Jobs
>
Stafford

    Process Technician Injection Molding - Stafford, United States - General Technologies, Inc.

    General Technologies, Inc.
    General Technologies, Inc. Stafford, United States

    2 weeks ago

    Default job background
    Description

    Job Description

    Job DescriptionGeneral Technologies, Inc., has immediate openings for Process Technicians on 3rd shift (10:45pm - 7:15am). Must have prior experience as a process technician in a injection molding facility.Job Description
    • Perform setup, startup, diagnosis and troubleshooting of the injection molding presses, all auxiliary equipment and all secondary production equipment
    • Independently perform machine adjustments within allowable parameters and perform routine machine maintenance tasks that optimizes efficiency of the tool
    • Communicates problems and corrective action with Maintenance Manager and Shift Supervisor
    • Document all records related to downtime, scrap, repairs, process deviation, etc.
    • Maintain positive employee relations and adhere to Company policies and safety standards
    • House Keeping must keep work area clean at all times
    • Reports to Maintenance Manager

    Requirements:

    • 2+ years' experience as a Process Technician in Plastic Injection Molding
    • Scientific Molding Experience is preferred
    • Experienced with two-shot molding/over molding
    • Able to perform P.M. on production molds. (ex: mold cleans, basic insert changes, proper greasing of tools)
    • Able to perform programming functions and troubleshoot robotics and automation systems
    • Adherence to health and safety regulations (e.g. constant use of protective gear)
    • Attention to detail
    • Teamwork and communication skills
    • Physical stamina and strength
    • Must be flexible; able to work extended hours and weekends when required
    • Attendance must be 98% or better
    • Must be able to read and write
    • High school diploma is preferred but not required

    Schedule:

    • 3rd Shift - Monday - Friday, 10:45pm - 7:15am (May have to work extended hours and/or weekends as needed)
    • $2.00/hour shift differential

    Physical Demands:

    The description below is intended to describe the general content and requirements for the performance of this job but is not limited to:

    • While performing the duties of the job, the employee may be required to stand; walk; sit; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell.
    • The employee must be able to lift and/or move up to 50 pounds.
    • Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.

    Some duties may be removed at any time and new duties may be added as GTI continues to grow. If and as required under federal or state law, upon request, reasonable accommodations which do not create an undue hardship will be considered, discussed, offered and implemented (if accepted) to enable persons with defined disabilities to overcome barriers to the performance of essential functions of the position.



    Job Posted by ApplicantPro
  • C.E. Shepherd Co., LP

    Plastic Injection Molding Operator

    2 days ago

    C.E. Shepherd Co., LP Houston, United States

    '''Duties:''' · - Operate and monitor injection molding machines to produce high-quality plastic parts · - Set up molds and perform mold changes as needed · - Inspect parts for defects and make adjustments to the machine as necessary · - Trim excess material from parts using hand ...

  • General Technologies, Inc.

    Process Technician Injection Molding

    1 week ago

    General Technologies, Inc. Stafford, United States

    Job Description · Job DescriptionGeneral Technologies, Inc., has immediate openings for Process Technicians on 1st shift (6:45 pm - 3:15 pm). Must have prior experience as a process technician in a injection molding facility.Job DescriptionPerform setup, startup, diagnosis and tr ...

  • General Technologies, Inc.

    Process Technician Injection Molding

    1 week ago

    General Technologies, Inc. Stafford, United States

    Job Description · Job DescriptionGeneral Technologies, Inc., has immediate openings for Process Technicians on 2nd shift (2:45 pm - 11:15 pm). Must have prior experience as a process technician in a injection molding facility.Job DescriptionPerform setup, startup, diagnosis and t ...

  • EnPro

    Press Operator-Maplan/Injection Molding

    2 weeks ago

    EnPro Houston, United States

    ESSENTIAL FUNCTIONS: Operates a series of hydraulic presses in various molding operations consisting of long or short production runs of products made of various rubber compounds. Completes opening of press/mold by various manual means and closes partially by manual means and pus ...

  • Milwaukee Electric Tool Corporation

    Weekend - y Shift Supevisor

    1 week ago

    Milwaukee Electric Tool Corporation West Bend, United States

    Job Description: · - WE CREATE EMPOWERED LEADERS At Milwaukee Tool we firmly believe that our People and our Culture are the secrets to our success - so we give you unlimited access to everything you need to provide technical solutions on our Operations Team. · Behind our doors y ...

  • General Plastics & Composites, LP

    Molding Tech 1

    5 days ago

    General Plastics & Composites, LP Houston, United States

    1. Work in a safe manner in a safe environment. · 2. Responsible to perform to the production schedule to include starting production on time to the assigned machines. · 3. Capable of producing rubber on the mills. · 4. Capable of laying out rubber from the lab mills. · 5. Capabl ...

  • Western Container Corporation

    Corporate Quality Lab Tech

    1 week ago

    Western Container Corporation Houston, United States

    : · Get your foot in the door and you will start learning our precision laboratory testing and measurement systems with opportunities for a full career. You will have a variety of interesting assignments and responsibilities in the lab. Each will be tailored to your experience an ...

  • Igloo Products Corp

    Set Up Technician

    6 days ago

    Igloo Products Corp Katy, United States

    **Overview** · **Who We Are**: · - Millions of people around the world use Dometic products. They are campers, RV users, boat owners, and lovers of the outdoor life. They all share the same intense feelings - a longing for freedom and adventure, a desire to explore the world and ...

  • Worldwide Oilfield Machine

    Production Supervisor

    6 days ago

    Worldwide Oilfield Machine Houston, United States

    **Who We Are** · Worldwide Oilfield Machine (WOM) is a premium flow control and pressure containment systems manufacturer. Our employee-driven company exists to partner with relevant stakeholders in local communities in which we operate, delivering reliable, innovative, cost-effi ...

  • TECH 2000

    Polymer Lab Technician

    3 hours ago

    TECH 2000 Katy, United States

    **NOW HIRING - Lab Technician** · This position supports the Quality Control Laboratory and Production through the routine analysis of full scale manufactured products (raw materials, in process and finished product) via prescribed analytical techniques; ensures optimal equipment ...

  • Material Difference Technologies

    Laboratory Technician

    1 week ago

    Material Difference Technologies Houston, United States

    Quality Lab Tech for Plastic Resin Testing · This job requires daily collection of plastic resin samples and testing them for physical properties. · Job duties: · Collection, labeling, organizing of samples, Physical properties testing (melt flow, flex modulus, tensile, Gardner i ...

  • GENERAL TECHNOLOGIES INC

    Maintenance Technician

    1 week ago

    GENERAL TECHNOLOGIES INC Stafford, United States

    General Technologies, Inc., has an immediate opening for a Maintenance Technician with experience working with maintenance on Injection Molding MachinesMaintenance Technicians are responsible for maintaining production and facility equipment to include installation, setup, preven ...

  • Winchester Interconnect

    Cable Assembler

    1 week ago

    Winchester Interconnect Houston, United States

    **_At Winchester Interconnect, we dream big, have fun, and get stuff done_** · Our mission is to be the best Interconnect company in the world, the best company to work for, and the best company to do business with. How do we do that? We focus on our people. We're committed to en ...

  • Material Difference Technologies

    Quality Assurance Technician

    2 weeks ago

    Material Difference Technologies Houston, United States

    **Quality Assurance Technician** · **Job description**: · Oversee the formulation process within our plant, ensuring accuracy and adherence to specifications. · **Job duties**: · Material Allocation: Review and allocate materials for different customers, maintaining precision and ...

  • H-E-B

    Houston Milk

    1 week ago

    H-E-B Houston, United States

    **Responsibilities**: · H-E-B Manufacturing's goal is to achieve superior self-manufactured products through high-quality, low-cost foods. We're committed to Partner growth, development, and training while continually achieving superior levels of service. · As a Manufacturing Pro ...

  • H-E-B

    Houston Bakery

    1 week ago

    H-E-B Houston, United States

    **Responsibilities**: · H-E-B Manufacturing's goal is to achieve superior self-manufactured products through high-quality, low-cost foods. We're committed to Partner growth, development, and training while continually achieving superior levels of service. · As a Manufacturing Pro ...

  • North West Rubber

    Production Manager

    1 week ago

    North West Rubber Houston, United States

    **Summary**:Reporting to the Plant Manager, the Production Manager will plan, organize, direct, control and evaluate the operations of the production department of the Houston plant. · **Job Type**: Full-time, permanent (Crosby, TX) · **Schedule**: 12 hour shift 7AM-7PM · **Essen ...

  • General Technologies, Inc.

    Production Shift Supervisor

    4 days ago

    General Technologies, Inc. Stafford, United States

    Job Description · Job DescriptionGeneral Technologies, Inc. is looking to hire another Production Supervisor to provide additional support to our team · Purpose: Accomplishes manufacturing staff results by communicating job expectations; planning, monitoring, and appraising job ...

  • General Technologies, Inc.

    Maintenance Technician

    2 days ago

    General Technologies, Inc. Stafford, United States

    Job Description · Job DescriptionGeneral Technologies, Inc., has an immediate opening for a Maintenance Technician with experience working with maintenance on Injection Molding Machines · Maintenance Technicians are responsible for maintaining production and facility equipment to ...

  • Niagara Bottling

    Sr Maintenance Technician

    1 day ago

    Niagara Bottling Missouri City, United States

    At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. · Consider applying here, if you want to: · * Work in an entrepreneurial and dynamic environment with a chance to ma ...