- Comply with all Good Manufacturing Practices (CGMP) requirements to ensure products are consistently produced and controlled according to the Quality System.
- Has the responsibility of following established documentation for product manufacturing.
- Maintains cleanliness of work areas, machines, tools, and equipment.
- Takes direction within the manufacturing cell from upper-level operators assigned to that cell.
- Will be proficient in the task of loading components into product specific tools.
- Primary function, processing, and product fabrication.
- Performs in-process visual inspections with and without the use of microscopes in accordance with the requirements stated in the Process Control Document or as otherwise stated on drawings or work instructions.
- Performs pre/post-weld operations such as assembly and part cleaning.
- Performs workstation set-ups on qualified operations.
- Performs basic workstation set up and troubleshooting tasks.
- Performs various dimensional inspection using specific gauges, dimensional inspection systems, verniers and micrometers.
- May perform weld operations.
- Works with small devices to load fixtures and process equipment.
- Makes basic measurements and math calculations relative to tolerances, dimensions.
- Working knowledge of drawings, ability to interpret nomenclature and dimensions.
- Provides direction within the manufacturing cell to associates assigned to assist them.
- Assists Quality Control with inspection duties as required.
- Recognizes quality issues and communicates these issues to Quality and/or Supervisor.
- Must accurately document all work performed on inspection reports and customer travelers.
- Assists in packaging of finished goods as needed.
- Reliable, consistent, and punctual attendance is an essential function of the job.
- Complies with company, quality, and safety standards, policies, and procedures.
- Other duties as assigned.
- High school diploma or General Education Degree (GED) is required,
- 1+ years' experience in medical device industry and manufacturing required.
- Be able to read, write and speak fluent English.
- Must be able to frequently lift and/or move up to 10 pounds, and occasionally lift and/or move up to 50 pounds.
- Strong attention to detail, Knowledge of ISO & FDA requirements a plus.
- Experience with LEAN manufacturing a plus.
- Ability to work in an environment subject to fluctuations in heat, humidity, fumes, odors, dust, and noise.
- Knowledge of how to set up and operate workstations.
- Ability to provide information to engineers for determining root cause in order to identify the appropriate corrective actions.
- Knowledge of performing visual and dimensional inspections.
- Strong interpersonal skills to establish and maintain cooperative and effective working relationships.
- Meets all requirements of Operator Assembler I,
-
Receiver - 1st Shift
5 days ago
Garelick Farms New Britain, United StatesGENERAL PURPOSE · Perform all duties related to the pumping of incoming raw milk or cream from the tanker trucks into the proper storage tanks. Document and record volume into inventory with a heavy emphasis on quality of product being received. · JOB DUTIES AND RESPONSIBILITIES ...
-
Packer - 1st Shift
2 days ago
Sig Sauer Inc Newington, United States**Packer** · **1st Shift** · **Position Summary**: · Packages materials and products manually by performing the work/packaging instructions specified for each product or part. Visually verifies that parts and or finished products are in compliance with SIG SAUER's quality standar ...
-
Chaplain - 1st Shift
3 days ago
Trinity Health Windsor Locks, United StatesThe Chaplain develops, conducts and participates in programs of spiritual care to promote healthy communities, facilitating the inclusion of faith leaders from churches, synagogues and mosques, etc. in the provision of Spiritual Care for their member Chaplain, 1st Shift, Healthca ...
-
Electronic Repair Technician Ii 2nd Shift
2 weeks ago
Collins Aerospace Windsor Locks, United States**Date Posted**: · **Country**: · United States of America · **Location**: · 02: Building 02 Windsor Locks One Hamilton Road, Windsor Locks, CT, 06096 USA · **Position Role Type**: · Onsite · This is one of the most rapidly growing facilities across the company. Under moderate su ...
-
1st Shift Lab Technician
1 day ago
Actalent Mansfield Center, United States Full timeHiring for a full time Quality Control Technician in Storrs, CT · Shifts Available: Monday – Friday- NO WEEKENDS. · 1st 8AM-4PM · This is a full-time, long-term position with full benefits and weekly pay. · Description: · Responsible for the qualification and release testing of a ...
-
Assembler - 1st shift
6 days ago
Broan-NuTone Windsor Locks, United States** Assembler - 1st shift (3841B)** · **Job Category****:** Production Assembly **Requisition Number****:** ASSEM03841 Showing 1 location **Job Details** · **Description** · Broan leads the residential ventilation industry with forward-thinking products including range hoods, v ...
-
Toolmaker - 1st Shift - M-f - 7am-330pm
3 days ago
Stanley Black & Decker East Longmeadow, United StatesIt takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World. Sound like you? Join our top-notch team of 54,000+ professionals in 6 ...
-
Cip Operator- 1st Shift
5 hours ago
Rich Products Corporation New Britain, United StatesRich's, also known as Rich Products Corporation, is a family-owned food company dedicated to inspiring possibilities. From cakes and icings to pizza, appetizers and specialty toppings, our products are used in homes, restaurants and bakeries around the world. Beyond great food, o ...
-
HVAC Technician- 1st shift
5 days ago
Raytheon Technologies Corporation Windsor Locks, United StatesWork from complex blueprints, schematics, drawings, written and verbal instructions to carry out work on heating, ventilation and air-conditioning (HVAC) equipment. Operate, program and troubleshoot problems with energy management systems using modu Technician, HVAC, 1st Shift, O ...
-
Janitor Modified 1st Shift
2 weeks ago
Broan-NuTone Windsor Locks, United States** Janitor Modified 1st Shift (4131A) $17/hr Starting Pay** · **Job Category****:** Facilities Management **Requisition Number****:** SEASO004131 Showing 1 location **Job Details** · **Description** · Broan leads the residential ventilation industry with forward-thinking produ ...
-
Janitor Modified 1st Shift
1 week ago
Broan-NuTone Windsor Locks, United States** Janitor Modified 1st Shift (4131A)** · **Job Category****:** Facilities Management **Requisition Number****:** SEASO004131 Showing 1 location **Job Details** · **Description** · Broan leads the residential ventilation industry with forward-thinking products including range ...
-
Warehouse Shipper/receiver 1st Shift
1 week ago
J & J Snack Foods Hatfield, United States**: Ensure that all trucks both incoming and outgoing are loaded or unloaded according to the paperwork. Also, employees are required to make sure all necessary paperwork is filled out properly.** · **ESSENTIAL FUNCTIONS**: · - Make sure truck wheels are chocked. · - Double check ...
-
QC Technician Openings- 1st And 2nd Shift
6 days ago
Actalent Mansfield Center, United States Full timeHiring for a full time Quality Control Technician in Storrs, CT · Shifts Available: Monday – Friday- NO WEEKENDS. · 1st 8AM-4PM · 2nd 2PM-10PM · This is a full-time, long-term position with full benefits and weekly pay. · Description: · Responsible for the qualification and relea ...
-
Assembler - 1st Shift
6 days ago
OMG Agawam, United StatesJob Description · Assembler · OMG Inc. is a leading manufacturer of fastening products and technologies for the commercial roofing and construction industries worldwide. Headquartered in western Massachusetts, OMG is an equal opportunity employer prioritizing the safety of our e ...
-
Assembler - 1st Shift
6 days ago
OMG Agawam, United StatesJob DescriptionAssemblerOMG Inc. is a leading manufacturer of fastening products and technologies for the commercial roofing and construction industries worldwide. Headquartered in western Massachusetts, OMG is an equal opportunity employer prioritizing the safety of our employee ...
-
1st Shift
6 days ago
Jackson Furniture Ind. Front Royal, United StatesJob Description · Job DescriptionJob summary: · Employees work either individually or as a team in manufacturing and distribution of sofas, love seats, and chairs. · Summary of essential job functions: · Feed raw materials into production machinery · Supply materials to other de ...
-
Welder 1st shift
2 weeks ago
MB Aerospace Holdings Inc East Granby, United StatesMB Aerospace is an international group providing complex engineering solutions to some of the key names in the Aerospace and Defense market. Operating from sites close to our key customers in North America and Europe, the MB Aerospace group provides advanced technological solutio ...
-
ELECTRICAL TECHNICIAN III 1st shift
5 days ago
Raytheon Technologies Corporation Windsor Locks, United StatesWork from complex blueprints, drawings, schematics, service manuals and written and verbal instructions. Respond to electrical problems of various complexities and voltages, make repairs and request assistance on more complicated problems. Use a va Electrical Technician, Technici ...
-
Part time Assembler 1st shift
6 days ago
Broan-NuTone Windsor Locks, United States Part time** Part time Assembler 1st shift (4091A) $17+/hr Starting Pay** · **Job Category****:** Production Assembly **Requisition Number****:** PARTT004091 Showing 1 location **Job Details** · **Description** · Broan leads the residential ventilation industry with forward-thinking pro ...
-
1st Shift CNC Programmer
2 weeks ago
Aerotek Agawam, United States**Description:** · We are currently hiring a 1st shift CNC programmer in Agawam, MA · In this the role the ideal candidate needs to have strong experience using CAM software, understand how to utilize Microsoft office, and open to being hands on with our machinery. You will be ...
Operator Assembler II-1st shift - Enfield, United States - Cirtec Medical
Description
THIS POSITION IS ELIGIBLE FOR A $2,250.00 NEW HIRE SIGN-ON BONUSJOB SUMMARY
This position is primarily responsible for operating workstations and associated systems used in the manufacturing of products sold to our customers. This position is expected to work with lower-level Operators along with higher level Technicians to effectively meet or exceed expectations for product quality and production rates. In this position they must have a basic knowledge of how to set up and operate workstations, perform visual and dimensional inspections needed to manufacture the products at Cirtec.
ESSENTIAL RESPONSIBILITIES
An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.
QUALIFICATIONS
Work is performed in a manufacturing environment. The noise level in the work environment is usually moderate. The work environment characteristics described here are representative of those an individual encounters while performing the essential functions of this position.
EEO STATEMENT
Cirtec Medical Corporation is an Equal Opportunity Minority/Female/Individuals with Disabilities/Protected Veteran and Affirmative Action Employer
Cirtec Medical Corporation considers for employment and hires qualified candidates without regard to age, race, religion, color, sex, sexual orientation, gender identity, national origin, ancestry, protected veteran or disability status or any factor prohibited by law. Cirtec Medical Corporation and all of its related companies fully endorse equal opportunity for all. Cirtec Medical provides reasonable accommodation for qualified individuals with disabilities and disabled veterans in the job application process.