Jobs

    Controls Engineer - Kennedy Space Center, United States - The Employee Connect

    The Employee Connect
    The Employee Connect Kennedy Space Center, United States

    3 weeks ago

    Default job background
    Description


    About the job Controls Engineer Our Client has a Controls Engineer position open in Orlando, FL.This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance.


    RESPONSIBILITIES:


    Must be organized, technically competent, have effective oral and written communications, and experience in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters.

    Designs, develops, and implements DCS/PLC control system (logic software and hardware) to meet process requirements. As well as complying with any local or government agency design/implementation codes.

    Knowledge of control panel and system design standards and code practices for any local or government agenciesDevelops documents detailing control configuration and design.

    Documents include Theory/Description of operation, Detailed control system design description, system implementation/acceptance test plans.
    Able to interface with facility design to optimize panel location minimizing voltage drop and optimizing panel maintenance.

    Able to perform the following system design calculations/analysis:

    Short circuit protection, harmonics, noise reduction/cancellation, power consumption, load flow, short circuit protection, protective relay/circuit design, ground fault monitoring, safety system implementation (SIL rating)Knowledge of analyzing system design for Hazard analysis development and mitigationAbility to implement control system redundancy to minimize single points of failure.

    Develops schematics of control system configuration, wiring, network layout, and equipment panel layouts on AutoCADWill assist with the initial start-up and debugging of integrated systems and the development of system documentation.

    Individual will be working on automation and control system integration projects for clients in industries such as entertainment and manufacturing.

    Will act as technical lead on projects and guide lower-level engineers, technicians, and contractors.
    Will act as Project Manager on smaller projects ranging from $50k to $250k.

    This includes but is not limited to:
    Develops and executes implementation plans for the project.
    Assigns work to meet overall project deadlines.
    Ensures that all project team members clearly understand the scope of W-M responsibilities.
    Develops schedules for W-M and customer requirements.
    Evaluates progress on project(s) and details changes.

    Responsible for all purchasing and subcontractor requirementsResponsible for the development of costs and proposal of change orders to contract scope.


    QUALIFICATIONS:
    Education Bachelors Degree in Electrical Engineering.

    (Directly related experience may be substituted for degree)8-10 years in the following areas is preferred: Ethernet-based control systems, safety systems, instrumentation, components, logic programming, and DCS programming (i.e., DeltaV, Experion, 800xA.)Experience with instrumentation and controls/PLC system design (i.e., Allen Bradley, Modicon, Siemens) required.

    Experience with AutoCAD is also desired.
    Key Competencies Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions.

    Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem SolvingSkills All employees are required to be proficient in the use of Microsoft Windows and Office environments.


    TRAVEL:
    Ability to travel up to 35%

    PHYSICAL DEMANDS OF POSITION:
    Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling

    WORKING CONDITIONS:
    Standard office environment, On-site office environment, and diverse industrial environments. Frequent PC usage, fax machines, copy machines, and phones.
    Occasional night shifts will be required for this role as installs will be performed during off (closed) hours.
  • Vision Achievement

    Controls Engineer

    3 weeks ago

    Vision Achievement Kennedy Space Center, United States

    Job Description:Client: Engineering, Systems Integration, Fabrication, Entertainment Systems, ManufacturingThis position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check ...

  • Wunderlich-Malec

    Controls Engineer

    3 weeks ago

    Wunderlich-Malec Kennedy Space Center, United States

    Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is:100% employee-owned company with over 40 years of industry historyA T ...

  • The Employee Connect

    Controls Engineer

    2 weeks ago

    The Employee Connect Kennedy Space Center, United States

    About the job Controls Engineer · Our Client has a Controls Engineer position open in Orlando, FL. · This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out ...

  • Catapult Staffing

    Controls Engineer

    1 day ago

    Catapult Staffing Kennedy Space Center, United States

    We have a Controls Engineer position open in Orlando, FL. This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance. RESPONSIBI ...

  • PEAK Technical Staffing USA

    Controls Engineer

    3 weeks ago

    PEAK Technical Staffing USA Kennedy Space Center, United States

    We have a Controls Engineer position open in Orlando, FL. This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance.Major Respo ...

  • Lighting Staffing Agency

    Controls Engineer

    3 weeks ago

    Lighting Staffing Agency Kennedy Space Center, United States

    About the job Controls Engineer JOB DESCRIPTION:This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance.RESPONSIBILITIES:Must ...

  • Vision Achievement

    Controls Engineer

    6 days ago

    Vision Achievement Kennedy Space Center, United States

    Job Description: · Client: Engineering, Systems Integration, Fabrication, Entertainment Systems, Manufacturing · This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation ...

  • Blossom Hr

    Controls Engineer

    1 week ago

    Blossom Hr Kennedy Space Center, United States

    About the job Controls Engineer JOB DESCRIPTION:We have a Controls Engineer position open in Orlando, FL.This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-o ...

  • Vision Achievement

    Controls Engineer

    2 weeks ago

    Vision Achievement Kennedy Space Center, United States

    Job Description:Client: Engineering, Systems Integration, Fabrication, Entertainment Systems, ManufacturingThis position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check ...

  • Wunderlich-Malec

    Controls Engineer

    2 weeks ago

    Wunderlich-Malec Kennedy Space Center, United States

    Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is: · 100% employee-owned company with over 40 years of industry histor ...

  • Lighting Staffing Agency

    Controls Engineer

    2 weeks ago

    Lighting Staffing Agency Kennedy Space Center, United States

    About the job Controls Engineer · JOB DESCRIPTION: · This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance. · RESPONSIBI ...

  • Blossom Hr

    Controls Engineer

    6 days ago

    Blossom Hr Kennedy Space Center, United States

    About the job Controls Engineer · JOB DESCRIPTION: · We have a Controls Engineer position open in Orlando, FL. · This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentati ...

  • Vision Achievement

    Controls Engineer

    1 week ago

    Vision Achievement Kennedy Space Center, United States

    Job Description:Client: Engineering, Systems Integration, Fabrication, Entertainment Systems, ManufacturingThis position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check ...

  • Delectus , LLC

    Controls Engineer

    4 weeks ago

    Delectus , LLC Kennedy Space Center, United States

    Position Description · The role will involve design and implementation, technical mentoring, and project management of automation solutions with DCS, PLC, HMI, and SCADA platforms. This role is project focused with a concentration in the Theme Park/Entertainment industry. · The ...

  • Vision Achievement

    Controls Engineer

    2 weeks ago

    Vision Achievement Kennedy Space Center, United States

    Job Description: · Client: Engineering, Systems Integration, Fabrication, Entertainment Systems, Manufacturing · This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation ...

  • PEAK Technical Staffing USA

    Controls Engineer

    2 weeks ago

    PEAK Technical Staffing USA Kennedy Space Center, United States

    We have a Controls Engineer position open in Orlando, FL. This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance. · Major R ...

  • Kelly Services, Inc.

    Senior Controls Engineer

    2 weeks ago

    Kelly Services, Inc. Kennedy Space Center, United States

    #x 9; Collaborate closely with project managers, ride engineers, and various departments to comprehend project requirements, design criteria, and operational objectives. Develop comprehensive system specifications and engineering design documents, em Controls Engineer, Controls, ...

  • Universal Orlando

    Associate Controls Engineer

    3 weeks ago

    Universal Orlando Kennedy Space Center, United States

    Job Description & Requirements// FOR DATA ORGANIZATION // Below code block contains - Job Description & Apply/Refer & ShareJob Description & RequirementsUniversal Orlando Resort believes in-person collaboration is key to our success. Many of our Team Members work in a hybrid capa ...

  • Carrier Global Corporation

    Lead Controls Engineer

    3 weeks ago

    Carrier Global Corporation Kennedy Space Center, United States

    Design and program increasingly advanced building automation systems, site-specific configuration of control system, and control algorithms. Adhere to project requirements and company and customer standards of design, programming, andimplementation. Building, Controls Engineer, A ...

  • Universal Orlando

    Associate Controls Engineer

    2 weeks ago

    Universal Orlando Kennedy Space Center, United States

    Job Description & Requirements · // FOR DATA ORGANIZATION // · Below code block contains - Job Description & Apply/Refer & Share · Job Description & Requirements · Universal Orlando Resort believes in-person collaboration is key to our success. Many of our Team Members work in ...