- Performing Department Director duties as assigned.
- Providing technical guidance to automation controls staff
- Supervising Automation Controls Integrators
- Mentoring and monitoring the professional development of automation controls staff and leading staff training sessions
- Performing various aspects of automation controls design, including the understanding, use, and development of automation/control logic, Programmable Logic Controllers (PLC) programs, and graphics for human-machine interface (HMI), electrical schematics, Piping & Instrumentation Diagram (P&ID's), and wiring diagrams.
- Designing and programming industrial control systems (ICS), including programmable logic controllers (PLCs), remote I/O systems, remote terminal units (RTUs), and human-machine interface (HMI) components.
- Working collaboratively within project teams, including electrical engineers, control system programmers, information system programmers, manufacturing representatives, suppliers, purchasers, and other client representatives to design, develop, manufacture, install, and deliver integrated automation controls solutions and processes.
- Assisting, as directed, with the management of the mechanical portion of projects, and working with assigned project managers, to meet client's budget, contract fees, goals, objectives, and deadlines.
- Providing check-out, operational testing, commissioning, start-up, and calibration of control systems at customer sites, coordinating with the firm's building commissioning services as appropriate.
- Providing assessments, troubleshooting, maintenance, redesign, and end-user training services to assist clients in reaching equipment utilization and operational goals.
- Recommending equipment operational parameters, technical specifications, calibration requirements, and spare parts recommendations.
- Preparing, reviewing, and updating Standard Operating Procedures for the automated equipment and systems.
- Ensuring compliance with relevant health and safety regulations and quality control policies and procedures
- Performing construction phase services, including representing the firm on-site, answering RFI's, reviewing shop drawings, preparing as-builts, etc., as directed.
- Working with, responding to, and taking direction from project managers, PICs, Operations Directors, and Senior Management
- Monitor and adhere to project budgets and schedules
- The ability to travel is required
- A high school diploma or GED equivalent is required.
- A bachelor's degree in one of the following disciplines is preferred: Electrical or Electronics Engineering, Electrical or Electronics Engineering Technology, Electromechanical Engineering Technology, Mechanical Engineering, Mechanical Engineering Technology, or Instrumentation and Control Systems Engineering Technology
- The following certifications or accreditations are desirable:
- CAP – Certified Automation Professional
- CCST – Certified Control Systems Technician
- CIMM – Certified Industrial Maintenance Mechanics
- NICET certificate for Industrial Instrumentation
- Passing the FE exam or otherwise qualifying as an EIT
- Membership in ISA (International Society of Automation) is preferred
- A Senior Automation Controls Integrator should be able to effectively utilize current company software programs for word processing, e-mail, accounting, and information management.
- Working familiarity with design and production software to the point of being able to understand the capabilities and limitations of the programs and interact with the support staff in their use of the software is highly desirable.
- Typical software programs currently being utilized are as follows:
- MS Office
- Outlook
- Visual Basic
- Rockwell Automation's Allen-Bradley RSLogix programming software (RSLogix 5, RSLogix 500, and RSLogix 5000)
- Siemens Simatic Step 7 engineering software (S7-300, S7-200, and S7-1200 series modular controllers programming)
- Other programming software for Human-Machine Interface (HMI) modules and Programmable Logic Controllers (PLCs)
- CIP-based programming protocols for networks, including ControlNet, DeviceNet, and EtherNet/IP
- Modbus-based communications protocols
- Other Industrial Control Systems (ICS) software
- AutoCAD
- Autodesk Plant Design Suite Standard
- AutoCAD P&ID
- AutoCAD Electrical
- Autodesk Revit
- Bentley MicroStation
- Bentley BIM
- Bentley MEP
- Other Building Information Modeling and 3D modeling software
- A Senior Automation Controls Integrator will typically have 10+ years of Automation Controls design experience in one or more of the following types of design projects is strongly preferred:
- Design Build projects
- Industrial facilities
- DOD and Military facilities
- Projects exceeding $20 million in construction value
- Possess excellent written communication skills, being able to prepare effective and concise documents and correspondence (Your on-line application will be reviewed for written communication skills, completeness, and attention to detail)
- Possess strong verbal communication skills, being comfortable with and able to make presentations to a variety of groups up to and including large public meetings
- Have an enthusiastic, client-oriented, can-do attitude with a desire to provide outstanding professional services
- Be dedicated to his or her professional development as well as the success of colleagues and the firm as a whole
-
Controls Engineering Technician
1 week ago
First Quality Enterprises, Inc Macon, United States**First Quality** was founded in 1989 and, in nearly three decades, has grown to be a global privately held company with over 4,000 employees. Its corporate offices are located in Great Neck, New York, with manufacturing facilities and offices in Pennsylvania, South Carolina, Geo ...
-
Installation Technician
2 weeks ago
CANA Communications Macon, United StatesCana Communications has been in business for over 35 years and is a leader in providing electronic equipment and system integration services. We are recognized experts in enterprise level fire alarm, IP voice/data communications, IP security, IP sound and IP video distribution sy ...
-
Medical Lab Technician
3 weeks ago
Atrium Health Macon, GA, United StatesAtrium Health is seeking a Medical Lab Technician for a job in Macon, Georgia. · Job Description & Requirements · Specialty: Medical Lab Technician · Discipline: Allied Health Professional · Duration: Ongoing · 40 hours per week · Shift: 8 hours, days · Employment Type: Staff · O ...
-
RAL Lab Technician-L1
3 weeks ago
KaMin Macon, United StatesPrincipal Duties and Responsibilities: · Begin to learn and implement all Reserve Analysis Lab policies and testing procedures associated with incoming drill core samples. The employee will begin by learning the basic set-up and operations of the Reserve Analysis Lab in the core ...
-
Electrician
2 days ago
Martin Marietta Macon, United States PermanentResponsible for safely and efficiently maintaining, calibrating, troubleshooting, consulting, researching, and developing electrical process control instrumentation for the purpose of obtaining optimum production efficiency under the supervision of the Site Supervisor. This posit ...
-
Senior Industrial Engineer I
1 week ago
Clark Nexsen Macon, United StatesWe seek to hire a Senior Industrial Mechanical Engineer I will perform industrial and mechanical engineering services on industrial process projects of small to large scope for facilities that process minerals, fertilizers, pulp and paper, and petrochemicals, among others.General ...
-
Sales Associate
3 weeks ago
CrossLink Life Sciences LLC Macon, United StatesSales Associate (Medical Device Sales, Joint Replacement) · Sales Job Type Full-time Description · is Strykers largest U.S. distributor and is focused on delivering healthcare providers unparalleled products and sales support for Joint Replacement, Trauma, Robotics, Spine, and ...
-
Senior Industrial Engineer I
3 weeks ago
Clark Nexsen Macon, United StatesWe seek to hire a Senior Industrial Mechanical Engineer I will perform industrial and mechanical engineering services on industrial process projects of small to large scope for facilities that process minerals, fertilizers, pulp and paper, and petrochemicals, among others. · Gene ...
-
Senior Industrial Engineer I
1 week ago
Clark Nexsen Macon, United StatesWe seek to hire a Senior Industrial Mechanical Engineer I will perform industrial and mechanical engineering services on industrial process projects of small to large scope for facilities that process minerals, fertilizers, pulp and paper, and petrochemicals, among others. · Gen ...
-
Industrial Mechanic Job
3 weeks ago
Armstrong World Industries Macon, United StatesPrimary location: Macon, Georgia Relocation offered: Employment status: Full-Time Travel: Non-compete: ((req_noncompete)) The estimated base salary range for this role is "x to X" per year. Individual pay is based upon location, skills and expertise, experience and other relevant ...
-
Stage Check Flight Instructor
3 weeks ago
InsideHigherEd Macon, United StatesJob Title: Stage Check Flight Instructor (Eastman Campus) · Location: MGA Eastman Campus · Regular/Temporary: Regular · Full/Part Time: Full-Time · Job ID: 269734 · About Us Middle Georgia State University (MGA), a multi-campus, baccalaureate and graduate degree granting public i ...
-
Industrial Mechanic Job
1 week ago
Armstrong World Industries Macon, United StatesPrimary location: · Macon, Georgia · Relocation offered: · Employment status: · Full-Time · Travel: · Non-compete: · ((req_noncompete)) · The estimated base salary range for this role is "x to X" per year. · Individual pay is based upon location, skills and expertise, experience ...
-
Stage Check Flight Instructor
1 week ago
InsideHigherEd Macon, United StatesJob Title: Stage Check Flight Instructor (Eastman Campus) · Location: MGA Eastman Campus · Regular/Temporary: Regular · Full/Part Time: Full-Time · Job ID: 269734 · About Us Middle Georgia State University (MGA), a multi-campus, baccalaureate and graduate degree granting public i ...
-
Industrial Mechanical Technical Designer III
2 weeks ago
Clark Nexsen Macon, United States Full timeAn Industrial Mechanical Technical Designer III will apply engineering techniques to design and evaluate integrated systems for industrial production processes including human work factors, quality control, inventory control, logistics and material flow, cost analysis, and produ ...
-
Laboratory - MLT I
3 weeks ago
Atrium Health Payne, GA, United States Full timeAtrium Health is seeking a Medical Lab Technician for a job in Macon, Georgia. · Medical Lab Technician · ~ Discipline: Allied Health Professional · ~ Shift: 8 hours, days · ~ Employment Type: Staff · The Medical Technologist Specialist is the technical expert in their assig ...
-
Travel Medical Lab Scientist
3 weeks ago
TalentBurst, Inc Warner Robins, GA, United StatesTalentBurst, Inc is seeking a travel Medical Lab Scientist for a travel job in Warner Robins, Georgia. · Job Description & Requirements · Specialty: Medical Lab Scientist · Discipline: Allied Health Professional · Start Date: ASAP · Duration: 9 weeks · 40 hours per week · Shift: ...
-
Travel Medical Lab Scientist
3 weeks ago
TalentBurst, Inc Warner Robins, GA, United StatesTalentBurst, Inc is seeking a travel Medical Lab Scientist for a travel job in Warner Robins, Georgia. · Job Description & Requirements · Specialty: Medical Lab Scientist · Discipline: Allied Health Professional · Start Date: ASAP · Duration: 9 weeks · 40 hours per week · Shift: ...
-
Travel Medical Lab Scientist
2 weeks ago
TalentBurst, Inc Warner Robins, GA, United StatesTalentBurst, Inc is seeking a travel Medical Lab Scientist for a travel job in Warner Robins, Georgia. · Job Description & Requirements · Specialty: Medical Lab Scientist · Discipline: Allied Health Professional · Start Date: ASAP · Duration: 9 weeks · 40 hours per week · Shift: ...
-
SCA Elec Tech Maintenance 3
1 week ago
Northrop Grumman Warner Robins, United StatesUS CITIZENSHIP REQUIRED FOR THIS POSITION: Yes · RELOCATION ASSISTANCE: No relocation assistance available · CLEARANCE TYPE: Secret · TRAVEL: Yes, 10% of the Time · Description · At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems tha ...
-
F-22 Field Service Engineer
1 day ago
Lockheed Martin Corporation Warner Robins, United StatesJob ID: 667073BR Date posted: May. 29, 2024 Program: F-22 Faster IIDescription:At Lockheed Martin Rotary and Mission Systems, we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is with ...
ACI - Automation Controls Instrumentation Integrator - Macon, United States - Luxus
Description
Job Description
Job DescriptionA Senior Automation Controls Integrator will perform numerous Controls Engineering-related tasks, including but not limited to assisting with the assessment, development, installation, implementation, commissioning, monitoring, and maintenance of custom control systems in heavy industrial or manufacturing facilities.
Specific responsibilities include but are not limited to the following:
Education, Technology, and Experience
4+ years of experience supervising automation control integrators is desired
Additional Knowledge, Skills, and Experience