- Makes inspection layout and first article inspection on machined parts, forgings, stampings, and sheet metal forms for use as reference guides to determine conformance to proper dimensions.
- Inspects all types of assemblies, sub-assemblies, final assemblies and installations.
- Records all inspection data and fills out all acceptance test procedures.
- Re-inspects all rework to meet requirements.
- Makes progressive and final inspection of components involving numerous precision tolerances dimension and angles that must be inspected by precision measuring instruments where no inspection jigs and/ or fixtures are available.
- Stamps or otherwise approves acceptable parts and prepares paperwork as required.
- Orders rejections and rework.
- Makes out rejection tags, inspection rework sheets, and properly records all data to quality control procedure.
- Informs supervisor of all rejections.
- Sets up and operates precision measuring instruments and gauges and all general inspection of equipment.
- Assists and instructs lower rated personnel in all phases of quality control operations.
- Performs re-inspection or other duties where work operations are essentially the same or of a less difficult nature.
- Follow all Senior policies and procedure.
- Other duties as assigned.
- High School Diploma or General Education Degree; and 3-5 years of related experience and/ or training; or equivalent combination of education and experience.
- Language:Ability to read and comprehend simple instructions, short correspondence, and memos.
- Reasoning Ability: Ability to apply a general understanding to carry out detailed, written and oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
- Mathematical Ability:Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to use shop mathematics.
- Other Abilities:Must be able to read and interpret blueprints. Must be able to apply a complete knowledge of inspection theory and practice. Must determine the acceptability of assemblies and parts. Must be able to use various precision measuring instruments to maintain quality control standards. Must be able to use tact and diplomacy with customer and government quality control representatives.
- Welding inspection checking fixtures, micrometers, scales, surface plates and tables, inspection stamps.
- Ferrous and non- ferrous metals and their alloys in the form of sheet tubular stock, machined and formed parts, welded parts and assemblies.
-
Inspector
2 weeks ago
Senior Aerospace SSP Burbank, United States**Summary**:This occupation requires inspecting all types of assemblies, sub-assemblies, final assemblies, and installations of machine parts, forgings, stampings, sheet metal forming for proper material, quality, machining dimensions and functional usability. · **Essential Dutie ...
-
Inspector I
1 week ago
INFRAMARK, LLC. Burbank, United StatesWe're Hiring · Looking for an Inspector I in our Burbank CA plant. The Inspector I is responsible for inspecting residential and commercial external plumbing systems that attach to sewer lines and ensuring conformity to governmental codes regarding material types and installation ...
-
Roof Inspector Wanted
1 week ago
ADCO Roofing & Waterproofing Burbank, United States**Responsibilities**: · - Performs roof inspections, locate issues, diagnose, and come up with resolutions. · - Reads blueprints of roofing systems and flashing details, takes pictures and makes sketches of areas needing repair. · - Locate and document roofing deficiencies. · - H ...
-
Independent Freight Inspector
2 weeks ago
Virtual Freight Inspections San Fernando Valley, United StatesThis work requires making on-site inspections, reviewing products and packaging for damage, taking notes and detailed photos, and then creating an inspection report utilizing VFI's proprietary online templates. · 1. Live in this market. · 2. Have their own mode of transportation ...
-
Inspector
2 weeks ago
Kinder Morgan Pasadena, United States**KINDER MORGAN** is one of the largest energy infrastructure companies in North America. We are a market leader in each of our businesses - Natural Gas Pipelines, Products Pipelines, CO2, and Terminals. We have an unparalleled, large footprint of diversified and strategically lo ...
-
Final Inspector
2 weeks ago
Precision Aviation Group Van Nuys, United StatesPrecision Aviation Group (PAG) is a leading provider of products and value-added services to the aerospace and defense industries worldwide. With 850,000-square-feet sales and services facilities in the United States, Canada, Australia, Singapore, Brazil - PAG's 23 locations and ...
-
Inspector
3 weeks ago
Bodycote Huntington Park, United StatesWe are currently interviewing for **Inspector C** in **Huntington Park, CA** · Bodycote is offering a $1500 sign-on retention bonus **We also offer**: · - Starting wages are $18.00/hour to $20.00/hour depending on experience. · - Paid holidays and paid time off. · - 401k with a m ...
-
Inspector
2 weeks ago
Proponent Inc Brea, United StatesThe Inspector performs timely and accurate inspection activities on incoming parts and materials, ensuring that high quality products are evaluated efficiently and moved into stock. During inspection, s/he verifies specified dimensions of product or material and compares results ...
-
Inspector Iii
2 weeks ago
Verus Aerospace Anaheim, United StatesWhen you join the Verus Aerospace team, you are more than a number - you are a valued part of our company family. Superior craftsmanship, employee pride and a shared commitment to continuous improvement are the foundation of our success. We have a strong reputation for profession ...
-
Termite Inspector
3 weeks ago
DEWEY PEST CONTROL Anaheim, United StatesWould you like to join the largest **family-owned** pest management company in California? We are seeking Termite Inspectors A valid Branch III field rep license is preferred. If you have a Branch II or applicator's license and are willing to advance your career, we will provide ...
-
Final Inspector
1 week ago
Summit Interconnect, Inc. Anaheim, United StatesThe Final Inspector is responsible for inspection of product after processes and at final inspection. This position requires attention to detail, good communication skills, and the ability to read and understand technical requirements of the traveler and blueprint.**Qualification ...
-
Chief Inspector
1 week ago
E2 Consulting Engineers, Inc. Los Angeles, United StatesAbout the Organization: · **E2 Consulting Engineers, Inc. (E2)** is a professional services firm established in 1988 specializing in a full spectrum of engineering services including, project engineering and design, federal base operations and infrastructure support services, gas ...
-
Residential Inspector
3 weeks ago
Hill International, Inc Los Angeles, United States**Hill International is seeking for an Inspector in Los Angeles, California · We are looking for a detail-oriented property inspector to inspect residential properties. You will be evaluating properties for compliance in construction regulations, inspecting the integrity of struc ...
-
Utility Inspector
3 weeks ago
E2 Consulting Engineers, Inc. Los Angeles, United StatesAbout the Organization: · **E2 Consulting Engineers, Inc. (E2)** is a professional services firm established in 1988 specializing in a full spectrum of engineering services including, project engineering and design, federal base operations and infrastructure support services, gas ...
-
Inspector
3 weeks ago
Aerotek Burbank, United StatesDescription: · If you're looking for a job ASAP and you have Inspection experience, then this is the role for you · An aerospace company in Burbank, Valencia and Simi Valley is looking for an Inspector to join the team · Aerotek provides a rapidinterview process so you start wor ...
-
Inspector Coordinator
3 weeks ago
Camin Cargo Control Inc. Pasadena, United StatesInspector Coordinator · 1.0 Corporate Job Title · Inspector Coordinator · 2.0 Reporting Relationships · Operations/Branch Manager · 3.0 Position Summary · This position is based in the branch office and manages and coordinates Petroleum Inspector's day-to-day related activities t ...
-
Track Inspector
2 weeks ago
Mott MacDonald Los Angeles, United StatesTrack Inspector · **Country**:United States**Position Location**:Los Angeles, CA**Contract Type**:Regular (US only)**Work Pattern**:Full Time**Sector**:Transport**Discipline**:Project programme and commercial management**Job Ref**:2589**Recruiter Contact**:Ruslan Curry- **Respons ...
-
Inspector, Quality
1 week ago
Bombardier North Hills, United StatesAt Bombardier, our employees work together to evolve mobility worldwide - one good idea at a time. If you have a good idea, we'll provide the environment where it will thrive and grow into a great product or customer experience. Your ideas are our fuel. · **In your role, you will ...
-
Special Inspector
2 weeks ago
Intertek Los Angeles, United States**Special Inspector** · Intertek PSI, is searching for a **Special Inspector **to join our Building & Construction team in our **Santa Fe Spring, CA **office. This is a fantastic opportunity to grow a versatile career in the architectural, engineering, and construction (A/E/C) in ...
-
Quality Inspector
2 days ago
StandardAero Van Nuys, United States**Shift: 4 10's Weekends (Fri-Mon 6:30a-4:30p)** · **Build an Aviation Career You're Proud Of** · At Western Jet Aviation, a company of StandardAero, we are committed to the quality of work we do at every level. You'll achieve more with us through our training, high standards, an ...
Inspector A - Burbank, United States - Senior Plc
Description
Who is Senior plc?Senior plc is an international, market-leading, engineering solutions provider with 30 operating businesses in 13 countries. Senior designs, manufactures and markets high-technology components and systems for the principal original equipment producers in the worldwide aerospace, defense, and land vehicle and power & energy markets. The Group is split into two divisions, Aerospace and Flexonics, servicing five key sectors.
Our global values underpin what we do, and how we do it ...
Safety - Integrity - Customer Focus - Respect & Trust - Accountability - Excellence
Who is SSP?
Senior Aerospace SSP, specializes in designing, manufacturing, and qualifying complex ducting systems for aerospace applications. Since its humble roots in 1945, the campus has now expanded to include a 59,000 sq. ft high-volume production facility, in addition to its legacy 131,000 ft2 main buildings which combined, accommodate over 500 employees. Vertically integrated with its own foundry, fabrication shop, and ISO certified engineering lab, Senior Aerospace SSP acquired by Senior PLC in 1995 and has continued its expansion into new programs and technologies.
Why join SSP?
Senior Aerospace SSP is the leader of innovative design and manufacturing methods in the area of complex aerospace systems. Joining out team will provide you with a rewarding career with a tight-knit and collaborative team. You will also enjoy a competitive compensation package that includes a market-led base salary, comprehensive benefits package along with wellness benefits, matching 401K plan and paid time off. Apply today for an opportunity to join our team
If offer of employment is made it will be contingent upon passing all of the following: Drug Test, Background Check, ITAR and U.S. Export Compliance Screening.
What does the job involve?
Summary: This occupation requires inspecting all types of assemblies, sub-assemblies, final assemblies, and installations of machine parts, forgings, stampings, sheet metal forming for proper material, quality, machining dimensions and functional usability.
Essential Duties and Responsibilities:
Under general supervision, must be able to perform a variety of job duties including, but not limited to:
Education and/or Experience:
• Access to our facility (and, therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) and/ or Export Administration Regulations (EAR) to U.S. Citizens, lawful permanent residents, U.S. refugees, asylees or temporary residents under amnesty provisions [as defined in 8 USC 1324b(a)(3)] and properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes. Additionally, potential employee's names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive technical data.