- You will analyze electrical engineering work performed to determine the factors impact system performance or design specifications.
- You will conduct cost-benefit analyses to ensure acquisitions are cost-effective.
- You will direct the allocation of resources to accomplish program missions and organizational goals.
- You will conduct engineering studies of electrical equipment and services throughout the installation to determine capabilities and service effectiveness towards making operational improvement proposals.
- You will develop long-range plans to assure adequate capacities and reliability of electrical utilities.
- You will develop scopes of work for system preventative maintenance and construction estimates
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check
- Males born after must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty
- You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites
- You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
- You will be required to obtain and maintain a current Certified Energy Manager (CEM) certification within 6 months of assuming the position.
- This is a Mission Essential position
- You will be required to obtain and maintain a current valid United States driver's license.
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA)
-
SHIPFITTER with Security Clearance
4 weeks ago
Department of Defense Kings Bay Base, GA, United StatesDuties · • You will serve as a SHIPFITTER in the SHIPFITTER SHOP (11A), HULL DIVISION, REPAIR DEPARTMENT (TRF-300), TRIDENT REFIT FACILITY, KINGS BAY, GA. · • You will perform rip-out, altercation, repair, and installation of submarine superstructures; emergency repairs, to weake ...
-
WELDER with Security Clearance
3 weeks ago
Department of Defense Kings Bay Base, GA, United StatesDuties · • You will WLEDER in the WELDING SHOP (26A), HULL DIVISION (TRF 310), REPAIR DEPARTMENT (TRF 400), TRIDENT REFIT FACILITY, KINGS BAY, GA. · • You will perform a wide range of shop and shipboard welding and related cutting, fitting, etc · operations associated with the fa ...
-
WELDER with Security Clearance
3 weeks ago
Department of the Navy Kings Bay, United StatesSummary This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may no ...
-
MATERIALS HANDLER with Security Clearance
3 weeks ago
Department of the Navy Kings Bay, United StatesSummary This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may no ...
-
TRAINING INSTRUCTOR with Security Clearance
4 weeks ago
Department of the Navy Kings Bay, United StatesSummary The selectee for this position will serve as a Training Instructor in the Hull Division, Repair Department of TRIREFFAC KINGS BAY. Duties * You will initiate, develop and present requested courses to personnel both military and civilian. * You will prepare lesson plans, s ...
-
TRAINING INSTRUCTOR with Security Clearance
4 weeks ago
Department of Defense Kings Bay, United StatesDuties * You will initiate, develop and present requested courses to personnel both military and civilian. * You will prepare lesson plans, student handouts, quizzes, and other training materials based upon course objectives. * You will be responsible for the improvement and modi ...
-
MECHANICAL ENGINEER with Security Clearance
4 weeks ago
Department of Defense Kings Bay Base, GA, United StatesDuties · • You will apply a broad knowledge of engineering programs in relation to facilities engineering, public works management, and construction commissioning. · • You will utilize computer software such as AutoCAD, MAXIMO, Specs Intact, Cost Works, and others as required. · ...
-
Department of the Navy Kings Bay, United StatesSummary You will serve as a MAINTENANCE MECHANIC LEADER in the TEMPORARY SERVICES SHOP (25D), MISCELLANEOUS SERVICES BRANCH (TRF 342), WATERFRONT SERVIVCES DIVISION (TRF-340), REPAIR DEPARTMENT (TRF-300) of TRIREFFAC KINGS BAY. Duties * You will provide and lead the efforts of ot ...
-
SHEET METAL MECHANIC with Security Clearance
3 weeks ago
Department of the Navy Kings Bay, United StatesSummary This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may no ...
-
Department of the Navy Kings Bay, United StatesSummary You will serve as a General Supply Specialist in the Control Division (TRF-510), Quality Assurance Branch (TRF-512), Supply Department (TRF-500) of TRIREFFAC KINGS BAY. Duties * You will contact and coordinate with individuals from Defense Logistics Agency (DLA), Naval Su ...
-
Department of Defense Kings Bay, United StatesDuties * You will contact and coordinate with individuals from Defense Logistics Agency (DLA), Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS), and various supply and support activities to ensure proper maintenance of stock levels. * You will respond to distribut ...
-
SHEET METAL MECHANIC with Security Clearance
3 weeks ago
Department of Defense Kings Bay Base, GA, United StatesDuties · • You will serve as a SHEET METAL MECHANIC in the SHEET METAL SHOP (17A), HULL DIVISION (TRF-310), REPAIR DEPARTMENT (TRF-300), TRIDENT REFIT FACILITY (TRIREFFAC) in KINGS BAY, GA. · • You will develop patterns, make templates, and lay out sheet metal items and systems. ...
-
Department of the Navy Kings Bay Base, GA, United StatesSummary You will serve as a REGION INSPECTOR/INVESTIGATOR in the Regional Office of Inspector General of COMNAVREG SE JAX · Duties · • You will evaluate cases relating to violations of laws, rules or regulations to check compliance with regulatory standards. · • You will lead inv ...
-
Lockheed Martin kings bay base, United StatesJob Number 664180BR Description:The coolest jobs on this planet... or any other... are with Lockheed Martin Space. At the dawn of a new space age, Lockheed Martin is a pioneer, partner, innovator and builder. Our amazing people are on a mission to make a difference in the world a ...
-
Department of Defense Kings Bay, United StatesDuties * You will be responsible for monitoring interfaces between multiple software applications to ensure accurate reporting to higher authority. * You will be responsible for researching and analyzing data to determine if maintenance has been completed on a system or equipment ...
-
Department of the Navy Kings Bay, United StatesSummary You will serve as a MAINTENANCE DATA MANAGEMENT TECHNICIAN in the MAINTENANCE MANAGEMENT DIVISION (TRF-430), PLANNING DEPARTMENT (TRF-400) of TRIREFFAC KINGS BAY. Duties * You will be responsible for monitoring interfaces between multiple software applications to ensure a ...
-
General Dynamics Information Technology Fort Stewart, United StatesREQ#: RQ172401 Requisition Type: Regular Your Impact Own your opportunity to work with the largest government agency in the nation. Make an impact by advancing the Department of Defense's mission to keep our country safe and secure. Job Description XVIII ABC Hub and Spoke MTCs pr ...
-
VisionIT Fort Stewart, United StatesVision IT is a woman-owned business that has supported the DoD and Federal Sector IT initiatives for two decades. We work side-by-side with our clients as a trusted, long-term partner offering innovative consultation and leadership to solve their most pressing and complex problem ...
-
Site Manager SME with Security Clearance
1 week ago
VisionIT Fort Stewart, United StatesVision IT is a woman-owned business that has supported the DoD and Federal Sector IT initiatives for two decades. We work side-by-side with our clients as a trusted, long-term partner offering innovative consultation and leadership to solve their most pressing and complex problem ...
-
Vision IT Fort Stewart, United StatesVision IT is a woman-owned business that has supported the DoD and Federal Sector IT initiatives for two decades. We work side-by-side with our clients as a trusted, long-term partner offering innovative consultation and leadership to solve their most pressing and complex problem ...
ELECTRICAL ENGINEER with Security Clearance - Kings Bay Base, GA, United States - Department of Defense
Description
DutiesTo learn more about E-Verify, including your rights and responsibilities, visit e-• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.
Qualifications In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector
Specialized experience must demonstrate the following: 1) Modifying standard practices and adapting equipment or techniques to solve a variety of problems of electrical utilities; 2) Applying standard practices of related engineering disciplines to utilities engineering design; 3) Planning, budgeting, and monitoring large scale utility construction projects to ensure compliance with objectives, standards, and requirements; 4) Reading and interpreting plans, specifications, and engineering drawings to prepare reports utilizing software (i.
eMicrosoft Excel, Word, Outlook, and PowerPoint); and 5) Providing technical background training in electric utilities/power concepts to include utility monitoring systems; such as DCADA or utility controls
NOTE:
This information must be fully supported in your resume
Additional qualification information can be found from the following Office of Personnel Management website: and Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)
Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment
Education Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM)
Qualifications Standards Manual:
Successful completion of a professional engineering degree
To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics
Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position
OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico
Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g.
, State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U
S
Office of Personnel Management
For more information, please visit:
OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)
The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g.
, engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g.
, in interdisciplinary positionsAdditional information This position is covered by the Department of Defense Priority Placement Program
Several vacancies may be filled
This announcement uses the Defense Industrial Base, Major Range and Test Facilities direct hire authority to recruit and appoint qualified candidates to certain positions in the competitive service
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee
A relocation incentive may be authorized
Continued employment in this position is dependent upon favorable adjudication of applicable background investigation
This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements
Overtime or night differential pay and/or unusual duty hours may be required
Work is in an office environment; sustained posture in a seated position for prolonged periods of time
Requires some manual labor work that involves walking or standing some of the time, exerting up to 50 pounds of force on a recurring basis, and operation of vehicles
Work may include fieldwork as required at various job sites as well as job duties in an office, substation, manholes and vaults, and outside environment exposed to the elements and traffic
The job risks exposure to extreme noise levels, dusts, pollen, bright, dim light, extreme cold and or heat, wet or humid conditions, fumes, noxious odors, chemicals, sewage, confined spaces and heights
Requires normal vision, hearing, speaking, color perception, sense of smell, depth perception, and texture perception
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments
Federal annuitant information:
The selection of an a
