Manufacturing Engineer - Emory, United States - Ultra Clean Asia Pacific

Ultra Clean Asia Pacific Emory, United States

2 weeks ago

Description

Join UCT and be part of the fastest-growing sector in the world
We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence.

This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it.

UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations.

If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today

UCT is looking for a talented Manufacturing Engineer to join us in Singapore

Job Summary:
Responsible to assist in supporting the production build of various systems on the manufacturing floor.

Responsible for planning and conducting independent work requiring judgment in the evaluation, selection, application and adaptation of Manufacturing techniques, procedures and criteria.

Devise new approaches to problems, and prepare or modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable build and quality standards.

Essential Duties and Responsibilities:

Requires a broad knowledge of Manufacturing Practices, Assembly Prints, Bill of Materials to be able to create Manufacturing ready documentation such as S.O.E.'s (Sequence of Events) and Assembly Process Workflow.

Establish process for manufacturing and create work instruction for assembly in MES System.

Provides technical direction and on-the-job training to production staff.

Evaluate manufacturing process and create process control plan, PFMEA and Risk assessment.

Must comply to POR and CE Compliance.

Work with Manufacturing, Engineering, Quality department to drive Continuous improvement on quality, efficiency and manufacturing cycle time.

Initiate and support Design For Excellence and manufacturing process improvement / standardization.

Engage with IE to optimize layout and product layout floor for new and existing plants.

Implement Lean line using DFT concept with relevant Jig and Fixture.

Technical solve and support for trouble shooting issue, quality issue, first pass yield issue.

Participate in product transfer:
Coordinate the team for training, understand the equipment, facility requirement, build and test requirements.

Liaise and coordinate with Engineering and Material department on spec, BOM and material changes/issues.

Liaise and coordinate with Quality department on Supplier quality and Customer quality issue including RCCA, 8D preparation.

Liaise and coordinate with Test Engineering department on testing development or testing issue.

Liaise with customer for all BOM / drawing / design issue by generating problem report / supplier problem sheet / Supplier request deviation with single page summary.

Involve in MRB (Material Review Board) meeting, make justifiable disposition, analyst data and work with relevant departments / suppliers to reduce non-conformance.

Minimum CAD knowledge to analyst 3D drawing from customer.

Initiate Engineering change and waiver for any change required.

Working in ERP System for engineering master control and change.

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job.

Duties, responsibilities and activities may change at any time with or without notice.

Knowledge, Skills and Abilities:
Lean Manufacturing Principles, Six Sigma Greenbelt preferred.

Familiarity with semiconductor capital equipment.

Knowledge of electronic Work Instruction software is a plus (i.e. Sequence).

ERP System Software.

Excellent computer skills in Microsoft Suite, emphasis in Excel.

Prior experience leading small teams to achieve project success.

Good Interpersonal skills; ability to work alone or in team environment.

Educational/Certification Requirement:
Bachelor's Degree in Mechanical/Electrical/Electronics /Mechatronics/Industrial Systems Engineering.

Diploma in Mechanical / Electrical / Electronics / Mechatronics / Industrial Systems Engineering with minimum 5 years working experience in related field can apply.

Experience Requirement:
Minimum 2 years relevant experience (5 years for diploma holder).

Exposure to semiconductor industry preferred.

Experience on setting up lean line will be very important.

Know and able to explore full BOM structure (more than 1,000 line) is needed.

Self-motivated and resourceful.

Possesses drive with "can-do" attitude.

Capable of developing positive work relationship, a favorable work environment within the team and other functional group.

Must able to perform and demonstrate good workmanship understanding according to industrial standard.

Good interpersonal, communication and presentation skill.

Able to perform any other task assigned by manager / supervisor.

Comply to work ethics and integrity.

Candidate with Six Sigma Knowledge is a plus.

At Ultra Clean Technology, we do not just welcome diversity - we celebrate it Ultra Clean Technology is proud to be an equal opportunity employer.

We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations.

#J-18808-Ljbffr

Manufacturing Engineering

2 weeks ago

Skywalk Visa Immigration Services LLP Emory, United States

CALL AND WHATSAPP TO MR AMAN · We are looking for a talented manufacturing engineer to oversee and improve manufacturing processes. The manufacturing engineer's responsibilities include identifying areas for improvement, maintaining high levels of manufacturing and product quali ...
Manufacturing Engineer

2 weeks ago

S S M C Emory, United States

Job Description: Engineer at SSMC · SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining a fully equipped SMIF cleanroom environment, 100% equipm ...
Manufacturing Engineer

2 weeks ago

Emerson Asia Pacific Private Limited Emory, United States

Job Responsibilities: · Ensures processes and equipment are operated in compliance with Environment, Health, and Safety Regulations and Policies. · Develops, and updates manufacturing procedures and related documentation following Global Quality Distribution Standards. · Appli ...
Manufacturing Engineer

1 week ago

PREMIER HYTEMP PTE. LTD. Emory, United States

Roles & Responsibilities · Manufacturing Engineer (Machining) · This position reports to the Technical Manager and is responsible for providing technical support to the machine shop and subcontract vendors on complex machining methods for both Premier Hytemp Singapore and Malays ...
Manufacturing Engineer

5 days ago

Abbott Emory, United States

Primary Function/Primary Goals/Objectives · Provides support to the Manufacturing organization to facilitate the efficient operations within the production area. To optimize existing processes and to ensure that production goals are met. Ensures attainment of level of production ...
Manufacturing Engineer

4 weeks ago

OCULUS PRIVATE LIMITED Emory, United States

Job Description · Coordinate and direct the installation, testing, operation, maintenance, and repair of facilities and equipment · Develop standards and procedures for the engineering and technical work performed in the department · Assist in analysis of maintenance trends, e ...
Manufacturing Engineer

2 weeks ago

Anradus Pte Ltd Emory, United States

Key Responsibilities: · Prepare production drawings by 2D drafting or 3D modeling using CAD software for design and build-to-print jobs. · Carry out manufacturing process planning using ERP. · Prepare Bills of Material from customer drawings or in-house designs. · Provide tec ...
Manufacturing Engineer

2 weeks ago

Sunningdale Tech Emory, United States

Job Highlights · 12 Hrs Day & Night Shift (4 Days) · Min Diploma / Degree in Engineering or equivalent · Attractive Remuneration Package · Responsibilities: · Leading a team of operators, technicians and supervisors. · Liaise with Supervisors, Engineers, Planners and other r ...
Engineer II, Manufacturing Engineering

2 weeks ago

Thermo Fisher Scientific Emory, United States

About Thermo Fisher Scientific · When you're part of the team at Thermo Fisher Scientific, you'll do important work. And you'll have the opportunity for continual growth and learning in a culture that empowers your development. With revenues of more than $40 billion and the large ...
Associate Manufacturing Engineering Engineer

1 week ago

PERKINELMER SCIENTIFIC (SINGAPORE) PTE. LTD. Emory, United States

Roles & Responsibilities Summary · Responsible for product line quality and efficiency so as to achieve production KPIs. Introduce productivity improvement through Lean processes, automation, preventive maintenance and better tools / jigs / fixtures design. Managing engineering p ...
Manufacturing Process Engineer

2 days ago

MAKINO ASIA PTE LTD Emory, United States

Roles & Responsibilities · Primary Roles · To engineer new and innovative processes and improve productivity from existing processes in the Rotary Work Head assembly section. · Main Duties & Responsibilities · Develop and implement effective process strategies for in-house de ...
Principal Manufacturing Engineer

2 weeks ago

PERKINELMER SCIENTIFIC (SINGAPORE) PTE. LTD. Emory, United States

Roles & Responsibilities Summary · Identify, develop and drive strategic engineering initiatives particularly in relation to Quality, Cost, Productivity improvement. Lead NPI and Product Transfer Projects to successful completion. · Key Accountabilities · Responsible for site En ...
Fab10 Manufacturing Engineer

2 weeks ago

Micron USA Inc Emory, United States

Our Vision: · Our vision is to transform how the world uses information to enrich life for all. Join an inclusive team passionate about one thing: using their expertise in the relentless pursuit of innovation for customers and partners. The solutions we build help make everything ...
Manufacturing/Factory Mechanical Engineer

2 weeks ago

Recruit Express Emory, United States

Job Description: · To manage and administer with technical competence, all manufacturing plants' equipment & building facilities and services in factory meet company operating plans, budgets and goals. · Define, propose and monitor the Maintenance and Improvement (M&I) plans an ...
Team Lead Manufacturing Engineer

2 weeks ago

Talent Trader Group Emory, United States

Responsibilities: · Lead and supervise a team of manufacturing operators to ensure smooth and efficient production operations. · Monitor production schedules and targets, and take corrective actions as needed to meet customer requirements. · Train new employees on safety proce ...
Senior Manager, Manufacturing Engineering

2 weeks ago

Rockwell Automation Emory, United States

About Rockwell Automation · Rockwell Automation is a global technology leader focused on helping the world's manufacturers be more productive, sustainable, and agile. With more than 28,000 employees who make the world better every day, we know we have something special. Behind ou ...
New Product Manufacturing Engineer, E3

4 weeks ago

APPLIED MATERIALS SOUTH EAST ASIA PTE. LTD. Emory, United States

Key Responsibilities · Identify, assess, audit, and manage PCB and PCBA suppliers for PCBA designs from AMAT with the goal of extending the approved PCBA vendors available to Applied Materials. · Lead cross functional teams to increase the manufacturing and testing capabilities ...
Manufacturing Engineer

1 week ago

MAHLE North America Belmont, United States

The Manufacturing Engineer supports design engineers in design-for-manufacturing, works with operational technical experts in designing tools, fixtures, programs and equipment to support a high quality, repetitive, economically competitive products. Manufacturing Engineer, Manufa ...
Snr Manufacturing Engineer, NPI Test

4 weeks ago

ASM FRONT-END MANUFACTURING SINGAPORE PTE. LTD. Emory, United States

Who is ASM? · ASM is a leading, global supplier of semiconductor wafer processing equipment. Our ambitious team is dedicatedto delivering innovative technology solutions to the world's leading semiconductor manufacturers. We have over3,800 employees based in 14 countries, includ ...
Manufacturing Engineer

2 weeks ago

Mahle Inc. Belmont, United States

Summary · The Manufacturing Engineer supports design engineers in design-for-manufacturing, works with operational technical experts in designing tools, fixtures, programs and equipment to support a high quality, repetitive, economically competitive products. Accountable for the ...