from the current M&W plant in downtown Denver to the new State-of-the-Art Facility, High Point. High Point will be PepsiCo's largest and most sustainable plant and will serve as a model for future operations. This ...
-
Electrical/Controls/Automation Engineer
Found in: Appcast Linkedin GBL C2 - 1 day ago
Staff Financial Group Denver, United StatesElectrical/Controls/Automation Engineer · Location: Denver, Colorado · Job Description: · We are seeking an experienced Electrical/Controls/Automation Engineer to take charge of specifying, designing, configuring, testing, supervising, and manufacturing control, electrical, an ...
-
Controls Software Design Engineer
Found in: Lensa US 4 C2 - 3 days ago
QuEST Global Denver, United States55810BR · Title: · Controls Software Design Engineer · Job Description: · Quest Global is an organization at the forefront of innovation and one of the world's fastest growing engineering services firms with deep domain knowledge and recognized expertise in the top OEMs acros ...
Electricity Distribution Controls Engineer - Denver, United States - Xcel Energy
Description
Are you looking for an exciting job where you can put your skills and talents to work at a company you can feel proud to be a part of? Do you want a workplace that will challenge you and offer you opportunities to learn and grow? A position at Xcel Energy could be just what you're looking for.
Position Summary
This position is based in Denver, Colorado, on a hybrid work schedule. Consideration for Entry, Staff and Senior Level candidates will be assessed based upon experience, knowledge, and qualifications during the interview process.
Xcel Energy is deploying thousands of Electric Distribution Automation devices across its service territory, utilizing these devices independently and in tandem to drive increased reliability and improved service quality for its customers. These devices are critical for realizing the benefits of Xcel Energy's Advanced Grid transition and provide valuable insights into Distribution system conditions for new tools such as the Advanced Distribution Management System, as well as visibility for Operation and Engineering teams.
This position is for a Distribution Controls and Communication Engineer within the Grid Operation Engineering organization. This role will support a distributed team in developing a control and configuration roadmap at Xcel Energy, providing a clear path forward related to the design, deployment, security and maintenance of automation across Xcel Energy's service territory. The role will also be responsible for actively supporting the deployment of distribution automation devices to realize that roadmap.
Responsibilities