Metrology Technician I - Seal Beach, United States - V2X

Description

Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.

What You'll Do:

• This position assists in the performance of calibration of electronic and physical/dimensional measuring and test equipment to technical specifications, maintaining traceability to the National Institute of Standards and Technology (NIST). Metrology Technician 1 independently determines and performs operations to calibrate and certify electronic and physical/dimensional measuring and test equipment. They utilize calibration methods and techniques to analyze equipment problems and meet accuracy and precision requirements. They identify error sources and diagnose and repair malfunctions in complex measuring and test equipment using theories of operation, block diagrams, schematics, logic trees, and software diagnostics.

Key Responsibilities:

• MET TECH I performs one or a combination of typical duties, such as:
• Conducting repairs to the component level and replacement of electronic components and/or parts. Troubleshooting, operating, installing, repairing, testing, and calibrating electronic, mechanical and/or specialized test equipment.
• Troubleshooting electronic and mechanical equipment to the component level, as well as demonstrating the ability to repair complex electronic and electromechanical assemblies to the component level.
• Operating oscilloscopes, power meters, spectrum analyzers, Test, Measurement, and Diagnostic Equipment (TMDE) and General-Purpose Electronic Test Equipment (GPETE).
• Performing repairs of TMDE such as Frequency Counters, Oscilloscopes, Microwave Equipment, Multimeters, Generators and Specialized Avionics Test Equipment, such as TACAN Test Set (T/S), Radar T/S, Transponder T/S, Weapons T/S as well as Automated Test Equipment (ATE) systems.
• Using commercial and Navy documentation schematics, wiring diagrams, Instrument Calibration Procedures (ICPs) and technical service manuals (NAVAIR drawing and publications) to troubleshoot test equipment to board and component level.
• Providing required technical support to programs including, but not limited to, technical support services, logistics, information technology, software, test and evaluation.
• Knowledge of technical engineering concepts, principles, and practices necessary to perform the full range of projects concerned with producing, overhauling, refurbishing, or redesigning systems such as GPETE and ATE systems or other combat or combat support systems.
• Use tools such as screwdrivers manual and battery operated, soldering equipment soldering irons, solder extractors, drills, pliers, wrenches, etc.

Minimum Qualifications

• Education:
  • High School diploma (or equivalent) and 2 years of industry trade school or civilian college in electronics is required. Completion of an appropriate military "A" school and completion of at least one appropriate military "B" or "C" school may be substituted for the two-year requirement.
• Experience:
  • A minimum of 3 years of current, relevant experience in Calibration.
  • Knowledge of function and troubleshooting of Naval Aviation Support Equipment such as AN/ARM-156 Radio Test Set, AN/UPM-155 Indicator Test Set, AN/AMW-96 Weapons Test Set, 1383AS200-1 Propeller Synchronizer Test Set, AN/ALM-283 Countermeasures Test Set, AN/ASM-663 TACAN Test Set, and AN/APM-403 Radar Altimeter Test Set is highly preferred.
• Other Requirements:
  • An active DoD Secret clearance
  • U.S. Citizenship status is required as this position will require the ability to access US only data system
  • Ability to visually inspect, count, segregate, and store incoming calibration standards and equipment.
  • Must be able to lift at least 50 lbs., unaided. Employee must be able to move equipment from incoming carts to workstations.
  • Able to stand for a period of time when working on equipment.

Desired Qualifications

• Experience:
  • Experience with USN Surface or Subsurface systems (desired)....
  • Experience with ISO9001:2008 or equivalent, Quality Management Systems (preferred)
  • Knowledge of Navy software such as MCMS, METPRO, FEDLOG, NATEC is highly preferred.

Skills & Technology Used

• Analytical Thinking & Problem Solving:
  • Possesses both analytical and interpersonal skills.
  • Good problem solving, negotiation and organizational skills/techniques.
• Business Partner/Effective Communicator:
  • English language skills to communicate and negotiate with government personnel.
  • Strong communicator must be able to communicate clearly both in writing and orally.
  • Customer service oriented, detail focused, pro-active behavior, multi-task capability.
• Software:
  • Microsoft Office Suite
  • Excel
  • Outlook
  • SharePoint
  • Personal computer, printer, copy machine and other general office equipment.

What We Bring

• At V2X we strive to be market competitive in our total reward offerings.
• The salary provided is intended to display the value of the company's base pay compensation for locations in the state of California.
• The successful candidate's pay will be based on the current rate agreed in the applicable Wage Determination (WD) for this site.
• USD $68,265.60
• Please speak with a recruiter for additional information.
• Employee benefits include the following:
  • Healthcare coverage
  • Life insurance, AD&D, and disability benefits
  • Retirement plan
  • Wellness programs
  • Paid time off, including holidays
  • Learning and Development resources
  • Employee assistance resources

Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

We are committed to an inclusive and diverse workplace that values and supports the contributions of each individual. This commitment along with our common Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation and expand our success in the global marketplace. V2X is an Equal Opportunity /Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, protected veteran status or status as an individual with a disability. EOE/Minority/Female/Disabled/Veteran.

Minimum Qualifications

• Education:
  • High School diploma (or equivalent) and 2 years of industry trade school or civilian college in electronics is required. Completion of an appropriate military "A" school and completion of at least one appropriate military "B" or "C" school may be substituted for the two-year requirement.
• Experience:
  • A minimum of 3 years of current, relevant experience in Calibration.
  • Knowledge of function and troubleshooting of Naval Aviation Support Equipment such as AN/ARM-156 Radio Test Set, AN/UPM-155 Indicator Test Set, AN/AMW-96 Weapons Test Set, 1383AS200-1 Propeller Synchronizer Test Set, AN/ALM-283 Countermeasures Test Set, AN/ASM-663 TACAN Test Set, and AN/APM-403 Radar Altimeter Test Set is highly preferred.
• Other Requirements:
  • An active DoD Secret clearance
  • U.S. Citizenship status is required as this position will require the ability to access US only data system
  • Ability to visually inspect, count, segregate, and store incoming calibration standards and equipment.
  • Must be able to lift at least 50 lbs., unaided. Employee must be able to move equipment from incoming carts to workstations.
  • Able to stand for a period of time when working on equipment.

Desired Qualifications

• Experience:
  • Experience with USN Surface or Subsurface systems (desired)....
  • Experience with ISO9001:2008 or equivalent, Quality Management Systems (preferred)
  • Knowledge of Navy software such as MCMS, METPRO, FEDLOG, NATEC is highly preferred.

Skills & Technology Used

• Analytical Thinking & Problem Solving:
  • Possesses both analytical and interpersonal skills.
  • Good problem solving, negotiation and organizational skills/techniques.
• Business Partner/Effective Communicator:
  • English language skills to communicate and negotiate with government personnel.
  • Strong communicator must be able to communicate clearly both in writing and orally.
  • Customer service oriented, detail focused, pro-active behavior, multi-task capability.
• Software:
  • Microsoft Office Suite
  • Excel
  • Outlook
  • SharePoint
  • Personal computer, printer, copy machine and other general office equipment.

What We Bring

• At V2X we strive to be market competitive in our total reward offerings.
• The salary provided is intended to display the value of the company's base pay compensation for locations in the state of California.
• The successful candidate's pay will be based on the current rate agreed in the applicable Wage Determination (WD) for this site.
• USD $68,265.60
• Please speak with a recruiter for additional information.
• Employee benefits include the following:
  • Healthcare coverage
  • Life insurance, AD&D, and disability benefits
  • Retirement plan
  • Wellness programs
  • Paid time off, including holidays
  • Learning and Development resources
  • Employee assistance resources

Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

We are committed to an inclusive and diverse workplace that values and supports the contributions of each individual. This commitment along with our common Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation and expand our success in the global marketplace. V2X is an Equal Opportunity /Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, protected veteran status or status as an individual with a disability. EOE/Minority/Female/Disabled/Veteran.

What You'll Do:

• This position assists in the performance of calibration of electronic and physical/dimensional measuring and test equipment to technical specifications, maintaining traceability to the National Institute of Standards and Technology (NIST). Metrology Technician 1 independently determines and performs operations to calibrate and certify electronic and physical/dimensional measuring and test equipment. They utilize calibration methods and techniques to analyze equipment problems and meet accuracy and precision requirements. They identify error sources and diagnose and repair malfunctions in complex measuring and test equipment using theories of operation, block diagrams, schematics, logic trees, and software diagnostics.

Key Responsibilities:

• MET TECH I performs one or a combination of typical duties, such as:
• Conducting repairs to the component level and replacement of electronic components and/or parts. Troubleshooting, operating, installing, repairing, testing, and calibrating electronic, mechanical and/or specialized test equipment.
• Troubleshooting electronic and mechanical equipment to the component level, as well as demonstrating the ability to repair complex electronic and electromechanical assemblies to the component level.
• Operating oscilloscopes, power meters, spectrum analyzers, Test, Measurement, and Diagnostic Equipment (TMDE) and General-Purpose Electronic Test Equipment (GPETE).
• Performing repairs of TMDE such as Frequency Counters, Oscilloscopes, Microwave Equipment, Multimeters, Generators and Specialized Avionics Test Equipment, such as TACAN Test Set (T/S), Radar T/S, Transponder T/S, Weapons T/S as well as Automated Test Equipment (ATE) systems.
• Using commercial and Navy documentation schematics, wiring diagrams, Instrument Calibration Procedures (ICPs) and technical service manuals (NAVAIR drawing and publications) to troubleshoot test equipment to board and component level.
• Providing required technical support to programs including, but not limited to, technical support services, logistics, information technology, software, test and evaluation.
• Knowledge of technical engineering concepts, principles, and practices necessary to perform the full range of projects concerned with producing, overhauling, refurbishing, or redesigning systems such as GPETE and ATE systems or other combat or combat support systems.
• Use tools such as screwdrivers manual and battery operated, soldering equipment soldering irons, solder extractors, drills, pliers, wrenches, etc.