- Must be organized, technically competent, have effective oral and written communications, and experience in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters.
- Designs, develops, and implements DCS/PLC control system (logic software and hardware) to meet process requirements. As well as complying with any local or government agency design/implementation codes.
- Knowledge of control panel and system design standards and code practices for any local or government agencies
- Develops documents detailing control configuration and design. Documents include Theory/Description of operation, Detailed control system design description, system implementation/acceptance test plans.
- Able to interface with facility design to optimize panel location minimizing voltage drop and optimizing panel maintenance.
- Able to perform the following system design calculations/analysis: Short circuit protection, harmonics, noise reduction/cancellation, power consumption, load flow, short circuit protection, protective relay/circuit design, ground fault monitoring, safety system implementation (SIL rating)
- Knowledge of analyzing system design for Hazard analysis development and mitigation
- Ability to implement control system redundancy to minimize single points of failure.
- Develops schematics of control system configuration, wiring, network layout, and equipment panel layouts on AutoCAD
- Will assist with the initial start-up and debugging of integrated systems and the development of system documentation.
- Individual will be working on automation and control system integration projects for clients in industries such as entertainment and manufacturing.
- Will act as technical lead on projects and guide lower-level engineers, technicians, and contractors.
- Will act as Project Manager on smaller projects ranging from $50k to $250k. This includes but is not limited to:
- Develops and executes implementation plans for the project.
- Assigns work to meet overall project deadlines.
- Ensures that all project team members clearly understand the scope of W-M responsibilities.
- Develops schedules for W-M and customer requirements.
- Evaluates progress on project(s) and details changes.
- Responsible for all purchasing and subcontractor requirements
- Responsible for the development of costs and proposal of change orders to contract scope.
- Education Bachelors Degree in Electrical Engineering. (Directly related experience may be substituted for degree)
- 5+ years in the following areas is preferred: Ethernet-based control systems, safety systems, instrumentation, components, logic programming, and DCS programming (i.e., DeltaV, Experion, 800xA.)
- Experience with instrumentation and controls/PLC system design (i.e., Allen Bradley, Modicon, Siemens) required.
- Experience with AutoCAD is also desired.
- Key Competencies Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving
- Skills All employees are required to be proficient in the use of Microsoft Windows and Office environments.
- TRAVEL: Ability to travel up to 35%.
-
Controls Engineer
9 hours ago
Strivector Kennedy Space Center, United StatesTHE EMPLOYERTake your career up a few notches with this has been providing customers with engineering, system integration and fabrication solutions for more than 40 years.THE JOBThis is Controls Engineer position and requires someone who has experience with instrumentation and co ...
-
Controls Engineer
2 weeks ago
Blossom Hr Kennedy Space Center, United StatesAbout the job Controls Engineer JOB DESCRIPTION:We have a Controls Engineer position open in Orlando, FL.This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-o ...
-
Controls Engineer
3 weeks ago
Lighting Staffing Agency Kennedy Space Center, United StatesAbout the job Controls Engineer · JOB DESCRIPTION: · This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance. · RESPONSIBI ...
-
Supervisor, Engineering-Controls
20 hours ago
Universal Orlando Kennedy Space Center, United StatesJob Description & Requirements · // FOR DATA ORGANIZATION // · Below code block contains - Job Description & Apply/Refer & Share · Job Description & Requirements · Universal Orlando Resort believes in-person collaboration is key to our success. Many of our Team Members work in ...
-
Guidance Navigation and Control Engineer
2 weeks ago
a.i. solutions KENNEDY SPACE CENTER, United States Full timeJob Details · Description · Job Description · a.i. solutions is seeking a highly motivated Guidance, Navigation, and Control (GN&C) Engineer to join the ELVIS contract supporting the NASA Launch Service Program at the Kennedy Space Center. The GN&C Engineer will provide insigh ...
-
Controls Engineer
3 weeks ago
Wunderlich-Malec Kennedy Space Center, United StatesWunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is: · 100% employee-owned company with over 40 years of industry histor ...
-
Controls Engineer
2 weeks ago
Vision Achievement Kennedy Space Center, United StatesJob Description:Client: Engineering, Systems Integration, Fabrication, Entertainment Systems, ManufacturingThis position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check ...
-
Controls Engineer
4 weeks ago
Wunderlich-Malec Kennedy Space Center, United StatesWunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is:100% employee-owned company with over 40 years of industry historyA T ...
-
Controls Engineer
1 week ago
Blossom Hr Kennedy Space Center, United StatesAbout the job Controls Engineer · JOB DESCRIPTION: · We have a Controls Engineer position open in Orlando, FL. · This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentati ...
-
Controls Engineer
2 weeks ago
Vision Achievement Kennedy Space Center, United StatesJob Description:Client: Engineering, Systems Integration, Fabrication, Entertainment Systems, ManufacturingThis position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check ...
-
Controls Engineer
4 weeks ago
PEAK Technical Staffing USA Kennedy Space Center, United StatesWe have a Controls Engineer position open in Orlando, FL. This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance.Major Respo ...
-
Controls Engineer
1 week ago
Vision Achievement Kennedy Space Center, United StatesJob Description: · Client: Engineering, Systems Integration, Fabrication, Entertainment Systems, Manufacturing · This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation ...
-
Controls Engineer
4 weeks ago
Vision Achievement Kennedy Space Center, United StatesJob Description:Client: Engineering, Systems Integration, Fabrication, Entertainment Systems, ManufacturingThis position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check ...
-
Controls Engineer
1 week ago
Catapult Staffing Kennedy Space Center, United StatesWe have a Controls Engineer position open in Orlando, FL. This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance. RESPONSIBI ...
-
Controls Engineer
4 weeks ago
Lighting Staffing Agency Kennedy Space Center, United StatesAbout the job Controls Engineer JOB DESCRIPTION:This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance.RESPONSIBILITIES:Must ...
-
Controls Engineer
4 weeks ago
The Employee Connect Kennedy Space Center, United StatesAbout the job Controls Engineer Our Client has a Controls Engineer position open in Orlando, FL.This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out suppor ...
-
Controls Engineer
3 weeks ago
The Employee Connect Kennedy Space Center, United StatesAbout the job Controls Engineer · Our Client has a Controls Engineer position open in Orlando, FL. · This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out ...
-
Controls Engineer
3 weeks ago
PEAK Technical Staffing USA Kennedy Space Center, United StatesWe have a Controls Engineer position open in Orlando, FL. This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance. · Major R ...
-
Carollo Engineers Kennedy Space Center, United StatesPerforms basic instrumentation and control system engineering tasks and calculations for water and wastewater treatment facilities under the direction and supervision of a Staff Instrumentation Engineer. Assists in the development of P&ID's and assoc Controls Engineer, Instrument ...
-
Associate Controls Engineer
3 weeks ago
Universal Orlando Kennedy Space Center, United StatesJob Description & Requirements · // FOR DATA ORGANIZATION // · Below code block contains - Job Description & Apply/Refer & Share · Job Description & Requirements · Universal Orlando Resort believes in-person collaboration is key to our success. Many of our Team Members work in ...
Controls Engineer - Kennedy Space Center, United States - Vision Achievement
Description
Job Description:Client: Engineering, Systems Integration, Fabrication, Entertainment Systems, Manufacturing
This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance.
RESPONSIBILITIES:
•Debugging
•Government Agencies
•Mitigation
•Entertainment
•Instrumentation
•Protection
•Calculations
•Codes
•Customer Requirements
•Load
•Electrical Engineering
•Travel
•Problem Solving
•Components
•Purchasing
•Government
•AutoCAD
•Manufacturing
•Automation
•Contractors
•Specifications
•Integration
•Programming
•Windows
•Education
•Documentation
•Software
•Planning
•Maintenance
•Design
•Engineering