- Reviews and responds to department cost of defects (COD) data on a daily, weekly, and quarterly basis.
- Updates and reviews control charts, control limits, and process control cookbooks.
- Updates, reviews and controls SPC charts.
- Monitors and controls incoming raw materials, purchase specifications, as well as audit plans andreports.
- Reviews, monitors and controls process tools. (Machines, racks, tanks, spec. tools.)
- Collects, processes, mines, and interprets data and implements improvements based on analysis.
- Writes work instructions, procedures and techniques.
- Designs and oversees process experiments to determine the causes of defects and identify betterprocess methods and raw materials.
- Improves measurements and capabilities for raw materials, input variables, process yields, and response variable using statistical process control (SPC) and never ending improvement (NEI) methods. Focuses on key department metrics such as scrap, rework, and process yield.
- Improves the use and integration of SPC tools and techniques to improve process predictability.
- Conducts gauge repeatability and reproducibility studies to correct gauge error greater than 30%.
- Discusses and improves design issues, procedures, and techniques with departmental supervisor andproduct engineer.
- Reviews and controls process parameters.
- Reviews part set-ups/gating designs and works with product engineers to eliminate variability.
- Identifies and addresses safety considerations within the scope of the job/area responsibilities.
- Specifies and justifies major equipment purchases and building modifications.
- Bachelor's Degree in Engineering or 5 years of training or experience.
- Able to work in a production environment.
- Able to read and comprehend English.
- Able to work with mathematical concepts such as probability and statistical inference, and plane and solid geometry and trigonometry. Able to apply concepts of fractions, percentages, ratios and proportions to practical solutions.
- Able to communicate effectively with co-workers and customers.
- Able to effectively present information to management and customers.
- Able to define problems, collect data, establish facts, and draw valid conclusions. Able to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
- Able to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
- Able to write reports, business correspondence, and procedure manuals.
- Vision expectation is Jaeger J1 in one eye, at no less than 12 inches; or equivalent, or Jaeger J2 in one eye, at no less than 16 inches.
- Able to use Microsoft Office applications.
- Complies with company and departmental policies and procedures, including company's attendance policy.
- Solid Modeling experience.
- Broad knowledge of mechanical, industrial, and materials science engineering along with investment casting technology.
-
Process Engineer
2 weeks ago
Precision Castparts Corp Ogden, United StatesResponsible for determining operations to produce product and develop processes to ensure quality, increase productivity, and reduce cycle time and scrap.Principle Duties and Responsibilities: Process ControlReviews and responds to department cost of defects (COD) data on a daily ...
-
Process Engineer
1 week ago
Precision Castparts Corp Ogden, United StatesCountry · United States of America · State / County · Utah · City · Ogden · Division · Structurals · Company · Ogden · Function · Engineering · Workplace Type · On-Site · Position type · Full Time · Opportunity ID · 13274 · Company Profile · With more than 120 operations and appr ...
-
Process Engineer
1 week ago
Precision Castparts Corp Ogden, United StatesResponsible for determining operations to produce product and develop processes to ensure quality, increase productivity, and reduce cycle time and scrap. · Principle Duties and Responsibilities: · Process Control · Reviews and responds to department cost of defects (COD) dat ...
-
Process Engineer
2 days ago
Precision Castparts Corp Ogden, United StatesProcess Engineer · Country · United States of America · State / County · Utah · City · Ogden · Division · Structurals · Company · Ogden · Function · Engineering · Workplace Type · On-Site · Position type · Full Time · Opportunity ID · 13274 · Company Profile · ...
-
Process Engineer
4 days ago
Precision Castparts Corp Ogden, United StatesCountry · United States of America · State / County · Utah · City · Ogden · Division · Structurals · Company · Ogden · Function · Engineering · Workplace Type · On-Site · Position type · Full Time · Opportunity ID · 13352 · Company Profile · With more than 120 operations and appr ...
-
Metallurgist Process Engineering Manager
3 weeks ago
Your Talent Source, LLC Ogden, United StatesMetallurgist Process Engineering Manager · Our client is looking for a Process Engineering Manager for their heavy industry operation in the greater Ogden, UT area, with metal experience. · Experience Requirements: · BS degree in Mechanical Engineering (Metallurgical, Material Sc ...
-
Fabrication Process Engineering Manager
2 weeks ago
Westinghouse Electric Company Ogden, United StatesAre you interested in being part of an innovative team that supports Westinghouse's mission to provide clean energy solutions? At Westinghouse, we recognize that our employees are our most valuable asset and we seek to identify, attract and recruit the most qualified talent while ...
-
Metallurgic Process Engineering Manager
5 days ago
Your Talent Source LLC Ogden, United StatesMetallurgic Process Engineering Manager · Our client is looking for a Metal/Forging Process Engineering Manager for their heavy industry operation in the greater Ogden, UT area. · Experience Requirements: · BS degree in Mechanical Engineering (Metallurgical, Material Science & ...
-
Metallurgist Process Engineering Manager
3 weeks ago
Your Talent Source, LLC Ogden, United StatesMetallurgist Process Engineering Manager · Our client is looking for a Process Engineering Manager for their heavy industry operation in the greater Ogden, UT area, with metal experience. · Experience Requirements: · BS degree in Mechanical Engineering (Metallurgical, Material S ...
-
Manufacturing/Process Engineer
2 weeks ago
ES3 Clearfield, United StatesJob Description · Job Description · GENERAL SUMMARY · : · ES3 is currently recruiting a Manufacturing and Process Engineer to support our Manufacturing and Special Processes at our Materials Research and Development Center (MRDC) located in Clearfield, Utah. The accepted cand ...
-
Manufacturing/Process Engineer
2 weeks ago
Engineering and Software System Solutions Clearfield, United StatesIf you are interested in being considered for or learning more about the following employment opportunities, please follow the specific instructions for submitting resumes and other material. Should you be unable to utilize our online applicant tracking system, ES3 ensures that y ...
-
SilverLinx North Ogden, United StatesAre you passionate about technology and full of ideas to move the world forward? Then an apprenticeship or dual studies at Schaeffler is just right for you. Without our products, cars couldn't drive, machines couldn't run, and planes couldn't fly. As a leading provider of rolling ...
-
Crimson Enterprises Ogden, United StatesAbout the Company · We are a growing IT business consulting company with core expertise in the future market of Industry 4.0/Digital Factory. Our focus is on further developing the integration and networking of customers to implement the concept of the Digital Factory. With regar ...
-
Team Leader SAP Logistics
2 weeks ago
Apex Dynamics Marriott-Slaterville, United StatesAbout Intecio GmbH: · In today's modern globalized economy, processes and supply chains are becoming increasingly complex and digital. The associated innovations and flood of data present companies with an opportunity to take advantage of the benefits of the digital age - we hel ...
-
Northrop Grumman Roy, United StatesAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advanc ...
-
Northrop Grumman Roy, United StatesRequisition ID: R · Category: Engineering · Location: Roy, Utah, United States of America · Clearance Type: Secret · Telecommute: No- Teleworking not available for this position · Shift: 1st Shift (United States of America) · Travel Required: Yes, 25% of the Time · Relocation A ...
-
Northrop Grumman Roy, United StatesSentinel (GBSD) – Senior Staff Metals & Corrosion Material Process Engineer (PMP/SpecDesign · Requisition ID: · R · Location: · Roy, Utah, United States of America · Clearance Type: · Secret · Telecommute: · No- Teleworking not available for this position · Shift: · 1st Sh ...
-
Northrop Grumman Roy, UT, United StatesCategory: Engineering · Shift: 1st Shift (United States of America) · Travel Required: Yes, 25% of the Time · Relocation Assistance: Relocation assistance may be available · At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that ...
-
Senior Process Improvement Specialist
4 weeks ago
BlueWave Solutions Clinton, UT, United States FreelanceRakuten Symphony, a Rakuten Group company based in Clinton, UT, provides global B2B services for the mobile telecommunications industry. Our cloud-based platform enables next-generation international mobile services, building on the technology used to launch Japan's newest mobile ...
-
Box Elder Manufacturing Process Engineer
1 week ago
Procter & Gamble Bear River City, United States Full timeJob LocationBear River CityJob Description***This requisition is intended for those that have successfully completed an internship/co-op session the summer of 2023.***Job Qualifications***This requisition is intended for those that have successfully completed an internship/co-op ...
Process Engineer - Ogden, United States - Precision Castparts Corp
Description
CountryUnited States of America
State / County
Utah
City
Ogden
Division
Structurals
Company
Ogden
Function
Engineering
Workplace Type
On-Site
Position type
Full Time
Opportunity ID
12509
Company ProfileWith more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.
PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.
In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.
Job DescriptionResponsible for determining operations to produce product and develop processes to ensure quality, increase productivity, and reduce cycle time and scrap.
Principle Duties and Responsibilities:
Process Control
Reduce Variability (Continuous Improvement)
Minimum Job Requirements:
Desired Competencies:
The above statements are intended to describe the general nature and revel of work being performed. They are not intended to be an exhaustive list of all duties, responsibilities, and skills.
Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or other status protected by applicable law.
This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.
