Jobs

    Controls Engineer - Kennedy Space Center, United States - Vision Achievement

    Vision Achievement
    Vision Achievement Kennedy Space Center, United States

    5 days ago

    Default job background
    Description

    Job Description:

    Client: Engineering, Systems Integration, Fabrication, Entertainment Systems, ManufacturingThis position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance.

    Experience with major amusement or theme park rides is essential.


    RESPONSIBILITIES:


    Must be organized, technically competent, have effective oral and written communications, and experience in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters.

    Designs, develops, and implements DCS/PLC control system (logic software and hardware) to meet process requirements. As well as complying with any local or government agency design/implementation codes.

    Knowledge of control panel and system design standards and code practices for any local or government agenciesDevelops documents detailing control configuration and design.

    Documents include Theory/Description of operation, Detailed control system design description, system implementation/acceptance test plans.
    Able to interface with facility design to optimize panel location minimizing voltage drop and optimizing panel maintenance.

    Able to perform the following system design calculations/analysis:

    Short circuit protection, harmonics, noise reduction/cancellation, power consumption, load flow, short circuit protection, protective relay/circuit design, ground fault monitoring, safety system implementation (SIL rating)Knowledge of analyzing system design for Hazard analysis development and mitigationAbility to implement control system redundancy to minimize single points of failure.

    Develops schematics of control system configuration, wiring, network layout, and equipment panel layouts on AutoCADWill assist with the initial start-up and debugging of integrated systems and the development of system documentation.

    Individual will be working on automation and control system integration projects for clients in industries such as entertainment and manufacturing.

    Will act as technical lead on projects and guide lower-level engineers, technicians, and contractors.
    Will act as Project Manager on smaller projects ranging from $50k to $250k.

    This includes but is not limited to:
    Develops and executes implementation plans for the project.
    Assigns work to meet overall project deadlines.
    Ensures that all project team members clearly understand the scope of W-M responsibilities.
    Develops schedules for W-M and customer requirements.
    Evaluates progress on project(s) and details changes.

    Responsible for all purchasing and subcontractor requirementsResponsible for the development of costs and proposal of change orders to contract scope.


    QUALIFICATIONS:
    Education Bachelors Degree in Electrical Engineering.

    (Directly related experience may be substituted for degree)5+ years in the following areas is preferred: Ethernet-based control systems, safety systems, instrumentation, components, logic programming, and DCS programming (i.e., DeltaV, Experion, 800xA.)Experience with instrumentation and controls/PLC system design (i.e., Allen Bradley, Modicon, Siemens) required.

    Experience with AutoCAD is also desired.
    Key Competencies Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions.

    Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem SolvingSkills All employees are required to be proficient in the use of Microsoft Windows and Office environments.


    TRAVEL:
    Ability to travel up to 35%.
  • Wunderlich-Malec

    Controls Engineer

    5 days ago

    Wunderlich-Malec Kennedy Space Center, United States

    Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is:100% employee-owned company with over 40 years of industry historyA T ...

  • PEAK Technical Staffing USA

    Controls Engineer

    5 days ago

    PEAK Technical Staffing USA Kennedy Space Center, United States

    We have a Controls Engineer position open in Orlando, FL. This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance.Major Respo ...

  • Strivector

    Controls Engineer

    1 week ago

    Strivector Kennedy Space Center, United States

    THE EMPLOYER · Take your career up a few notches with this has been providing customers with engineering, system integration and fabrication solutions for more than 40 years. · THE JOB · This is Controls Engineer position and requires someone who has experience with instrument ...

  • Blossom Hr

    Controls Engineer

    3 weeks ago

    Blossom Hr Kennedy Space Center, United States

    About the job Controls Engineer JOB DESCRIPTION:We have a Controls Engineer position open in Orlando, FL.This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-o ...

  • Strivector

    Controls Engineer

    1 week ago

    Strivector Kennedy Space Center, United States

    THE EMPLOYERTake your career up a few notches with this has been providing customers with engineering, system integration and fabrication solutions for more than 40 years.THE JOBThis is Controls Engineer position and requires someone who has experience with instrumentation and co ...

  • Universal Orlando

    Supervisor, Engineering-Controls

    1 week ago

    Universal Orlando Kennedy Space Center, United States

    Job Description & Requirements · // FOR DATA ORGANIZATION // · Below code block contains - Job Description & Apply/Refer & Share · Job Description & Requirements · Universal Orlando Resort believes in-person collaboration is key to our success. Many of our Team Members work in ...

  • Jones Lange Lasalle, Inc.

    Control Systems Engineer

    18 hours ago

    Jones Lange Lasalle, Inc. Kennedy Space Center, United States

    JLL supports the Whole You, personally and professionally. Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology to our clients. We are committed to hiring the best, most Systems Engineer, Controls, A ...

  • a.i. solutions

    Guidance Navigation and Control Engineer

    3 weeks ago

    a.i. solutions KENNEDY SPACE CENTER, United States Full time

    Job Details · Description · Job Description · a.i. solutions is seeking a highly motivated Guidance, Navigation, and Control (GN&C) Engineer to join the ELVIS contract supporting the NASA Launch Service Program at the Kennedy Space Center. The GN&C Engineer will provide insigh ...

  • Blossom Hr

    Controls Engineer

    3 weeks ago

    Blossom Hr Kennedy Space Center, United States

    About the job Controls Engineer · JOB DESCRIPTION: · We have a Controls Engineer position open in Orlando, FL. · This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentati ...

  • Vision Achievement

    Controls Engineer

    3 weeks ago

    Vision Achievement Kennedy Space Center, United States

    Job Description: · Client: Engineering, Systems Integration, Fabrication, Entertainment Systems, Manufacturing · This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation ...

  • Catapult Staffing

    Controls Engineer

    2 weeks ago

    Catapult Staffing Kennedy Space Center, United States

    We have a Controls Engineer position open in Orlando, FL. This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance. RESPONSIBI ...

  • Universal Destinations & Experiences

    Supervisor, Engineering-Controls Universal Epic Universe

    1 week ago

    Universal Destinations & Experiences Kennedy Space Center, United States

    Universal Orlando Resort believes in-person collaboration is key to our success. Many of our Team Members work in a hybrid capacity, contributing from the workplace a minimum of three days per week. There are also roles that require being on-site ful Controls, Supervisor, Control ...

  • Gables Search Group

    Electrical Controls Design Engineer

    2 weeks ago

    Gables Search Group Kennedy Space Center, United States

    Candidate will need packaging equipment electrical design experience. AutoCAD 2D design, PLCs, HMIs, Rockwell Automation No entry level or sponsorship candidates please.What you'll be doing:The Electrical Controls/Design Engineer will design electrical machine controls for standa ...

  • Axient LLC

    Senior Engineer Spacecraft Environmental Control and Life Support Systems

    2 weeks ago

    Axient LLC Kennedy Space Center, United States

    Check out this NEW Opportunity with Axient: · Axient is seeking a Senior Engineer with expertise in Spacecraft Environmental Control and Life Support Systems (ECLSS) in support of the Gateway Deep Space Logistics (DSL) Program at NASA's Kennedy Space Center (KSC). This position ...

  • Amentum

    HVAC Controls Technician

    3 weeks ago

    Amentum Kennedy Space Center, United States

    JOB DESCRIPTION/POSITION RESPONSIBILITIES: · HVAC Controls Technicians install, repair, and maintain computer-based systems that control and monitor a building's mechanical and electrical equipment including heating, ventilation, and air conditioning (HVAC), and energy management ...

  • Jacobs

    Electrical Engineer

    3 weeks ago

    Jacobs KENNEDY SPACE CENTER, United States Full time-Regular

    Electrical Engineer - Guidance, Navigation & Controls-(ADV0007E9) Your Impact: Jacobs Technology provides overall management and implementation of ground systems capabilities, flight hardware processing and launch operations at NASA's Kennedy Space Center in Florida. These task ...

  • Amentum

    Quality Engineer IV

    3 days ago

    Amentum KENNEDY SPACE CENTER, United States Full time

    Purpose and Scope: · The Quality Engineer plans and directs activities concerned with the development, application, and maintenance of quality standards for processing materials into partially finished or finished material or product. Quality assurance and quality control are im ...

  • Oceaneering

    Commissioning Technician

    2 weeks ago

    Oceaneering Kennedy Space Center, United States Full time

    Company Profile · Oceaneering Mobile Robotics (OMR) designs, manufactures, implements, and maintains innovative turnkey logistics solutions based on autonomous mobile robot technology. With over 1,700 mobile robotics deployed worldwide and with over 30 million miles accumulated, ...

  • ASRC Federal

    Orbital Arc Welder Spacecraft Technician

    1 week ago

    ASRC Federal KENNEDY SPACE CENTER, United States Full time

    Job Description · ASRC Federal System Solutions (ASFF) brings a 14-year history of delivering high-performance space systems engineering, integration and satellite operations services to civil and defense agencies. · ASFF provides these services throughout all phases of the prog ...

  • Amentum

    Manager, Project Engineering

    3 weeks ago

    Amentum KENNEDY SPACE CENTER, United States Full time

    Company Conformance Statement · In the performance of their respective tasks and duties all employees are required to conform to the following: · Perform quality work within deadlines with or without direct supervision. · Interact professionally with other employees, customers, ...