- You will use knowledge of mechanical and electro-mechanical engineering to perform test procedures on undersea maritime and warfare systems, underwater vehicles, and antisubmarine warfare training targets.
- You will revise processes and procedures on systems and targets.
- You will develop troubleshooting and re-testing methods for assigned systems and targets.
- You will develop and maintain bills of material for projects.
- You will identify and recommend solutions to unusual problems
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty
- This position is covered under the Defense Acquisition Workforce ImprovementAct (DAWIA)
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites
- OR
- Applicants may substitute the following education for the required experience, provided it demonstrates the knowledge, skills and abilities necessary to do the work of the position.
- Have successfully completed a 5 year program of study of at least 160 semester hours leading to a bachelor's degree in engineering and have one year of appropriate professional experience that required and was characterized by 1) professional knowledge of engineering, 2) professional ability to apply such knowledge to engineering problems, and 3) positive and continuing development of professional knowledge and ability; OR
- Have successfully completed a bachelor's degree with superior academic achievement and I have one year of professional engineering experience that required and was characterized by 1) professional knowledge of engineering, 2) professional ability to apply such knowledge to engineering problems, and 3) positive and continuing development of professional knowledge and ability; OR
- A master's or equivalent graduate degree; OR
- Two full years of progressively higher level graduate education leading to a master's or equivalent graduate degree; OR
- Have successfully completed three full years of progressively higher level graduate education leading to a Ph.
- A combination of experience and graduate education as described above that equates to one year of experience
-
Videographer with Security Clearance
2 weeks ago
RMGS, Inc. Coronado, United StatesPosition Overview RMGS, Inc. is currently recruiting a Videographer in Coronado, California, in support of the Naval Special Warfare Center (NAVSPECWARCEN). This position is contingent upon contract award. Roles and Responsibilities * Create engaging short-form and long-form vide ...
-
PIPEFITTER with Security Clearance
3 weeks ago
Department of the Navy point loma complex, United StatesSummary You will serve as a Pipefitter in the Temporary Services Shop, Production Resources Department of PORTSMOUTH NAVAL SHIPYARD. Duties * You will cut, thread, bend, and assemble pipefittings using shop machinery and equipment. * You will position, secure, and connect piping ...
-
CPSO with Security Clearance
5 days ago
Leidos San Diego, United StatesR Description Leidos has a career opening for a CPSO located in San Diego, CA. Primary Responsibilities · • The successful candidate will interface with all levels of Leidos personnel and government management personnel to ensure contract security compliance with National Industr ...
-
ELECTRICIAN with Security Clearance
3 weeks ago
Department of Defense point loma complex, United StatesDuties * You will install, operate, shift, remove, maintain, and repair various temporary electrical systems such as lights, power, ventilation, dehumidification, heating, and waterfront telephone services. * You will maintain and repair shop electrical equipment. * You will prov ...
-
ELECTRICIAN with Security Clearance
3 weeks ago
Department of the Navy point loma complex, United StatesSummary You will serve as an Electrician in the Temporary Services Shop, Production Resources Department, Portsmouth Naval Shipyard Detachment-San Diego (PNSDET-SD), Point Loma Complex, San Diego, California. Duties * You will install, operate, shift, remove, maintain, and repair ...
-
ENGINEER with Security Clearance
3 weeks ago
Department of the Navy San Diego, United StatesSummary This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may no ...
-
PIPEFITTER with Security Clearance
3 weeks ago
Department of Defense point loma complex, United StatesDuties * You will cut, thread, bend, and assemble pipefittings using shop machinery and equipment. * You will position, secure, and connect piping systems with various fixtures. * You will make minor repairs to hoses, pumps, and fittings. * You will hook up hoses, pumps, and fitt ...
-
TECHNICIAN with Security Clearance
2 weeks ago
Department of the Navy San Diego, CA, United StatesSummary You will serve as a TECHNICIAN in the Systems Integration Department (G), Guns Division (G3) of NAVSURFWARCEN IH DIV located at San Diego, California · This position is part of the Warfare Centers Personnel Demonstration Project · The NT-4 pay band encompasses positions e ...
-
MASON with Security Clearance
2 weeks ago
Department of the Navy San Diego, CA, United StatesSummary This is a public notice flyer to notify interested applicants of anticipated vacancies · Applications will not be accepted through this flyer · Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered · There may or may ...
-
TECHNICIAN with Security Clearance
2 weeks ago
Department of Defense San Diego, CA, United StatesDuties · • You will provide In Service Engineering support and representation of the Minor Caliber Guns Branch (Code G32) for the The west coast Gun Weapon System Replacement Program (GWSRP). · • You will provide technical support for daily operations and coordinate priorities an ...
-
WELDER with Security Clearance
5 days ago
Department of the Navy San Diego, United StatesSummary You will serve as a WELDER in the Production Resources Department, Shop 084, of PSNS and IMF, San Diego Detachment, San Diego, CA. Duties * You will use flame and plasma arc cutting processes to trim parts before welding to ensure proper alignment or fit, to remove obstru ...
-
WELDER with Security Clearance
5 days ago
Department of Defense San Diego, United StatesDuties * You will use flame and plasma arc cutting processes to trim parts before welding to ensure proper alignment or fit, to remove obstructions or to cut materials when necessary on site * You will lay out work from specifications and oral instructions * You will set up prehe ...
-
WELDER with Security Clearance
3 days ago
Department of the Navy San Diego, United StatesSummary You will serve as a WELDER in the Production Resources Department, Shop 084, of PSNS and IMF, San Diego Detachment, San Diego, CA. Duties * You will use flame and plasma arc cutting processes to trim parts before welding to ensure proper alignment or fit, to remove obstru ...
-
SUPERVISOR with Security Clearance
2 weeks ago
Department of the Navy point loma complex, United StatesSummary You will serve as a SUPERVISOR in the LOGISTICS AND FLEET SUPPORT of NAVWARSYSCEN PACIFIC SAN DIEGO CA. Duties * You will responsible for a broad range of demanding and complex procurement, assistance, and non-procurement instruments * You will research and development la ...
-
WELDER with Security Clearance
3 days ago
Department of Defense San Diego, United StatesDuties * You will use flame and plasma arc cutting processes to trim parts before welding to ensure proper alignment or fit, to remove obstructions or to cut materials when necessary on site * You will lay out work from specifications and oral instructions * You will set up prehe ...
-
Special Security Officer with Security Clearance
2 weeks ago
Cydecor San Diego, CA, United StatesCydecor is a premier Federal Government solutions provider, delivering differentiated innovations in mission systems and business platforms · We leverage leading-edge secure systems and software development, backed by industry-leading subject matter expertise, and business intell ...
-
ClearanceJobs San Diego, United StatesAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advanc ...
-
Videographer with Security Clearance
2 weeks ago
People, Technology and Processes LLC Coronado, United StatesPosition Title: Videographer Location: Coronado, CA. Clearance Level: Secret Responsibilities (including but not limited to): * The Contractor shall create engaging short-form and long-form video content for distribution on social media channels and otherwise as requested by PAO. ...
-
Leidos Coronado, United StatesR Description The Digital Modernization Sector at Leidos is seeking an experienced Industrial Security Representative for the Next Generation Enterprise Network (NGEN) Service Management, Integration, and Transport (SMIT) contract in the San Diego, California area. The candidate ...
-
Maintainability Engineer with Security Clearance
3 weeks ago
GeoLogics Corporation San Diego, United StatesGeologics is seeking a talented Maintainability Engineerto work with one of our national aerospace and defense partners based in San Diego, CA. This is a 6-month contract assignment with the potential to extend. A permanent position may be offered, dependent on your performance d ...
ENGINEER with Security Clearance - San Diego, CA, United States - Department of Defense
Description
DutiesThis requirement is called time-in-grade
Time-in-grade requirements must be met by the closing date of this announcement.
Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
Qualifications In addition to the basic requirements for the series, your resume must demonstrate at least one year of specialized experience at or equivalent to the next lower level ND-02 (GS 05-08 equivalency) in the Federal service or equivalent experience in the private or public sector as a professional Engineer troubleshooting and recommending solutions in partnership with supervisors and other engineers to solve engineering issues and maintain Naval systems
Education may be substituted for specialized experience as follows:
or equivalent degree; OR
Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment
Education Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM)
Qualifications Standards Manual:
Successful completion of a professional engineering degree
To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics
Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position
OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico
Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g.
, State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U
S
Office of Personnel Management
For more information, please visit:
OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)
The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g.
, engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g.
, in interdisciplinary positionsAdditional information This position is covered by the Department of Defense Priority Placement Program
Additional vacancies may be filled by this announcement
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments
Federal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants
Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ)
To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation
ICTAP Applicants:
To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher
ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location
Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate
For more information about ICTAP eligibility please review the following link: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ)
A BQ military spouse possess