- Cut/strip wires, crimp terminals, solder, and connect wires between individual component leads and other components, connectors, terminals, and contact points.
- Use various hand tools such as strippers, cutters, crimpers, and soldering irons, wire routing boards, mark and strip machines, pliers, etc.
- Assemble and attach hardware such as caps, clamps, knobs, and switches to assemblies.
- Inspect and buy off own work using Piper inspection certifications.
- Maintain the departments compliance with Piper QAM/QIM and FAA requirements.
- Rework discrepancies as necessary.
- Participate in continuous improvement efforts to improve the teams performance including schedule delivery, reduction of late work, elimination of quality defects & scrap, increasing productivity and generating cost reductions.
- Partner with senior teammates within career path to receive and share practical knowledge for proper training to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity.
- Adhere and maintain all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs.
- Perform duties as assigned by supervisor.
- Build electrical assemblies per serialized aircraft requirements using bus bars, circuit breakers, jumper wires, and related hardware.
- Inspect and buy off other teammates work using Piper inspection certifications.
- Conduct training and cross training of teammates to attain acceptable levels of performance.
- Support continuous improvement efforts to improve the teams performance including schedule delivery, reduction of late work, elimination of quality defects & scrap, increasing productivity and generating cost reductions.
- Ability to and willingness to receive and share practical knowledge, train , and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity.
- Adhere, maintain and assist teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs.
- Perform duties of lower graded position within Career Path and other duties as assigned by supervision.
- Install assembled components such as circuit breaker panels, switches, integrated circuits, harness assemblies, light assemblies, diodes, resistors to build aircraft main instrument panel harness assembly per serialized requirements.
- Build complex electrical assemblies and subassemblies with minimal quality defects at a high productivity rate.
- Interact with teammates & Pipers Manufacturing Support Teams as well as vendors, equipment suppliers, etc. when appropriate.
- Rework major discrepancies as necessary. Performs Material Review Board and Standard repairs when needed
- Provide assistance when required during new product development, design, build and testing.
- Assist with root cause and corrective action of nonconforming material in order to reduce defects and scrap material.
- Interface within the department to resolve quality concerns in a timely and cost-effective manner
- Help improve departmental performance by completing cost savings activities such as tooling improvements, eliminating waste, etc.
- Ability to and willingness to receive and share practical knowledge, train, cross-train and mentor Serves as lead with the ability to guide and willingness to receive and share practical knowledge, train, cross-train and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity.
- Adhere, maintain, assist and train teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs.
- Perform audits of areas within the department as required to maintain compliance with all FAA and Piper operational requirements. Initiate related operational process or procedural corrective action , or request additional assistance from leadership or other support teams where necessary.
- Perform duties of lower graded position within Career Path and other duties as assigned by supervision.
- Build standard avionics or electrical harness assemblies
- Develop cut sheets to support production requirements.
- Inspect and buy off own work using Piper inspection certifications.
- Maintain the departments compliance with Piper QAM/QIM and FAA requirements.
- Rework discrepancies as necessary.
- Participate in continuous improvement efforts to improve the teams performance including schedule delivery, reduction of late work, elimination of quality defects & scrap, increasing productivity and generating cost reductions.
- Partner with senior teammates within career path to receive and share practical knowledge for proper training to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity.
- Adhere and maintain all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs.
- Perform duties as assigned by supervision.
- Perform assembly of complex service parts
- May be required to plan and construct complex electrical/ electronic harness build-up boards.
- Inspect and buy off other teammates work using Piper inspection certifications.
- Conduct training and cross training of teammates to attain acceptable levels of performance.
- Support continuous improvement efforts to improve the teams performance including schedule delivery, reduction of late work, elimination of quality defects & scrap, increasing productivity and generating cost reductions.
- Ability to and willingness to receive and share practical knowledge, train , and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity.
- Adhere, maintain and assist teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs.
- Perform duties of lower graded position within Career Path and other duties as assigned by supervision.
- Interpret new electrical harness and assembly drawings, determine proper assembly requirements, and coordinate harness board design and sub-assembly requirements
- Complete assembly of instrument panels and loading of software
- Coordinate with Engineering, Avionics/Electrical, and Manufacturing on the design function and system operation.
- Interact with teammates & Pipers Manufacturing Support Teams as well as vendors, equipment suppliers, etc. when appropriate.
- Rework major discrepancies as necessary. Performs Material Review Board and Standard repairs when needed
- Provide assistance when required during new product development, design, build and testing.
- Assist with root cause and corrective action of nonconforming material in order to reduce defects and scrap material.
- Interface within the department to resolve quality concerns in a timely and cost-effective manner
- Help improve departmental performance by completing cost savings activities such as tooling improvements, eliminating waste, etc.
- Serves as lead with the ability to guide and willingness to receive and share practical knowledge, train, cross-train and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity.
- Adhere, maintain, assist and train teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs.
- Perform audits of areas within the department as required to maintain compliance with all FAA and Piper operational requirements. Initiate related operational process or procedural corrective action , or request additional assistance from leadership or other support teams where necessary.
- Perform duties of lower graded position within Career Path and other duties as assigned by supervision.
-
Mechanical Assembly Technician
1 week ago
Crimson Solutions South Gifford, United StatesTractel is a leading global safety specialist that offers reliable, innovative, and cost-effective solutions and services for working at heights. These solutions are used in many end-user applications, particularly in industrial, construction, energy, telecommunications, and infr ...
-
Avionics Electrical Assembler/Technician
5 days ago
Piper Aircraft, Inc. Vero Beach, United StatesJob Description · Job DescriptionAvionics Electrical Assembler/Technician compensation range (based on experience level) $18- $30/hr · Avionics Electrical Assembler I($18/hr-$20/hr) · Cut/strip wires, crimp terminals, solder, and connect wires between individual component leads a ...
-
Assembly Technician
13 hours ago
Cynet Systems Palm Bay, United StatesJob Description · Job DescriptionWe are looking for Assembly Technician for our client in Palm Bay, FL · Job Title: Assembly Technician · Job Location: Palm Bay, FL · Job Type: Contract · Job Description: · Responsible for performing a wide variety of electronic or electro-mechan ...
-
Instrument and Electrical Technician
1 week ago
Allied Universal Corporation Fort Pierce, United StatesJob Description · Job DescriptionWe are seeking an Instrument and Electrical Technician to join our team You will maintain and troubleshoot instrumentation, electrical equipment, PLC's and DCS control system in a continuously operated chemical plant. We will train the right candi ...
-
Nexus Innovations River Ridge, United StatesTo strengthen our existing team, SPIE SAG GmbH, a specialist in energy infrastructure in the CityNetworks & Grids division, is looking for you as an Electrician / Electronics Technician for Medium and Low Voltage (m/f/d) at River Ridge. · We offer: · Permanent employment in a cri ...
-
Avionics Electrical Technician Sr
1 week ago
General Dynamics Palm Bay, United StatesResponsibilities for this Position · Position Title: Avionics Electrical Technician Sr · Date: May 7, 2024 · Location: West Palm, FL, US · Company: Gulfstream Aerospace Corporation · Avionics Electrical Technician Sr in GAC Palm Beach · Unique Skills: · Gulfstream avionics instal ...
-
FusionTech West Vero Corridor, United StatesSince 1970, the name WEBER has stood for innovative solutions in cutting-edge technology. We realize customer requests with over 250 highly qualified employees, from planning and construction of products, assemblies, and special machines to electronics development and testing, as ...
-
Technical writer
1 week ago
BlueWave Ventures West Vero Corridor, United StatesTECHNICAL WRITER (M/F/D) IN THE FIELD OF DOCUMENTATION FOR OUR LOCATION IN WEST VERO CORRIDOR · NETZSCH Fine Particle Technology GmbH is the world's leading manufacturer of grinding and dispersing technologies. Our product portfolio includes a comprehensive laboratory program, pr ...
-
Electronics technician
1 week ago
Cascade Innovations Wabasso Beach, United StatesWe are looking for motivated employees for over 500 different professions. And that throughout Germany. Whether experienced professionals or career starters - we offer numerous entry and further training opportunities. · We are currently looking for you as an electrician for low ...
-
SPS programmer
2 weeks ago
Redwood Ventures St. Lucie Village, FL, United States FreelanceAkkodis - formed through the merger of AKKA & Modis - is a global leader in the field of Engineering & IT. As a global partner in a constantly changing technology & competitive environment, we support our clients with our 360° offering to create a more sustainable & smarter futur ...
-
Dispatcher
3 days ago
RACK Electric Fort Pierce, United StatesRack Electric is seeking an energetic, hardworking, organized, efficient, well-spoken individual who enjoys helping customers and co-workers alike. · We value the ability to maintain an organized daily schedule, is responsive to our team needs and enables us to timely resolve cus ...
-
Roll Your Own Machine Technician
5 days ago
Smokes 4 Less Palm Bay, United StatesJob Summary: · We are seeking an Full Time RYO Machine Technician/Operator to join our team in Palm Bay, Fl. · As a Machine Technician, you will be responsible for maintaining and repairing machinery and equipment used in the roll your own tobacco (RYO) process. Mechanical knowle ...
-
Sr. Avionics/Electrical Engineer
1 day ago
Piper Aircraft Vero Beach, United StatesPosition Summary: · The Senior Engineer is responsible for the integration of electrical and avionics systems in current and proposed new aircraft designs. Review & provide guidance on electrical drawings such as wiring diagrams, harness assemblies, schematics, and installation ...
-
Central Sterile Tech
2 days ago
HCA Florida St. Lucie Hospital Port Saint Lucie, United States**Introduction**: · **Benefits**: · HCA Florida St. Lucie Hospital, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: · - Comprehensive medical coverage that covers many common service ...
-
Aquaculture Technician- Fish Hatchery
1 day ago
Live Advantage Bait LLC Fort Pierce, United States**Live Advantage Bait LLC (LAB)** is a warmwater marine fish hatchery for baitfish and foodfish and a grow-out facility for multiple species of baitfish in our RAS facility. We also have a strong commitment to science, our community, and the ecosystem. · We are seeking a **full-t ...
-
Solar Roof Lead
3 days ago
Green House Solar and Air Palm Bay, United States**In business since 2016, GH Solar offers energy-saving solutions to clients through-out the United States. We're one of the leading providers of solar PV energy and back-up power systems. GH Solar offers top-quality solar panels, energy efficiency upgrades, roofing, electrical u ...
-
Avionics/Electrical Engineer
1 week ago
Piper Aircraft Vero Beach, United StatesJob Description Avionics/Electrical Engineer - Lead (Full Time)Department: All Openings, EngineeringPosition Summary: The Lead Avionics/Electrical Engineer is responsible for providing guidance and direction to the Avionics/Electrical Engineering team. This include the design and ...
-
Sr. Avionics/Electrical Engineer
1 week ago
Piper Aircraft Vero Beach, United StatesJob Description Sr. Avionics/Electrical Engineer (Full Time)Department: All Openings, EngineeringPosition Summary: The Senior Engineer is responsible for the integration of electrical and avionics systems in current and proposed new aircraft designs. Review & provide guidance on ...
-
Sr PGD Maintenance Specialist
1 week ago
NextEra Energy, Inc Vero Beach, United StatesRequisition ID: 79543 · Florida Power & Light Company is America's largest electric company, providing clean, affordable, and reliable electricity to more than 12 million people in Florida. We operate one of the cleanest power generation fleets in the U.S. and our reliability is ...
-
Avionics/Electrical Engineer
1 day ago
Piper Aircraft Vero Beach, United StatesJob Description · Avionics/Electrical Engineer - Lead (Full Time) · Department: All Openings, Engineering · Position Summary: · The Lead Avionics/Electrical Engineer is responsible for providing guidance and direction to the Avionics/Electrical Engineering team. This include t ...
Avionics Electrical Assembler/Technician - Vero Beach, United States - Piper Aircraft
Description
Job Description
Avionics Electrical Assembler/Technician (Full Time)
Department: All Openings, Manufacturing - Experienced
Avionics Electrical Assembler/Technician compensation range (based on experience level) $18- $30/hr
Avionics Electrical Assembler I($18/hr-$20/hr)
High school diploma or equivalent
Related avionics electrical experience requirements:
o Avionics Electrical Assembler I: 2 years of experience
o Avionics Electrical Assembler II: 2 5 years of experience
o Senior Avionics Electrical Assembler: 5 years of experience
o Avionics Electrical Technician I: 2 years of experience
o Avionics Electrical Technician II: 2 5 years of experience
o Senior Avionics Electrical Technician: 5 years of experience
Ability to work scheduled shift and hours, including overtime
Ability to work with minimal supervision
Use of hand and power tools as required
Follow all safety procedures
Ability to demonstrate sound judgement and effective communication skills (written and verbal).
Adhere to Piper Drawings, Process Specifications (PPS) and other manufacturing instructions
Piper Benefits Overview
Core Health Benefits:
Medical
Dental
Vision
Piper Provided Benefits (Basic):
Basic Life
Accidental Death & Dismemberment
Short-Term Disability (STD)
Long-Term Disability (LTD)
Employee Assistance Program (EAP)
Tuition Reimbursement
16 days of PTO (Paid Time Off)
11 company holidays
Voluntary Benefits:
Flexible Spending Accounts (FSA & DCA)
Supplemental Life Insurance
Long-Term Disability (LTD Buy- Up)
Accident Plan
Critical Illness
Universal Life (Whole Life Policy)
Hospital StayPay
Preferred Legal Plan
If you would like to set profiles, manage, and track your submissions you can register here