Jobs
>
New York City

    Safety Diagnostics Calibration Engineer - New York, United States - Ztek Consulting

    Ztek Consulting
    Ztek Consulting New York, United States

    2 weeks ago

    Default job background
    Description

    JOB DESCRIPTION:

    Below, you will find a complete breakdown of everything required of potential candidates, as well as how to apply Good luck.

    """Calibrate the diagnostic to ensure failure mode detection while at the same time minimizes the risk of false pass and false fail.

    Validate the diagnostic software strategy – shorted high, shorted low, open circuit, rationality, functionality, for LV1 and LV2.

    Write software change requests to improve diagnostic strategies or reduce warranty as necessary.

    Support VRT Engineer to resolve issues related to Torque Security diagnostic performance in vehicle testing.

    Support VRT engineer as needed in the development of new test procedures for fully electrical vehicles.

    Reviews VRT test results with VRT engineer insure correct DTC is set as well as MIL and MIL settings.

    Perform DTC validation to insure the MIL and/or ETC lamps is on as expected.

    Perform DTC validation and confirm the correct vehicle reaction and limp home occurs to insure the vehicle behaves in a safe manner.

    Validate calibrations according to the DVP&R.

    Review engine scan data with PTSR Reliability Engineers to develop action plans to identify root cause of System Reliability, Durability and 3/36 fleet issues. Coordinate fleet issue response.

    The SDO engineer role involves 3 key responsibilities :

    Development and implementation of diagnostic requirement for Powertrain components (Engine, Transmission, Electrified and Hybrid Powertrain, etc) and ensure compliance with CARB regulations.

    Receive high level functional and technical safety requirements from Powertrain SDO team,

    Develop Functional and Technical Safety concepts and architectures to ensure compliance with

    ISO26262

    Support in implementation of these for each Powertrain components.

    Support AfterSales team with inputs for creation/review of the Diagnostic Synthesis Table (DST)/Technical Specification Document(TSD) for MAKE/BUY components.""

    ""Bachelor's degree and IC in electrical, mechanical or controls engineering

    Computer Information, or other suitable degree Engineering degree from a university).

    Good multi-tasking ability, organized

    Experience with cross regional teams

    Driver's license in region for vehicle testing

    Experience in Powertrain development with domain knowledge in either Conventional or electrified powertrain.

    Experience in developing diagnostic requirements and software implementation in line with OBD II regulations.

    Good understanding of DTC proposal requirements, MiL and other warning lamp requirements, AECD requirements.

    Experience in Functional Safety development and knowledge of ISO Experience in reviewing HARA, creating FSC and TSC, ASIL requirements and decomposition. Experience in FMEA, FMEDA and FTA.

    Knowledge of SAE standards like SAE J1979, SAE J2012, SAE J1968.

    Experience in various CAN communication protocols and usage of tools like CANalyzer, etc.

    Experience with calibration tools like INCA and MDA.

    Experience in HiL validation.

  • Talascend

    Calibration Engineer

    2 weeks ago

    Talascend New York, United States

    A Talascend client is in search of a Calibration Engineer with experience in emissions and On-Board Diagnostics (OBD) to join their team. This is a hybrid role, with on-site work based at our client's facility in Dearborn, MI. · The ideal candidate possesses hands-on proficiency ...

  • Talascend

    Calibration Engineer

    1 week ago

    Talascend New York, United States

    A Talascend client is in search of a Calibration Engineer with experience in emissions and On-Board Diagnostics (OBD) to join their team. This is a hybrid role, with on-site work based at our clients facility in Dearborn, MI. · The ideal candidate possesses hands-on proficiency ...

  • Satyam Venture Engineering Services

    Calibration Engineer

    3 weeks ago

    Satyam Venture Engineering Services New York, United States

    Technical skills: Knowledge of Automatic Control Systems theory and Embedded Real-Time Control Systems. · Work with specialized software for engine and vehicle calibration. · Work with engines or vehicles in various physical test environments (in car, on dyno, at various altitude ...

  • ALTEN Technology USA

    Calibration Engineer

    2 weeks ago

    ALTEN Technology USA New York, United States

    We're ALTEN Technology USA, an engineering company that provides solutions for engineering, technology, and product development projects. For decades, we've been helping our clients develop products that are changing the world, from the efficient heavy truck of tomorrow to a full ...

  • Detroit Engineered Products

    Engine/Vehicle Calibration Engineer

    3 weeks ago

    Detroit Engineered Products New York, United States

    Calibrator Profile - Requested technical skills: · Knowledge of Automatic Control Systems theory and Embedded Real-Time Control Systems · • Work with specialized software for engine and vehicle calibration · • Work with engines or vehicles in a variety of physical test environme ...

  • Detroit Engineered Products

    Driveability/Emission/Calibration Engineer

    3 weeks ago

    Detroit Engineered Products New York, United States

    o Emission Requirements – All applicable regulatory requirements plus: § 70% of Emission Standards with Full Useful Life (FUL) Components · § Steady State Emission Performance with FUL components · • 70% of customer-defined targets 2.1 g/m CO, 0.05 g/m NOx · • Steady State Speed ...

  • Detroit Engineered Products

    Gasoline Engine emissions and drivability calibration Engineer

    2 weeks ago

    Detroit Engineered Products New York, United States

    Gasoline Engine emissions and drivability calibration · The primary scope of this work involves the development of engine calibration data sets for fuel control, air handling, spark timing and cold start emissions reduction, for a four-cylinder gasoline engine. · Supplements · ...

  • Net2source

    OBD Calibration Engineer

    1 week ago

    Net2source Bloomfield, United States

    Net2Source Inc. is an award-winning total workforce solutions company recognized by Staffing Industry Analysts for our accelerated growth of 300% in the last 3 years with over 5500+ employees globally, with over 30+ locations in the US and global operations in 32 countries. We be ...

  • Novartis AG

    Maintenance & Calibration Engineer

    3 weeks ago

    Novartis AG Millburn, United States

    About the Role · Location: Onsite - Millburn, NJ. · This is an Open Role, Available for Immediate Job Selection. · At Advanced Accelerator Applications, a Novartis company, we are committed to leading innovation in nuclear medicine and delivering the next generation of targeted r ...

  • PACCAR

    Powertrain Calibration Engineer

    1 week ago

    PACCAR Mount Vernon, United States

    Requisition Summary · We are looking for a BEV Charging Integration Lead within the Powertrain Software and Development team. Specific focus will be leading the development, calibration and in-vehicle verification of Battery Electric Vehicle Charging Systems. The selected individ ...

  • PACCAR

    Powertrain Calibration Integration Engineer

    3 weeks ago

    PACCAR Mount Vernon, United States

    Requisition Summary · We are looking for a driven Powertrain Calibration Integration Engineer for our Powertrain Integration and Performance group. Specific focus will be vehicle powertrain performance of the North American PACCAR chassis. The selected individual will work in a g ...

  • GE HEALTHCARE

    Operations Support Specialist

    3 weeks ago

    GE HEALTHCARE New York, United States

    **Job Description Summary**: · **Responsibilities**: · - Calibration management to meet 100% compliance Lifecycle management of test equipment (EOL, new requirements, service delivery needs) · - Manage the Calibration Vendor activities such as calibration, tagging, initial releas ...

  • RiverTowns Group

    Quantitative Analyst

    2 weeks ago

    RiverTowns Group New York, United States

    MS or PhD in Mathematics, Physics, Engineering or other quantitative areas · - Previous programming experience in C, C++ and R · - Strong interest in behavioral finance · **Role** · - Design, implementation, calibration, maintenance, and documentation of prepayment and credit mod ...

  • Acuren Inspection, Inc.

    Rt Assistant

    2 weeks ago

    Acuren Inspection, Inc. Nederland, United States

    Position Summary: · Acuren is currently recruiting for RT Assistants for fulltime positions at our Nederland,TX operations. · **Responsibilities**: · - Set up and utilize Nondestructive Test equipment · - Assist Radiographers in the calibration of NDT equipment · - Assist Radiogr ...

  • Orion Solutions LLC

    Manufacturing Operator

    2 weeks ago

    Orion Solutions LLC New York, United States

    **Job Title: Manufacturing Operator** · **Job Type: Full-Time,** · **Non-Exempt/Hourly Professional Work Location: Fall River, MA and Central Islip, NY** · **Work Hours: First Shift: 8 AM - 5 PM (may vary based on business needs)** · **Reports To: Facilities Operations Manager** ...

  • JPCL Engineering

    Director Special Inspections and Material Testing

    1 week ago

    JPCL Engineering New York, United States

    **Benefits**: · - 401(k) matching · - Bonus based on performance · - Competitive salary · - Dental insurance · - Employee discounts · - Health insurance · - Paid time off · - Training & development · - Vision insurance · - Wellness resources · **Position Summary**: · **Key Respon ...

  • Covanta

    Electrical & Instrumentation Technician

    3 weeks ago

    Covanta Newark, United States

    Who we are · For more than 40 years, Reworld has been a leader in sustainable waste solutions, providing our customers with innovative solutions that help them achieve carbon-negative outcomes. · Our Vision · Reworld is leading the charge to a carbon-negative future through revol ...

  • Cummins

    Engine Test Lab Test Cell Technician

    3 weeks ago

    Cummins New York, United States

    **Engine Test Lab Test Cell Technician 2nd Shift** · **Pay Range $22.46- $33.69** · Our culture believes in _POWERING YOUR POTENTIAL_. We provide global opportunities to develop your career, make your community a better place and work with today's most innovative thinkers to solv ...

  • NewYork-Presbyterian Hospital

    Technician Biomedical Ii

    1 week ago

    NewYork-Presbyterian Hospital Manhattan, United States

    **Information Technology - Impacting Lives** · **Technical Biomedical II** · This is your opportunity to provide world class technology solutions that will directly impact the quality of a patient's life. At New York Presbyterian Hospital Information Technology is at the forefron ...

  • S&P Global

    Associate, Review

    1 week ago

    S&P Global New York, United States

    **About the Role**: · **Grade Level (for internal use)**: 11 · **Title**: Associate, Review & Validation · **Grade (relevant for internal applicants only)**: 11 · **Location**: New York, NY; Chicago, IL · **Team**: · The Review & Validation team has global responsibility for the ...