Jobs
>
Washington, D.C.

    general engineer - Washington, DC, United States - Department of The Navy

    Default job background
    Description
    DutiesYou will serve as the program office lead for submarine escape and survivability.

    You will advise others as the expert in submarine escape and survivability as well as establish submarine escape and survivability technical requirements.

    You will lead and provide material solutions for escape and survivability requirements, and changes to the requirements throughout the life cycle.

    You will lead and resolve technical issues associated with submarine escape and survivability systems.
    You will ensure escape and survivability requirements are properly implemented, to include monitoring escape and survivability status.
    Requirements Conditions of EmploymentMust be a US Citizen.
    Must be determined suitable for federal employment.
    Must participate in the direct deposit pay program.
    New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check.

    To learn more about E-Verify, including your rights and responsibilities, visit e-verify.govWithin the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.Males born after must be registered for Selective Service.

    This position is eligible for part time, substantial or ad-hoc telework at the discretion of management. This position may require you to report in person for an established number of days per pay period.
    You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty.

    Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.

    This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes. Qualifications

    FOR NH-04 (GS-14/15 equivalent): In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the next lower pay band, NH-03, (GS-13 equivalent) or grade level in the Federal service or equivalent experience in the private or public sector.


    Specialized experience must demonstrate the following:

    experience as a professional engineer leading projects to coordinate the design, integration, development, test, certification of submarines or related components.

    Additional qualification information can be found from the following Office of Personnel Management website:

    FOR 0801 Series:
    All Professional Engineering Positions(PDF file)

    Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social).

    Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

    Education
    Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM)

    Qualifications Standards Manual:
    Applicants must possess one or more of the following: For the NH-0801, Professional Engineering Series.
    - successfully completed a bachelor's degree (or higher) in engineering.

    To be acceptable, the program must:
    (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or
    (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
    OR
    - combination of college-level education, training, and/or technical experience that furnished
    (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and
    (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

    The adequacy of such background must be demonstrated by one of the following:

    (I)

    Professional registration or licensure:

    Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

    Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration; or
    (II)

    Written Test:
    Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or
    (III)

    Specified academic courses:

    Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above).

    The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above); or
    (IV)

    Related curriculum:

    Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance.

    Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.


    Additional informationCONTROL POINT STATEMENT:

    This hiring activity, within Naval Sea System Command (NAVSEA) Headquarters, has converted to the Acquisition Demonstration Project (AcqDemo) which is an alternate personnel system.

    This position has a control point. Thus, the salary range for this position is capped at GS-15, step 05 which is currently equivalent to $176,458. If your current salary is above this amount, your salary may be matched.
    This position is covered by the Department of Defense Priority Placement Program.
    Additional vacancies may be filled by this announcement.

    A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

    If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center.


    Federal annuitant information:

    The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants.


    Policy information may be found at:

    ICTAP Applicants:

    To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher.

    ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate.

    For more information about ICTAP eligibility please review the following link:

    Military Spouse Preference applicants will receive priority consideration at the Full Performance Level (FPL) and if determined to be Best Qualified at the FPL, and selected, must be placed at the FPL.

    A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.

    Certain incentives (such as Recruitment or Relocation) may be authorized to eligible selectees.

    A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee.

    A relocation incentive may be authorized. Help

    A career with the U.S. government provides employees with a comprehensive benefits package.

    As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding.

    Opens in a new windowLearn more about federal benefits.

    Review our benefitsEligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent.

    Contact the hiring agency for more information on the specific benefits offered.

    How You Will Be EvaluatedYou will be evaluated for this job based on how well you meet the qualifications above.

    In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered.

    Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position.

    Therefore, we encourage you to be clear and specific when describing your experience.

    When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement.

    You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following competencies:

    ACCOUNTABILITYENGINEERING PROJECT MANAGEMENTORAL COMMUNICATIONPROBLEM SOLVINGSYSTEMS ENGINEERING

    You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process.

    If selected, you may be required to provide supporting documentation.

    If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified.

    Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.
    All eligibility and qualifications requirements must be met by the closing date of this announcement.

  • Bureau of Engraving and Printing

    General Engineer

    3 weeks ago


    Bureau of Engraving and Printing Washington, United States

    Summary · This position is located at Bureau of Engraving and Printing (BEP), within the Quality Engineering Division. As a General Engineer (Quality Project Manager), you will provide expertise in methods and tools required to establish and maintain complex Quality Programs, su ...

  • Architect of the Capitol

    General Engineer

    3 weeks ago


    Architect of the Capitol Washington, United States

    Summary · This developmental engineer position is located in the Architect of the Capitol (AOC), Office of the Chief Operating Officer, Director, Utilities and Power Plant Operations, Assistant Director, Utility Distribution Division. This position is interdisciplinary and can b ...

  • PolyCon Solutions

    General Engineer

    2 weeks ago


    PolyCon Solutions Washington, United States

    Job Description · Job DescriptionDescription: · PolyCon Solutions is seeking a General Engineer to support our Federal Aviation Administration (FAA) client in cost estimating, scheduling, engineering, coordination, contracting, inspection, and acceptance of various infrastructure ...


  • Serco North America Washington, United States

    Position Description · If you are interested in supporting the Navy's #1 acquisition program and enjoy a challenging job which requires technical rigor and will build on your current level of expertise, Serco has an immediate opening that is a great opportunity for youTeam Subma ...


  • Naval Sea Systems Command Washington, United States

    Summary · You will serve as a SUPERVISORY GENERAL ENGINER for the SURFACE FLEET BRIDGE INTEGRATION-SHIP CONTROL SYSTEMS (BI-SCS) PROGRAM of NAVSEA HQ FIELD SUPPORT. · This position is part of the Department of Defense Civilian Acquisition Workforce Personnel Demonstration Projec ...


  • Booz Allen Hamilton Washington, United States Full time

    Generative AI Engineer The Opportunity: · As an experienced engineer, you know that machine learning is critical to understanding and processing massive datasets. In an increasingly connected world, massive amounts of structured and unstructured data open new opportunities. As ...


  • Salamander Washington DC Washington, United States Full time

    POSITION OBJECTIVE · The General Maintenance Engineer will perform general repairs in and around the hotel as needed. · ESSENTIAL JOB FUNCTIONS · Under direction of the Director of Engineering and Engineering Office Manger, perform general repair and maintenance of any and all ...


  • Washington Headquarters Services Washington, United States

    Summary · This position is located in Washington Headquarters Services (WHS), Facilities Services Directorate (FSD), Integrated Technology Division (ITD). The ITD works to ensure operations and business systems are connected and integrated. Duties · This is a Direct Hire Publ ...

  • Department of the Army

    General Engineer

    4 weeks ago


    Department of the Army Arlington, VA, United States

    DutiesResponsible for the development and implementation of UP Program policy and guidance for utility systems to include thermal systems such as electrical, water, wastewater and gas.Responsible for advising, evaluating and analyzing utility engineering projects, problems and ch ...

  • HQ USAF and Support Elements

    General Engineer

    2 weeks ago


    HQ USAF and Support Elements Arlington, United States

    Summary Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to serve as the focal point for the Installation Support Panel (ISP) and assist the Chief of the Installati ...


  • Gecko Hospitality Washington, United States

    Calling all Maintenance Techs/Engineer · Local restaurant in the DC area is seeking to hire a full-time maintenance technician. If you have experience maintaining buildings and doing general contracting in a business setting. We want to speak to you. · $25- $28 per hour · Full t ...


  • Office of the Secretary Washington, United States

    Summary · This position is located at the Office of Construction and Facilities Management, Office of Facilities Planning in Washington, DC. This position is for the Director of Cost Estimating Service (CES). Duties · The incumbent serves as a first- and second-line superviso ...

  • Exelon Corporation

    General Engineer

    3 weeks ago


    Exelon Corporation Washington, United States

    Job Description · Description · We're powering a cleaner, brighter future. · Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and co ...


  • Department of The Navy Washington DC, United States

    DutiesYou will serve as the program office lead for submarine escape and survivability.You will lead and provide material solutions for escape and survivability requirements, and changes to the requirements throughout the life cycle.You will ensure escape and survivability requir ...

  • USAJobs

    general engineer

    1 week ago


    USAJobs Washington D.C., United States Full time

    DutiesYou will serve as a consultant and expert advisor for the organization in applying advanced concepts, principles, and processes for life cycle engineering and management of various systems, subsystems, and equipment. · You will plan, manage, and coordinate various engineer ...

  • USAJobs

    General Engineer

    4 days ago


    USAJobs Washington D.C., United States Full time

    Duties · This organization leads cross-organizational efforts to keep critical sustainment programs on track, develop and deploy telecommunications services, and implement an innovative acquisition strategy for the FAA Enterprise Network Services (FENS) Program. Candidates select ...

  • USAJobs

    General Engineer

    4 days ago


    USAJobs Washington D.C., United States Full time

    Duties · This organization leads cross-organizational efforts to keep critical sustainment programs on track, develop and deploy telecommunications services, and implement an innovative acquisition strategy for the FAA Enterprise Network Services (FENS) Program. Candidates select ...

  • USAJobs

    General Engineer

    2 weeks ago


    USAJobs Washington D.C., United States Full time

    Duties · Plans, directs, coordinates and/or manages facility design and construction projects or project phases related to major organizational functions, programs, or initiatives. Overcomes and resolves technical, project management, and organizational problems using innovative ...

  • USAJobs

    general engineer

    4 weeks ago


    USAJobs Washington D.C., United States Full time

    DutiesYou will apply professional engineering knowledge and analysis of engineering problems in systems engineering and integration support. · You will administer the Launcher Branch system engineering management process, coordinates preparation of presentation material, and rep ...


  • Department of Defense Washington, United States

    Duties DIA employs a variety of professionals who serve throughout the workforce to ensure successful operations. To view this position's duties, click Vacancies to be directed to DIA's online application system. Please make note of the position title and 6-digit Job Opening ID n ...