Jobs

    Senior Process Engineer - Texas, United States - Salt Creek Midstream

    Salt Creek Midstream
    Salt Creek Midstream Texas, United States

    3 weeks ago

    Default job background
    Description

    GENERAL SUMMARY

    Directly responsible for providing technical support to SCM's Gas, Crude and Water Operations for assets which include processing plants, compressor stations, pump stations, crude terminals, treating facilities, measurement facilities, SWD's and gathering systems. Key areas of support include, but are not limited to, process modeling, flow assurance, equipment design, facility throughput optimization, performance monitoring, chemical program evaluation, regulatory compliance, OPEX reduction, equipment failure & incident evaluations and commissioning support.

    GOALS / OBJECTIVES

     Maximize system and facility throughput to achieve SCM and customer production goals

     Ensure SCM assets meet or exceed required performance requirements and downstream shipper quality specifications

     Optimize OPEX cost efficiency through continual improvement to SCM's asset performance and operational processes

     Ensure in-service assets are in compliance with all Regulatory, Environmental, Health & Safety, and SCM's ESG requirements

    ROLES AND RESPONSIBILITIES

    The following is representative of the responsibilities that may be required of the Sr. Process Engineer.


    • Field visits to SCM assets in West Texas to assist field operations in identifying, evaluating, and troubleshooting operational issues as required.


    • Maintain system flow assurance models and facility process simulation models to ensure efficient operability, maximum production throughput and achieve target product recoveries.


    • Perform mass & material balances to support emissions reporting, assist in rectifying measurement imbalances, estimate system contaminant concentrations, etc.


    • Evaluate key gas processing systems (e.g. TEG, Amine, Cryo, stabilization, compression) to troubleshoot reliability and runtime issues and/or implement performance improvement initiatives.


    • Work with Operations to identify, evaluate. and implement OPEX reduction opportunities.


    • Review and evaluate control system device and gas/crude quality measurement device suitability and performance.


    • Evaluate and mitigate process equipment and control system failures; participate in RCA's.


    • Evaluate customer gas/crude spec analyses to assess potential negative impacts on system integrity and spec variance outside of acceptable downstream shipper requirements.


    • Review customer chemical programs and evaluate impacts to SCM's pipeline system, facilities and operations.


    • Collaborate with field operations to identify and implement process and procedural improvements.


    • Develop and maintain operations KPI's and metrics as required.


    • Directly manage small OPEX projects as required; Define scope, preliminary budget and schedule for evaluation on large OPEX projects for handover to Project Execution Team.


    • Provide engineering representation in pertinent company meetings.


    • Facilitate MOCs, risk assessments, HAZOPs/HAZIDs, and PHAs for modifications to existing assets


    • Participate in Capital Project design/model reviews, risk assessments, HAZOPS/HAZIDS, PHA's, and development plan reviews as required.


    • Provide feedback on Operations lessons learned and operational improvement to the Capital Projects team for implementation into design standards and specifications.


    • Provide commissioning and startup support for Capital Projects if required.

    MINIMUM REQUIREMENTS


    • B.S. in Chemical Engineering.


    • Minimum 15 years of experience in the oil & gas industry with specific experience in Midstream gas gathering and processing


    • Travel to West Texas as required


    • Based in Houston, Texas


    • Direct employment with E&P or Midstream companies preferred


    • Process simulation experience using Promax and Hysys or other similar software packages


    • Proficient in working with P&IDs, PFDs, equipment specification sheets, and other documents pertinent to engineering support for Midstream systems.


    • Ability to establish, maintain positive working relationships with external and internal stakeholders


    • Strong organizational, decision-making, time management, and written/verbal communication skills


    • Motivated self-starter with the ability to work without daily oversight


    • Knowledge of industry codes and standards related to Midstream asset design and operation


  • Flexicrew Technical Services

    Process Engineer

    1 week ago


    Flexicrew Technical Services Texas, United States

    The Process Engineer will help with the scope of the projects before transitioning to working with additional engineering support as we move into FEED and then detail engineering. · PRIMARY RESPONSIBILITIES: · Key Areas of Responsibility will include: · Lead in the promotion of ...

  • CTS Complete Technical Services

    Process Engineer

    2 weeks ago


    CTS Complete Technical Services Texas, United States

    Process Engineer · (*NO 3rd party or C2C inquiries*) · Positions available in Houston, Nederland, and Mount Belvieu, Texas · Description: · Scopes of work may range from feasibility studies to FEED and detailed engineering. Candidate's experience may be in process units (refiner ...

  • CTS Complete Technical Services

    Process Engineer

    3 weeks ago


    CTS Complete Technical Services Texas, United States

    Position · Process Designer · Position Type · Temp to Perm · Position Location · Beaumont · Description From Client · Process Engineer Degree · Project Background is a plus. · 5- 10 years' experience preparing Scoping and FEED documents for Capital Projects (all disciplines) (ty ...


  • Southern Recruiting Solutions, Inc. Texas, United States

    Responsibilities: · The PSM Engineer will conduct process hazard analyses (PHA), including HAZOP, What-If, and other relevant methodologies, to identify and evaluate potential hazards associated with chemical processes. · Develop and maintain process safety management (PSM) progr ...


  • NES Fircroft Texas, United States

    Bachelor's degree in chemical Engineer or related discipline. · 7+ years of experience in Energy or LNG Industry Operations Support. · LNG / Renewables Facility Commissioning, Start-up and Operations Support experience. · Proficient in Process Engineering principles/techniques. U ...


  • Ambs Chemical Search LLC Texas, United States

    DCS/APC Opportunity at a large, top quartile refinery in the Beaumont/Port Arthur Area. Honeywell and DMC. This site has plenty of capital and is very well funded. They offer a good base salary plus a profit share. 9/80 schedule. Full relocation, 401k, and pension. · B.S. Chemica ...


  • RemX | The Workforce Experts Texas, United States

    RemX is seeking an Process Engineer with experience in the Construction Materials Industry to work with our client in the Katy, TX area. Direct Hire Opportunity Get in on the ground floor of a company that is gearing up for MASSIVE growth · The ideal candidate will have 5+ years' ...


  • NESC Staffing Texas, United States Temp

    · We need chemical engineers with experience in the production of trioxane and dioxolane. Both are raw materials in the past production of polyacetal. · Additionally, we are looking for chemical engineers with experience in production of producing polyacetal itself. Specificall ...


  • Wonik IPS Texas, United States

    [원익IPS 반도체 전공정 증착장비 공정개발 엔지니어 인재풀 공고] · *Semiconductor Equipment Process Engineer Talent Resource Pool · [About Wonk IPS] · Linked In - · Youtube - 원익 Recruit - YouTube · 원익IPS는 반도체/Display 공정 중 증착공정과 열처리 장비의 핵심 기술을 보유한 기업으로 국내 증착 장비사로 가장 큰 규모의 사업을 영위하고 있으며, 총 재직자의 60%가 연구원인 연구중 ...


  • Ambs Chemical Search LLC Texas, United States

    Ambs Chemical Search is a trusted recruiting agency that has served the Petrochemical and Refining Industry for over 25 years. · We have a long term relationship with a large refining organization in the Beaumont/Port Arthur that is actively seeking chemical engineers with a bac ...

  • CTS Complete Technical Services

    Process Engineer

    2 weeks ago


    CTS Complete Technical Services Texas, United States

    This position will provide process engineering support to the following assets: · NGL Fractionation Plants with a combined capacity over 1.15 million bbl/d · million barrels of underground storage capacity · NGL export facility with over 500k bbl/d export capacity · Primary Respo ...

  • Plastic Executive Recruiters

    Process Engineer

    3 weeks ago


    Plastic Executive Recruiters Texas, United States

    Regional Search - Role is closer to Austin · PROCESS ENGINEER - EXTRUSION · SUMMARY: Our client is a growing and profitable manufacturer. In this role, you will · work on a wide variety of process engineering products, including new product and material · trials, setting up full ...

  • Affinity Management Group

    Process Engineer

    2 weeks ago


    Affinity Management Group Texas, United States

    EXCITING DIRECT HIRE OPPORTUNITY · Our Client, an EPC company in Houston, has an immediate need for a Process Engineer. In this role you will perform process engineering assignments associated with designing equipment, components, structures or systems for downstream projects (pe ...

  • Lead Dog Recruiting

    RNG Process Engineer

    2 weeks ago


    Lead Dog Recruiting Texas, United States

    NOTE: YOU MUST LIVE IN THE CENTRAL US FOR THIS ROLE. · You will will from home ~50% of the time and travel to RNG biodigester sites across central US the other 50%. · Lead Dog Recruiting is assisting a client with a search for a RNG Process Engineer. This role will be a work from ...

  • Aramis Search

    Engineering Manager

    4 weeks ago


    Aramis Search Texas, United States

    This global plastics business is a talented and experienced Engineering Manager to lead an engineering team in a fast-paced plastics manufacturing environment. The Engineering Manager will be responsible for overseeing all engineering activities, including process optimization, p ...


  • National Register USA Texas, United States

    US Based Manufacturer · COMPENSATION: Salary plus bonus · Excellent, full benefit package with 401K · TO QUALIFY: Seeking a BSME or BSIE and at least three years in a metals manufacturing environment. Roll formers and/or stamping presses experiences highly desired. · Our client i ...


  • Lockheed Martin Texas, United States

    Job Description · This opportunity is within the F-35 Chief Engineer's organization; the position fulfills an International Chief Engineer role for an F-35 international country/customer(s). · The International Chief Engineer is the technical focal point for the air system and w ...


  • Strategic Human Capital llc Texas, United States

    Position Summary: A leading global chemical company is looking for an experienced IE Maintenance Engineer for its petrochemical production facility. The IE Maintenance Engineer plays a crucial role in maintaining and improving the safety and reliability of electrical distribution ...


  • Metric Geo Texas, United States

    About the company: Metric is partnered with a leading Oil and Gas company committed to innovation and excellence. They pride themselves on delivering top-tier solutions and services to clients, fostering a dynamic and collaborative work environment. · About the role: As a Senior ...

  • X4 Group

    Project Engineer

    5 days ago


    X4 Group Texas, United States

    Job Title: Project Engineer - Gas Processing & Compression · Location: Houston, TX (Hybrid Schedule) · A leading player in the oil & gas midstream sector, committed to innovation, safety, and efficiency in our operations. Specializing in the processing and packaging of gas and th ...