Civil Engineer - Lakewood, United States - U.S. Department of the Interior

Description

Clarification from the agency

U.S. Citizens and U.S. Nationals

Duties

Job duties listed are at the full performance level.

- Performs engineering analyses to include performing and/or coordinating technical planning activities; data collection to include validation and management; modeling and data analyses; analyses of site location and/or conditions; risk estimation and analyses; or analyses of instrumentation data.
- Completes and/or reviews engineering designs to include: 1) planning and conducting engineering studies or evaluations such as preliminary, appraisal, feasibility, final design, and value planning/value engineering; 2) creating, performing, reviewing, checking, and/or modeling engineering designs; 3) developing/drafting design criteria, procedures, and instructions; 4) contributing to the design and/or modifications of new or existing features to mitigate static, dynamic, and hydrologic/hydraulic loadings; or 5) design, installation, and maintenance of instrumentation systems to provide engineering data for analysis and/or operational decision support.
- Prepares and reviews technical documentation such as technical memorandums and reports, engineering study analyses and results, correspondence, publications, design criteria, calculations, design summaries, design standards, designer's operating criteria, operating procedures, evaluation and oversight reports.
- Plans, schedules, coordinates, and conducts civil engineering facility examinations, reviews, and/or inspections.
- Provides technical reviews, peer reviews, and checking of designs, drawings, engineering analysis, and technical documents, specifications, and contract correspondence, ensuring documents are accurate and quality assurance processes were followed.
- Develops, monitors, and manages project plans that outline the scope, schedule, and budget of assigned projects.

Requirements

Conditions of Employment

You must be a U.S. Citizen or U.S. National.
You must be suitable for federal employment, determined by a background investigation.
You must submit a resume and supporting documentation (see Required Documents).
You must submit eligibility documents for veterans consideration (see Required Documents).
You must meet any minimum education and/or experience requirements (see Qualifications).
You must submit transcript(s) to verify education requirements (see Qualifications/Education).

Qualifications

To qualify for the Civil Engineer GS /11, you must meet BOTH the Basic Qualification Requirement and the Additional Requirements. Your resume must clearly describe your relevant experience. A copy of your unofficial transcripts must be provided with your application.

BASIC QUALIFICATION REQUIREMENT

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
-or-
B. Combination of education and experience: college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
-or-
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
-or-
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.-or-4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

~AND~

ADDITIONAL REQUIREMENT
In addition to meeting the basic education requirement, you must also meet one of the following for each of the grade levels. Specialized experience is obtained after the requirements noted under 'Basic Qualifications Requirements' are met.

GS-09

A. Specialized Experience: 1 year of specialized experience equivalent in difficulty and complexity to at least the GS-07 level in the Federal service. Examples of specialized experience may include performing a wide variety of structural, hydraulic analyses, dynamic design of civil and building structures including pumping plants, power houses, fish facilities, steel buildings and other structures under close supervision.
-or-
B. Education: 1 year of graduate-level education or completed a 5-year program of study of at least 160 semester hours leading to a bachelor's degree in engineering.
-or-
C. Combination of Education and Experience: A combination of education (above a bachelors) and specialized experience may be used to qualify for this position if the computed percentage of the requirements is at least 100%.
-or-
D. Superior Academic Achievement. Superior Academic Achievement is based on 1) class standing, 2) grade-point average, or 3) honor society membership. Specific requirements are: 1) Class Standing: Upper third of graduating class based on completed courses; 2a) Grade Point Average: 3.0 or higher as recorded on official transcript or as computed based on 4 years of education; 2b) based on courses completed during the final full 2 years of curriculum; or 2c) 3.5 or higher based on average of courses completed in the specific major field of study; or 3) Honor Society Membership: Election to membership in a national scholastic honor society listed in the Association of College Honor Societies, Booklet of Information, and/or Baird's Manual of American College Fraternities (membership in a freshman honor society cannot be used to meet it).

GS-11

A. Specialized Experience: 1 year of specialized experience equivalent in difficulty and complexity to at least the GS-09 level in the Federal service. Examples of specialized experience may include designing pipelines, tunnels, canals, control appurtenances, detention/retention ponds, site layout/grading, hydroelectric powerplants, pumping plants, water treatment plants, switchyards, office and O&M buildings, fish facilities, earthen dams, concrete dams and/or other heavy civil works involving complex reinforced concrete structures.
-or-
B. Education: 2 years of progressively higher-level graduate education leading to a master's degree or master's or equivalent graduate degree leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position.
-or-
C. Combination of Education and Experience: A combination of education (noted in choice B) and specialized experience (noted in choice A) may be used to qualify for this position if the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

You must include months, years and hours per week worked to receive credit for your work and/or volunteer experience. One year of specialized experience is equivalent to 12 months at 40 hours per week. Part-time hours prorated. You will not receive any credit for experience that does not indicate exact hours per week.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

This vacancy announcement allows substituting of education. You must submit a copy of college transcript(s) (unofficial copy is acceptable) to support claimed education if substituting education for experience. Transcripts must include the name of the college or university and date the degree was conferred. A typed list of courses, grades, semester/quarter hours, GPA, etc. will not be accepted. Non-submission may result in being rated not-qualified for the position.

This position has a mandatory education requirement. You must submit a copy of college transcript(s) (unofficial copy is acceptable) to support claimed education. Transcripts must include the name of the college or university and date the degree was conferred. Non-submission will result in being rated not-qualified for the position.

You will be required to provide official college transcripts to verify educational qualifications, if selected. An official transcript must be sent directly from the University's Registrar's office and must be provided from the institution awarding the degree. Academic transcripts certified by notary publics are NOT official. Official transcripts must be submitted prior to reporting to work as a condition of employment. Failure to submit official transcripts may be grounds for dismissal or rescission of the job offer.

Accreditation: Only education from an accredited college or university recognized by the Department of Education is acceptable to meet education requirements or to substitute for experience, if applicable. For additional info, refer to the and .

Foreign Education: To receive credit for education completed outside the United States, you must show proof that the education has been submitted to a private organization that specializes in interpretation of foreign educational credentials and such education has been deemed at least equivalent to that gained in conventional U.S. education programs. For additional info, refer to the ..