- Reports directly to the Program Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.
- Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.
- Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
- Strictly adheres to safety, quality standards.
- Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
- Ensures all tools listed on the "Required Tools List" are available for use within two weeks of your employment.
- Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.
- Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
- Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.
- Performs as Team Member, cooperating with the efforts of other trades during an installation, modification or repair operation.
- Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.
- Performs and/or verifies mechanical alignments.
- Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.
- Performs installation, repair, overhaul or modification in place or in shop to mechanical systems and components (e.g.; Valves, Actuators, Cylinders, Accumulators, Pumps, Launchers etc.).
- Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
- Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).
- Assists in rigging when necessary.
- Other duties as assigned.
- High school diploma/equivalent, Apprenticeship Diploma/additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine mechanical systems in a repair department or shipyard.
- One to two years' job experience.
- Has knowledge of the trade qualifications and performs as an entry level Outside Machinist.
- Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade.
- Has working knowledge of shipboard mechanical systems (repair/installation practices, procedures, alignments and troubleshooting) and blue print reading.
- Ability to use such precision measuring instruments as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators
- Possesses the ability to accurately record readings and measurements as well as complete documentation, repair, and testing of equipment. Will assist in rigging evolutions when necessary.
- Communicates effectively
- Works independently or in a group.
- Ability to do basic math, i.e. add, subtract, divide and multiply.
- Ability to read, write, speak, and comprehend English.
- Ability to obtain and maintain National Security Clearance Level Secret.
- Ability to obtain access to military and government installations worldwide.
- Ability to travel for extended periods several times per year.
- Current security clearance
- Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.
- Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
- Able to lift, carry and move objects up to 50 lbs. in weight.
- Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
- Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
- Able to perceive and distinguish normal range of colors.
- May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.
-
Outside Machinist
1 day ago
Shipyard Staffing Norfolk, United StatesJob Description · Job DescriptionShipyard Staffing is currently hiring for Outside Machinist for work in Newport News, VA. · Outside Machinist Job Description: · The Outside Machinist position is responsible for removing, installing, and testing main and auxiliary shipboard equip ...
-
Outside Machinist
4 days ago
Tidewater Staffing Chesapeake, United StatesOutside Machinist · An outside machinist installs and repairs equipment, sets up and handles manufacturing machinery and ensures that production equipment is adequate and functional. The machinist also operates machines manually or through control mechanisms, inspects equipment a ...
-
Outside Machinist
2 weeks ago
International Marine and Industrial Applicators Portsmouth, United StatesAre you interested in joining the only national marine surface preparation painting contractor servicing every U.S. Port? If so, IMIA is the company for you. Dont miss this opportunity to become part of our dynamic team. Apply today. JOB TITLE: OUTSIDE MACHINIST REPORTS TO: STRUC ...
-
Outside Machinist
1 week ago
Walashek Norfolk, United StatesThe Outside Machinist position is responsible for the installation of propulsion machinery, sea valves, steering gear, anchor handling equipment, elevators, pumps, ventilation fans, cooling coils, refrigeration units, compressors, weapons systems, remote operators, radars, and an ...
-
Outside Machinist
1 week ago
Tidewater Staffing Chesapeake, United StatesOutside Machinist · An outside machinist installs and repairs equipment, sets up and handles manufacturing machinery and ensures that production equipment is adequate and functional. The machinist also operates machines manually or through control mechanisms, inspects equipment a ...
-
Outside Machinist
1 day ago
Aerotek Portsmouth, United States**Description:**Oceaneering is looking for a 1st Class Outside Machinist who has an active secret security clearance or have had one in the last 24 months. Responsible for the overhaul and repairing of **submarine torpedo tube or "sail".**There are no licenses or certificates req ...
-
Outside Machinist
1 week ago
Insight Global Chesapeake, United StatesInsight Global is looking to help build out an Outside Machinist team to help support a federal client. The outside machinist will be helping in the repair and install phase upon different submarines. The outside machinist will be reading designs and drawings, measuring material, ...
-
Outside Machinist
5 days ago
Marine Hydraulics International, LLC Norfolk, United StatesJob Description · Job DescriptionMHI Ship Repair & Services is a major marine repair and conversion contractor serving the U.S. Navy, Military Sealift Command, Maritime Administration and Commercial ship owners and operators worldwide. Our ship yard is conveniently located in the ...
-
Outside Machinist
1 week ago
Tidewater Staffing Norfolk, United States Part timeTidewater Staffing is seeking Outside Machinists for work in Norfolk, VA. An outside machinist installs and repairs equipment, sets up and handles manufacturing machinery and ensures that production equipment is adequate and functional. The machinist also operates machines manual ...
-
Outside Machinist
4 days ago
Shipyard Staffing LLC Portsmouth, United States Full timeShipyard Staffing is currently hiring for Outside Machinist with an ACTIVE SECRET CLEARANCE for work at Norfolk Naval Shipyard in Portsmouth, VA. · Must have a fully adjudicated Secret Clearance · Must be a U.S. Citizen · Must be able to obtain a RED NAVSEA badge · Must be able t ...
-
Outside Machinist
6 days ago
International Marine and Industrial Applicators South Norfolk, United States Full time· JOB TITLE: OUTSIDE MACHINIST · REPORTS TO: STRUCTURAL SUPERINDENDENT · SUMMARY · Remove, repair, overhaul, install and align main propulsion machinery and associated equipment/components. Also remove, repair, overhaul, install and align equipment associated with auxiliary syst ...
-
Outside Machinist
1 day ago
Walashek Norfolk, United StatesThe Outside Machinist position is responsible for the installation of propulsion machinery, sea valves, steering gear, anchor handling equipment, elevators, pumps, ventilation fans, cooling coils, refrigeration units, compressors, weapons systems, remote operators, radars, and an ...
-
Outside Machinist
1 week ago
BuildSubmarines Norfolk, United StatesTidewater Staffing is currently seeking Outside Machinist for work located in Norfolk, VA. This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic ...
-
Outside Machinist
1 week ago
CTR GROUP Norfolk, United StatesCTR Group is seeking several Outside Machinist's. Immediate openings and urgently hiring What We Offer:Weekly Pay - you receive a paycheck every week Comprehensive Benefits Package Safety First Pay: $25 SKILLS: Experienced in machinery overhaul and Machinist, Staffing, Skilled Tr ...
-
Outside Machinist
1 week ago
Aerotek Norfolk, United StatesAerotek is currently looking for Outside machinist or diesel engine mechanics with at least 3 years of experience working on board commercial or naval ships; pay is up to $25 an hour if you are currently looking for work please apply here. All candidates with previous navy experi ...
-
Outside Machinist
1 week ago
BuildSubmarines Portsmouth, United States· JOB TITLE: OUTSIDE MACHINIST · REPORTS TO: STRUCTURAL SUPERINDENDENT · SUMMARY · Remove, repair, overhaul, install and align main propulsion machinery and associated equipment/components. Also remove, repair, overhaul, install and align equipment associated with auxiliary syst ...
-
Outside Machinist
4 days ago
Shipyard Staffing Norfolk, United StatesJob Description · Job DescriptionShipyard Staffing is currently hiring for Outside Machinist with Active Secret Clearance for work in the Hampton Roads area. · Outside Machinist Position Summary · Repair, modify or overhaul various types of equipment or systems. Set up and operat ...
-
Outside Machinist
3 days ago
Tidewater Staffing Norfolk, United StatesTidewater Staffing is currently seeking Outside Machinist for work located in Norfolk, VA. This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic ...
-
Outside Machinist
5 days ago
Tidewater Staffing Norfolk, United StatesTidewater Staffing is currently seeking Outside Machinist for work located in Norfolk, VA. This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic ...
-
Outside Machinist
1 week ago
Tidewater Staffing Norfolk, United States FreelanceTidewater Staffing is currently seeking Outside Machinists for work in various local shipyards · Job Description: · The Outside Machinist must possess knowledge, skills and abilities to perform job operation/tasks on conventional and nuclear ships and submarines. The Outside Mach ...
Outside Machinist I - Portsmouth, United States - EPSILON SYSTEMS
Description
Job Description
Epsilon Systems Mission Readiness Group is currently seeking a full-time Outside Machinist I for the Hyperbarics Division in Portsmouth, VA.Summary
Repairs, modifies or overhauls various types of equipment or systems related to hyperbaric and diver life support systems. Sets up and operates portable machining tools or equipment with constant supervision.
Responsibilities
Requirements
Preferred Qualifications
ADA Notations: