- Execute with the help of mechanics, and third party providers the planned and unplanned maintenance activities for all utilities equipment like HVACs and air compressors. Provide effective troubleshooting activities and planning required to maintain, repair, and improve a variety of electrical and mechanical equipment, site buildings, grounds, and utilities/support systems.
- Manage / perform / plan and ensure manufacturing / major laboratory equipment preventive maintenance and calibration according to plan. Monitor work order status, follow up to close open work orders in timely manner into the maintenance tracking software system.
- Ensures timely PM, calibration and break down work order execution. Ensures work orders are closed and returned back to the maintenance. Ensures routine PM and calibration are completed as specified. Maintain manufacturing equipment to perform at optimum performance level to meet production targets. Includes safety, utility and facility systems. Ensuring that systems, infrastructure, and equipment run optimally with minimal downtime.
- Review and provide recommendations to improve PM/calibration work to reduce down time. Improve and develop manufacturing maintenance processes using available data. Review, revise and update SOP's. Establishing different maintenance procedures and protocols related to the facility and equipment.
- Maintain facilities all the time to acceptable level of FDA, OSHA and environmental agency compliance. Assist in maintaining Engineering Documentation up to date to the requirements of FDA, EU, OSHA, etc. Assist in the preparing and maintaining site for any audits. Implements audit report recommendations as applicable.
- Manage procurement of spare parts and equipment in line with established processes, ensuring availability for planned maintenance and unplanned repair. Assist in testing components, fixtures, or fittings.
- Provide support to create, implement change control appropriately and in a timely manner.
- Novartis: e-mail [email protected] or call
- Sandoz: e-mail [email protected] or call:
- Bachelor's Degree with 3+ years relevant experience or Master's Degree with 2+ years relevant experience is required.
- Experience in a regulated environment, in a maintenance/engineering capacity is required
- Must be able to adhere to all applicable procedures, cGMPs, company policies and any other quality or regulatory requirements
- Manage, plan and schedule compliant maintenance of utilities/facilities with in house staff or third-party service providers
- Owner of relevant change controls. Able to collaborate with teams on projects.
-
Calibration Engineer
2 weeks ago
Talascend New York, United StatesA Talascend client is in search of a Calibration Engineer with experience in emissions and On-Board Diagnostics (OBD) to join their team. This is a hybrid role, with on-site work based at our client's facility in Dearborn, MI. · The ideal candidate possesses hands-on proficiency ...
-
Calibration Engineer
1 week ago
Talascend New York, United StatesA Talascend client is in search of a Calibration Engineer with experience in emissions and On-Board Diagnostics (OBD) to join their team. This is a hybrid role, with on-site work based at our clients facility in Dearborn, MI. · The ideal candidate possesses hands-on proficiency ...
-
Calibration Engineer
3 weeks ago
Satyam Venture Engineering Services New York, United StatesTechnical skills: Knowledge of Automatic Control Systems theory and Embedded Real-Time Control Systems. · Work with specialized software for engine and vehicle calibration. · Work with engines or vehicles in various physical test environments (in car, on dyno, at various altitude ...
-
Calibration Engineer
2 weeks ago
ALTEN Technology USA New York, United StatesWe're ALTEN Technology USA, an engineering company that provides solutions for engineering, technology, and product development projects. For decades, we've been helping our clients develop products that are changing the world, from the efficient heavy truck of tomorrow to a full ...
-
OBD Calibration Engineer
1 week ago
Net2source Bloomfield, United StatesNet2Source Inc. is an award-winning total workforce solutions company recognized by Staffing Industry Analysts for our accelerated growth of 300% in the last 3 years with over 5500+ employees globally, with over 30+ locations in the US and global operations in 32 countries. We be ...
-
Powertrain Calibration Engineer
1 week ago
PACCAR Mount Vernon, United StatesRequisition Summary · We are looking for a BEV Charging Integration Lead within the Powertrain Software and Development team. Specific focus will be leading the development, calibration and in-vehicle verification of Battery Electric Vehicle Charging Systems. The selected individ ...
-
Engine/Vehicle Calibration Engineer
3 weeks ago
Detroit Engineered Products New York, United StatesCalibrator Profile - Requested technical skills: · Knowledge of Automatic Control Systems theory and Embedded Real-Time Control Systems · • Work with specialized software for engine and vehicle calibration · • Work with engines or vehicles in a variety of physical test environme ...
-
Powertrain Calibration Integration Engineer
3 weeks ago
PACCAR Mount Vernon, United StatesRequisition Summary · We are looking for a driven Powertrain Calibration Integration Engineer for our Powertrain Integration and Performance group. Specific focus will be vehicle powertrain performance of the North American PACCAR chassis. The selected individual will work in a g ...
-
Safety Diagnostics Calibration Engineer
2 weeks ago
Ztek Consulting New York, United StatesJOB DESCRIPTION: · Below, you will find a complete breakdown of everything required of potential candidates, as well as how to apply Good luck. · """Calibrate the diagnostic to ensure failure mode detection while at the same time minimizes the risk of false pass and false fail. ...
-
Driveability/Emission/Calibration Engineer
3 weeks ago
Detroit Engineered Products New York, United Stateso Emission Requirements – All applicable regulatory requirements plus: § 70% of Emission Standards with Full Useful Life (FUL) Components · § Steady State Emission Performance with FUL components · • 70% of customer-defined targets 2.1 g/m CO, 0.05 g/m NOx · • Steady State Speed ...
-
Novartis Millburn, United States**Summary**: · The Maintenance & Calibration Technician performs all maintenance functions on production and facilities equipment and calibration activities on process /facilities equipment. · **About the Role**: · At Advanced Accelerator Applications, a Novartis company, we are ...
-
Engineering Maintenance
1 week ago
Novartis Millburn, United States**Summary**: · The Engineering Maintenance & CMMS Lead is responsible for leading a team to select and maintain all facility and manufacturing equipment, systems, and processes while ensuring the highest standards of workplace safety and product quality; provides broad technical ...
-
Detroit Engineered Products New York, United StatesGasoline Engine emissions and drivability calibration · The primary scope of this work involves the development of engine calibration data sets for fuel control, air handling, spark timing and cold start emissions reduction, for a four-cylinder gasoline engine. · Supplements · ...
-
Phillips 66 Linden, United StatesPhillips 66 & YOU - Together we can fuel the future · The Measurement & Loss Control Specialist - Bayway Refinery will lead the Phillips 66 Loss Control (LC) program for the Phillips 66 Bayway Refinery and associated terminals. The role works closely with Refining/Terminal staff, ...
-
Quality Technician
3 weeks ago
Diageo Plainfield, United StatesJob Description: · - Context/Scope: · - The Quality Team is responsible for supporting the Production Team in ensuring that Diageo's products are produced in compliance with TTB and Company regulations, and that these products meet the expectations of our discerning consumer base ...
-
Measurement technician
2 days ago
Aurora Innovations Linden, United StatesYour tasks · You independently carry out emission measurements, functional tests and calibrations on various industrial plants and ensure a reliable processing of orders together with your team · You perform hazardous substance measurements and indoor air measurements in the work ...
-
Test Technician
1 week ago
EKS Solutions Plainfield, United States**Benefits**: · - Competitive salary · - Opportunity for advancement · - Training & development · **Responsibilities**: · - Conduct tests on products using testing equipment according to established procedures. · - Record test results accurately and maintain detailed documentatio ...
-
Technical Product Manager
3 days ago
Merck Sharp & Dohme Rahway, United StatesWe are looking for an energetic, self-starter to join our Enterprise Information Technology team to help us identify and deliver digital and technology solutions that drive business outcomes for the Ethics & Compliance Office (ECO or the "Business") in areas such as Antibribery & ...
-
Technical Product Manager
3 days ago
Merck Sharp & Dohme Rahway, United StatesWe are looking for an energetic, self-starter to join our Enterprise Information Technology team to help us identify and deliver digital and technology solutions that drive business outcomes for the Ethics & Compliance Office (ECO or the "Business") in areas such as Privacy and P ...
-
Engineering Technician D
2 weeks ago
L3Harris Technologies Clifton, United States**Job Title: Engineering Technician (Lab Custodian)** · **Job Code: 11129** · **Job **Location**: Clifton, NJ** · **Job **Description**: · **L3Harris is looking for a lab custodian to support a high-performance engineering team by managing laboratory space and equipment. Interfac ...
Maintenance & Calibration Engineer - Millburn, United States - Novartis AG
Description
About the RoleLocation:
Onsite - Millburn, NJ.
This is an Open Role, Available for Immediate Job Selection.
At Advanced Accelerator Applications, a Novartis company, we are committed to leading innovation in nuclear medicine and delivering the next generation of targeted radioligand therapy to cancer patients.
The Maintenance and Calibration Engineer will lead maintenance, calibration and continuous improvement activities for the Millburn manufacturing and major laboratory equipment, utilities and facilities to establish consistent production output while keeping down-time to a minimum and improving reliability over time.
Key Responsibilities:
We are Equal Opportunity Employers and take pride in maintaining a diverse environment.
We do not discriminate in recruitment, hiring, training, promotion or other employment practices for reasons of race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, marital or veteran status, disability, or any other legally protected status.
We are committed to building diverse teams, representative of the patients and communities we serve, and we strive to create an inclusive workplace that cultivates bold innovation through collaboration and empowers our people to unleash their full potential.
Accessibility and Reasonable Accommodations:
Individuals in need of a reasonable accommodation due to a medical condition or disability for any part of the application process, or to perform the essential functions of a position, please let us know the nature of your request, your contact information and the job requisition number in your message:
You are applying to be part of the Novartis Talent Pool. We are not currently recruiting for this role but we are building a pipeline for future opportunities. If you would like to be considered for a similar position in future, then please submit your CV.
Role Requirements
OSHA, DEA, FDA, EMEA, ANVISA, HS&E, etc.)
Pay transparency statement:
The pay range for this position at commencement of employment is expected to be between $92,800 and $139,200 a year; however, while salary ranges are effective from 1/1/24 through 12/31/24 fluctuations in the job market may necessitate adjustments to pay ranges during this period.
Further, final pay determinations will depend on various factors, including, but not limited to geographical location, experience level, knowledge, skills and abilities.
The total compensation package for this position may also include other elements, including a sign-on bonus, restricted stock units, and discretionary awards in addition to a full range of medical, financial, and/or other benefits (including 401(k) eligibility and various paid time off benefits, such as vacation, sick time, and parental leave), dependent on the position offered.
Details of participation in these benefit plans will be provided if an employee receives an offer of employment.If hired, employee will be in an "at-will position" and the Company reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, Company or individual department/team performance, and market factors.
You can find everything you need to know about our benefits and rewards in the Novartis Life Handbook. Novartis Life Culture, benefits and rewards handbookWhy Novartis:
Helping people with disease and their families takes more than innovative science. It takes a community of smart, passionate people like you. Collaborating, supporting and inspiring each other. Combining to achieve breakthroughs that change patients' lives. Ready to create a brighter future together?
