- Operate Stud Pull Test procedure and certified spec.
- Operate Die Shear Process Test Procedure and certified specifications.
- Operate and inspect X-ray.
- Operate XYZ Micro VU measurement tool.
- Recognize and select fixture and tooling.
- Operate UV cure.
- Recall and select profile for die attach reflow on RTC furnace silver glass.
- Recall and select profile for die attach reflow on WJ furnace hermetic and solder paste.
- Recall plasma machine program per traveler instruction.
- Manual silver glass die attach operation.
- Clean procedure (remove flux) bake.
- Manual dam & fill can control fillet around the die given less space on cavity of the package.
- Manual under fill and cure process.
- Operate Flip Chip Attach "SEC" machine.
- Operate Asymtek dispensing machine – old and new version.
- Operate MAT 6400 and Datacon.
- Mix glass beads in to epoxy follow the mix ration.
- Die attach with customer consigned epoxy (high or low viscosity).
- Manual attach DAP die without epoxy.
- Manual stacks dies attach or components attach.
- Tiny die (less than 0.015") use wood stick pickup epoxy for DA. Thin die (less than 0.006") use wood stick pickup epoxy for DA.
- Manual or Auto dispense and attach stiffener to device.
- Recall Program Flip Chip Attach "SEC machine".
- Recall program on Asymtek dispensing machine – old and new version.
- Recall program on MAT 6400.
- Recall program Datacon Operation.
- Recall profile for silver glass reflow on RTC Furnace and Glass Seal.
- Recall profile for die attach reflow on WJ Furnace Hermetic and Solder paste.
- Select Eutectic Die Attach tooling, setup heat block temperature and operate machine.
- Setup Eutectic Die Attach machine included temperature.
- Operate Eutectic Die Attach manual.
- Setup new program Flip Chip Attach "SEC Machine".
- Setup new program on Asymtek dispensing machine old and new version.
- Setup New Program on MAT 6400.
- Setup New Program on Datacon Operation.
- Proficient in all department skills.
- Set-up and operate automatic/manual Die Attach, Flip Chip and Dispenses equipment.
- Operate a variety of equipment, including high-powered microscopes, with speed and accuracy.
- Follow job traveler instructions accurately.
- Identify and report process deviations to supervisor.
- Meet quality goals, safety requirements, and follow company policies.
- Flexibility to perform other duties as assigned.
- 6 months of semiconductor assembly in a Production environment preferred.
- Experience in second optical inspection may be applicable.
- Experience with:
- Manual Die Attach operation, Microscope and manual Dispense equipment (EFD, etc.).
- Manual Dam & Fill operation and automatic equipment (Asymtek, etc.)
- Automatic Die Attach bonders (Datacon, MAT6400, etc.)
- Semi-automatic Flip Chip bonders (SEC860, etc.)
-
Backgrind Operator Level 4
3 weeks ago
Integra Technologies. Milpitas, United StatesJob Description · Job DescriptionIntegra Technologies is not accepting unsolicited assistance from search firms for this employment opportunity. Please, no phone calls or emails. All resumes submitted by search firms to any employee at Integra Technologies via email, the Internet ...
-
Quality Control Operator Level 2
2 weeks ago
Integra Technologies. Milpitas, United StatesJob Description · Job DescriptionSalary is dependent on experience and education. · JOB DESCRIPTION · Job Code: · Reports To: Quality Control Production Manager · Department Name: 196 – Quality Control · FLSA Status: Non-Exempt · POSITION SUMMARY · Use microscopic equipment f ...
-
Quality Control Operator Level 3 Days
2 weeks ago
Integra Technologies. Milpitas, United StatesJob Description · Job DescriptionJOB DESCRIPTION · Job Title: Quality Control Operator All Levels FLSA Status: Non-Exempt · Job Code: · Reports To: Quality Control Production Manager · Department Name: 196 – Quality Control · Location: Silicon Valley · POSITION SUMMARY (Brie ...
-
Enterprise Applications Manager
3 weeks ago
TDK Headway Technologies, Inc. Milpitas, United States**FLSA STATUS: EXEMPT** · **REPORTS TO: SR. DIRECTOR MIS** · **SUMMARY**: · **ESSENTIAL FUNCTIONS**: · - Manages, develops, and evaluates personnel to ensure the efficient operation of the department; makes employment-related decisions as necessary, including hiring and terminati ...
-
2nd Optical Inspector Level 1
2 weeks ago
Integra Technologies Silicon Valley, LLC Milpitas, United States**Position Title**:Second Op Operator All Levels**Reports To**:Production Manager**Location**:Silicon Valley**FLSA Status**:Non-Exempt*** · Use microscope equipment to perform visual inspection of die and other components by following standard and customized requirements per cust ...
-
Equipment Maintenance Technician
3 weeks ago
TDK Headway Technologies, Inc. Milpitas, United States**A-SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY FROM 6:00 AM TO 6:00 PM** · **FLSA STATUS: NON-EXEMPT** · **REPORTS TO: EQUIPMENT MAINTENANCE SUPERVISOR** · **SUMMARY**: · Under the direction of the Equipment Maintenance Supervisor, the Equipment Maintenance Technician ...
-
Equipment Maintenance Technician
3 weeks ago
TDK Headway Technologies, Inc. Milpitas, United States**B-SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY FROM 6:00 PM TO 6 AM** · **FLSA STATUS: NON-EXEMPT** · **REPORTS TO: EQUIPMENT MAINTENANCE SUPERVISOR** · **SUMMARY**: · Under the direction of the Equipment Maintenance Supervisor, the Equipment Maintenance Technician is ...
-
Fib Technician
3 weeks ago
TDK Headway Technologies, Inc. Milpitas, United States**FLSA STATUS: NON-EXEMPT** · **A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY FROM 6:00 AM TO 6:00 PM** · **REPORTS TO: DIRECTOR, ROCESS CHARACTERIZAITON/NPI** · **SUMMARY**: · Under the direction of the Director Process Characterization/NPI, the FIB Technician provides ...
-
Equipment Maintenance Technician
3 weeks ago
TDK Headway Technologies, Inc. Milpitas, United States**D-SHIFT: FRIDAY THRU SUNDAY EVERY OTHER THURSDAY 6:00 PM-6:00 AM** · **FLSA STATUS: NON-EXEMPT** · **REPORTS TO: EQUIPMENT MAINTENANCE SUPERVISOR** · **SUMMARY**: · Under the direction of the Equipment Maintenance Supervisor, the Equipment Maintenance Technician is responsible ...
-
Equipment Maintenance Technician
2 weeks ago
TDK Headway Technologies, Inc. Milpitas, United States**D-SHIFT: FRIDAY THRU SUNDAY EVERY OTHER THURSDAY 6:00 PM-6:00 AM** · **FLSA STATUS: NON-EXEMPT** · **REPORTS TO: EQUIPMENT MAINTENANCE SUPERVISOR** · **SUMMARY**: · Under the direction of the Equipment Maintenance Supervisor, the Equipment Maintenance Technician is responsible ...
-
Equipment Maintenance Technician
3 weeks ago
TDK Headway Technologies, Inc. Milpitas, United States**B-SHIFT: MONDAY THRU WEDNESDAY EVERY OTHER THURSDAY 6:00 PM-6:00 AM** · **FLSA STATUS: NON-EXEMPT** · **REPORTS TO: EQUIPMENT MAINTENANCE SUPERVISOR** · **SUMMARY**: · Under the direction of the Equipment Maintenance Supervisor, the Equipment Maintenance Technician is responsib ...
-
Equipment Maintenance Technician
3 weeks ago
TDK Headway Technologies, Inc. Milpitas, United States**C SHIFT: FRIDAY THRU SUNDAY EVERY OTHER THURSDAY FROM 6:00AM - 6:00PM** · **FLSA STATUS: NON-EXEMPT** · **REPORTS TO: EQUIPMENT MAINTENANCE SUPERVISOR** · **SUMMARY**: · Under the direction of the Equipment Maintenance Supervisor, the Equipment Maintenance Technician is respons ...
-
Office Dispatcher
3 weeks ago
Upgrade Home Services Milpitas, United States**Job Summary** · The Dispatcher supports the day-to-day operations of the company by efficiently scheduling and dispatching technicians to calls. This role requires the dispatcher to think critically to ensure they are dispatching the best fit technician for the call. · **Essent ...
-
Manufacturing Engineering Technician Cmp
3 weeks ago
TDK Headway Technologies, Inc. Milpitas, United States**D-SHIFT: FRIDAY THRU SUNDAY AND EVERY OTHER THURSDAY FROM 6:00 PM TO 6:00 AM** · **REPORTS TO: MANAGER, CMP MANUFACTURING ENGINEERING** · **SUMMARY**: · Under the direction of the Manager of CMP Manufacturing Engineering, the Manufacturing Engineering Technician provides suppor ...
-
Probe Technician
3 weeks ago
TDK Headway Technologies, Inc. Milpitas, United States**SHIFT: MONDAY THRU FRIDAY 12:00 PM TO 8:00 PM** · **REPORTS TO: MANAGER, MANUFACTURING INTEGRATION** · **SUMMARY**: · Under the direction of the Manager of Manufacturing Integration, the Probe Technician provides support to the manufacturing and engineering teams in the probe a ...
-
Manufacturing Engineering Technician Cmp
3 weeks ago
TDK Headway Technologies, Inc. Milpitas, United States**C-SHIFT: FRIDAY THRU SUNDAY AND EVERY OTHER THURSDAY FROM 6:00 AM TO 6:00 PM** · **REPORTS TO: SR. MANAGER, CMP PROCESS DEVELOPMENT** · **SUMMARY**: · Under the direction of the Sr. Manager of CMP Process Development, the Manufacturing Engineering Technician provides support to ...
-
General Helper
3 weeks ago
T. Marzetti Company Milpitas, United StatesAbout Us: · T. Marzetti Company, a wholly owned subsidiary of Lancaster Colony Corporation (NASDAQ: LANC), is a manufacturer and marketer of specialty food products for the retail and foodservice markets. Our retail brands include Marzetti, New York Bakery and Sister Schubert's, ...
-
Buyer/planner
2 weeks ago
UGSI Solutions, Inc. Milpitas, United StatesPSI Water Technologies, Inc. (the "Company") is a wholly-owned subsidiary of UGSI Solutions, Inc., a global provider of on-site hypochlorite generation equipment, polymer activation systems, chemical feed systems, and potable water mixing and treatment systems serving the water a ...
-
Supply Chain Specialist
3 weeks ago
Stage 4 Solutions Inc Milpitas, United States**Supply Chain Specialist (Milpitas, CA)** · We are looking for a Supply Chain Specialist for a global B2B high-tech company. In this role, you will be accountable for the development, planning, execution, and management of various activities related to materials and inventory co ...
-
Front Office Manager
3 weeks ago
Sonesta Milpitas, United States**Job Description Summary** · The Front Office Manager sets the tone for Sonesta's Culture of Caring. We expect leaders to focus on creating amazing moments for guests and team members and dig deep to find ways to create success for their team. Sonesta managers are guest-focused ...
Die Attach Operator Level 3 - Milpitas, United States - Integra Technologies.
Description
Job Description
Job DescriptionSalary is dependent on experience and education.Integra Technologies is not accepting unsolicited assistance from search firms for this employment opportunity. Please, no phone calls or emails. All resumes submitted by search firms to any employee at Integra Technologies via email, the Internet, or in any form and/or method without a valid written search agreement in place for this position will be deemed the sole property of Integra Technologies. No fee will be paid in the event the candidate is hired by Integra Technologies as a result of the referral or through other means.
JOB DESCRIPTION
Job Code: 25550, 25551, 25552, 25553
Reports To: Production Manager
Department Name: 170 - Mfg - Die Attach-Flip Chip
FLSA Status: Non-Exempt
POSITION SUMMARY
Perform automatic and manual die bonding with various equipment that bonds integrated circuit dies to substrates, lead frames and package cavity.
KEY RESPONSIBILITIES/ESSENTIAL FUNCTIONS INCLUDE
Level 1:
Level 2:
Level 3:
Level 4
JOB REQUIREMENTS INCLUDE
Education: High School diploma or above required.
Experience:
Knowledge/Skills:
SUPERVISORY RESPONSIBILITIES
Total Number of Employees Directly Supervising: _0_
Number of Subordinate Supervisors Reporting to Position: _0_
This job description is intended to describe the general nature and level of work being performed. This is not intended to be an all-inclusive list of responsibilities, duties, skills required of employees so classified.
In addition, this is not an employment contract and should not be construed or interpreted as creating an implied or expressed guarantee of continued employment. The employment relationship at Integra Technologies Inc is by mutual consent (Employment at Will).
PHYSICAL REQUIREMENTS INCLUDE
In an average workday, employee must (check one frequency for each task):
Task
None
Occasional
Frequent
Constant
Stand
☐
☐
☐
☒
Walk
☐
☐
☐
☒
Sit
☐
☐
☒
☐
Bend/stoop
☐
☐
☐
☐
Climb
☐
☒
☐
☐
Reach above shoulders
☐
☒
☐
☐
Squat/crouch/kneel
☐
☒
☐
☐
Push/pull
☐
☐
☐
☐
Lift
☐
☐
☒
☐
Usual amount
☐ <10 lbs
☐ 11-25 lbs
☒ 26-50 lbs
☐ 51+ lbs
Carry
☐
☐
☐
☐
Usual amount
☐ <10 lbs
☐ 11-25 lbs
☒ 26-50 lbs
☐51+ lbs
Employee must use hands for repetitive action such as (please check all):
Task
Right
Hand
Left
Hand
Simple grasping
☐ Yes
☐ No
☐ Yes
☐ No
Firm grasping
☐ Yes
☐ No
☐ Yes
☐ No
Fine manipulation
☐ Yes
☐ No
☐ Yes
☐ No
WORKING CONDITIONS INCLUDE
In an average workday, employee is exposed to (check one frequency for each task):
Task
None
Occasional
Frequent
Constant
General shop or store conditions
☐
☐
☐
☒
General office environment