ELECTRONIC INTEGRATED SYSTEMS MECHANIC with Security Clearance - Hill Air Force Base, UT, United States - Department of Defense

Description

Duties The primary purpose of this position is: to remove, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions
The worker in this career field must demonstrate the ability to perform maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on automatic flight control systems, instrument systems, environmental systems, radar, communications, and navigation systems
Serves as an Air Reserve Technician (ART) providing training to assigned personnel in the accomplishment of tasks herein

Duties:
1:
Removes, installs, modifies, overhauls, maintains, troubleshoots, repairs, aligns, calibrates, and rebuilds multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions
2: Performs pretest, operational (functional), or final testing of electronic systems, components, or subassemblies
Complies with security procedures, regulations and policies
3: Advises engineering personnel on the operation and maintenance effects of proposed Time Compliance Technical Orders (TCTO) and/or modifications on new or existing equipment
4: Utilizes safety practices and tool control procedures following established safety rules and regulations to maintain a safe and clean work area
5: Prepares/executes effective training plans to maximize training
Documents/recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data and assists in design changes as necessary
Requirements Conditions of Employment

• U.S

Citizenship Required

• Males must be registered for Selective Service, see
• Must be able to obtain and maintain a secret security clearance
• If authorized, PCS will be paid IAW JTR and AF Regulations

If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement
More information on PCS requirements, may be found at:

• This posn is subject to provisions of the DoD Priority Placement Program
• Position may be subject to random drug testing
• Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
• Shift work and emergency overtime may be required
• Employee must maintain current certifications
• Disclosure of Political Appointments
• Must be a current member of the AF Reserve or willing/qualified to join
• Recruitment Incentive may be authorized for this position
• AFSC: 2A375 Qualifications

QUALIFICATIONS:
Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG Electronic Equipment Installation and Maintenance Family
Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying
Qualification requirements emphasis is on the quality of experience, not necessarily the length of time
The screen out element for this position is the ability to do the work of an Electronic Integrated Systems Mechanic without more than normal supervision


JOB ELEMENTS:
Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1:
Knowledge of electronic theories and practices of one or more complex integrated systems such as fire control, navigation, or automatic landing control systems; of integrated electronic, pneumatic, hydraulic, optical, fiber-optic, and mechanical systems; of such applications as radar, digital or analog computers, digital display devices, equipment cooling, and of the technology and practices which integrate these components into a total functional system; and of mathematics including algebra and trigonometric functions to adapt standard function to the specific requirements of the integrated systems
Knowledge of USAF Technical Order Program and its procedures
2: Skill in the use of standard hand and power tools of the electronics trade
Skill in the set up and operation of computer controlled automated test equipment (ATE) and test stands, oscilloscopes (dual trace, storage, digitized), spectrum, network and distortion analyzers, frequency counters, and signal generators; in interpreting complex drawings, specifications, and schematics of complete integrated systems to recognize the function and interconnections of components, assemblies, subassemblies, and connecting cable/fiber-optics harness; and in troubleshooting, installing, repairing, and maintaining electronic integrated systems where circuit theory must be used to understand the operation of a large number of circuits and functions, and the interaction of subsystems which create malfunctions
Skill in calibrating and adjusting components such as amplifiers, proximity boxes, generators, and voltage regulators
3: Comprehensive knowledge of testing and troubleshooting techniques and procedures utilizing a variety of test devices and ability to analyze, modify, and repair complex electrical or environmental systems and components on assigned aircraft
Comprehensive knowledge of operation, capabilities and limitations of complex electronic systems complicated by a variety of multi component assemblies and devices
4: Ability to read and interpret a variety of technical data such as schematic diagrams, blueprints and technical orders relating to the electronics trade
Ability to use a variety of electronic, electrical, or electromechanical test and measurement equipment
Ability to clean work area and/or job site upon completion of work
5: Ability to interpret and comply with regulations and instructions on security, safety, documentation, and other publications governing the performance of duties
Ability to effectively communicate with workers and supervisors in English using both oral and written reports
6: Basic computer skills are required
Individual must be able to access and use computer-based maintenance documentation and supply systems, and be capable of assimilating training on new systems as they are developed and implemented


OTHER SIGNIFICANT FACTS:

1:
Must be able to obtain and maintain a secret security clearance
2: Performs shift work with uncommon tours of duty
3: May be required to fly in military or contract aircraft for TDY maintenance or training, in accordance with the JTRs
4: May be required to support other units in performing maintenance
5: This is an Air Reserve Technician (ART) position
The incumbent is required to meet and maintain Air Force Reserve requirements
Work schedule will be aligned to allow incumbent to fully participate in unit training assemblies (UTA)
The incumbent's regular assignments are ART duties; however, the incumbent may be assigned some non-ART duties, generally not to exceed 30 percent of total responsibilities
6: This is a testing designated position (TDP)
The employee is subject to random drug testing


FUNCTIONAL REQUIREMENTS:
Heavy lifting (up to 40 lbs.)
Two-man lift for items exceeding 40 lbs
Heavy carrying (40 lbs.)
Reaching above the shoulder
Use of fingers
Both hands required
Hours of walking are approximately 4 hours/day
Hours of standing are approximately 4 hours/day
Hours of repeated bending are approximately 4 hours/week
Climbing, use of legs and arms
Both legs required
Operation of special purpose and/or motor vehicles
Near vision correctable at 13 inches to 16 inches to Jaeger 1 to 4
Far vision correctable in one eye to 20/20 and 20/40 in the other
Depth perception
Ability to distinguish basic colors
Ability to distinguish shades of color
Hearing (with or without aid permitted)
If it can be otherwise accommodated, a specific physical condition or impairment will not automatically disqualify a candidate


ENVIRONMENTAL FACTORS:
Work is performed in hangar areas, outdoors, in/on aircraft, and sometimes in hazardous noise areas
Exposed to extremes in heat, cold, humidity and inclement weather
Must work in confined areas and in awkward positions
Exposed to bodily fluids, dirt, grease, and aircraft fluids (oil, hydraulic, fuel, sealants, solvents, and hazardous fluids and gases)
Potentially exposed to Hydrazine, Halon, and/or composites, electrical shocks, RF radiation, and Low Observable (LO)
Subject to eye damage due to exposure to LASERs
Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces
Slippery or uneven walking surfaces
Working around machinery with moving parts
Working around moving objects or vehicles
May be exposed to intake suction and hot exhaust blast
Working closely with others
Working alone
PART-


TIME OR UNPAID EXPERIENCE:
Credit will be given for appropriate unpaid and or part-time work
You must clearly identify the duties and responsibilities in each position held and the total number of hours per week


VOLUNTEER WORK EXPERIENCE:

Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g.

, professional; philanthropic; religious; spiritual; community; student and social)
Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment
You will receive credit for all qualifying experience, including volunteer experience
Additional information Inte