- Perform safe and efficient operation of the boiler, gas & steam turbine generators, related auxiliaries, and balance of plant systems from outside the control room.
- Perform start-up, operation, and shutdown of plant equipment and systems in accordance with approved plant procedures and as directed by the Control Room Operator. Respond to abnormal situations from outside the control room
- Monitor and record local operating parameters and adjust to maintain safe and efficient operation.
- Provide periodic reports to the Control Room Operator regarding plant status.
- Upon detecting faulty equipment operation, report the situation to the Control Room Operator and assist in diagnosing the cause.
- As directed, take proper action to restore the equipment and plant to a safe condition.
- Monitor plant air and water emissions equipment from outside the control room and take steps to maintain within acceptable limits.
- Immediately notify Control Room Operator of abnormal situations.
- Obtain water sampling from plant sources and perform basic water chemistry analysis such as pH, conductivity, and other constituents related to the monitoring requirements of the facility.
- Observe basic laboratory safety and chemical handling techniques to ensure safety.
- Observe, report, troubleshoot, and correct situations that are likely to develop into operational problems or safety hazards.
- Safely handle hazardous chemicals and execute chemical transfer operations. Report and respond to chemical spills and leaks in accordance with plant emergency response plans.
- Monitor and operate electrical circuit breakers and switches as directed by the Control Room Operator for safe and efficient operation of the plant. This includes opening, locking, and tagging for isolation and maintenance.
- Obtain thorough turnover from O&M Technician being relieved, including special orders and unusual operating conditions. Review operating logs and inspect plant equipment, controls, and indications in accordance with plant lockout/tagout procedures.
- As directed by the Control Room Operator, perform periodic reliability tests on critical plant systems and equipment including lube oil pumps, turbine valves, turbine system trips, and boiler trips.
- Test and operate plant fire and chemical safety equipment as directed.
- Perform periodic preventative maintenance on plant equipment. Support plant maintenance technicians as necessary to complete corrective maintenance activities.
- Maintain work area in a clean, orderly condition. Perform housekeeping activities in the plant on a routine basis to ensure cleanliness, including building areas.
- Periodically supervise vendors conducting work on the plant site and report status of activities to the Control Room Operator.
- Participate in, and sometime lead, scheduled safety meetings and training.
- Perform minor maintenance as directed during scheduled and unscheduled maintenance periods.
- Maintain a valid Driver's License and obtain certification on plant mobile equipment. Safely operate vehicles and diligently observe safe work practices when operating vehicles and mobile equipment.
- Perform other duties as assigned by the Control Room Operator.
- Thorough knowledge of equipment isolation and tagging procedures.
- Thorough knowledge of the location, purpose, and proper use of the plant safety equipment.
- Excellent problem-solving skills to identify, analyze, and recommend solutions.
- Excellent communication, leadership, motivational and teamwork skills required.
- Solid organizational and administrative skills.
- Willing and available for emergency call-in work outside of normal working hours as conditions dictate.
- Experience responding to plant abnormal situations, alarms, and emergencies.
- Experience aligning, switching, isolating, and paralleling electrical equipment and systems under the direction of the Control Room Operator.
- Experience using basic hand tools and performing basic plant maintenance.
- Experience reading, interpreting, and using plant Process & Instrument Diagrams during daily routines.
- Working in varied outdoor environments such as all-weather conditions, all noise levels, hazardous conditions, and on the full range of outdoor work surfaces.
- The frequent use of protective equipment (i.e., hard hats, safety glasses, air masks, ear protection, chemical suits, hot gloves, and high voltage protective equipment, etc.) may be required. Work with hazardous materials may also be required.
- Working in proximity to high voltages and current with proper training and equipment, operating heavy equipment and rolling stock and entering confined spaces or hazardous environments may be required while often being exposed to equipment and machinery noises.
- Duties require walking, standing for extended periods of time, crawling, stooping, sitting, climbing vertical and inclined ladders and stairs, operation of large valves and other tasks requiring up to
- 100 lbs. of pulling or turning force and lifting and carrying up to 50 lbs. Exposure to extreme heat and cold.
- Eye and hand coordination are required to operate switches, pushbuttons, and other controls.
- Specific vision abilities include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust and focus.
- High school diploma or GED.
- 3+ years of Operations and Maintenance experience in a power plant setting
-
Spectrum Solutions South Bend, United StatesAvionics Technician (m/f/d) - Direct Placement · With extensive experience in the German job market, renowned and future-oriented companies have trusted the personnel service of the expertum Group for 30 years. We bring together the ideas and wishes of excellent candidates with t ...
-
Service Technician
2 days ago
Nebula Technologies Granger, United StatesWe are looking for SERVICE TECHNICIANS / REFRIGERATION TECHNICIANS / CLIMATE TECHNICIANS IN THE DATA CENTER (M/F/D) IN MUNICH AD NUMBER: 1784 The hebUP GmbH - Heberger Unternehmensgruppe für Personaldienstleistungen - is your strong partner in the field of recruiting specialized ...
-
Nbf-spt5-ww Superintendent V
3 weeks ago
City of South Bend South Bend, United StatesSalary Range - $63,419-$65,322 annually_ · **JOB SUMMARY**: The role of the Maintenance Planner is to improve work force productivity and work quality by anticipating and eliminating potential delays through planning and coordination of manpower, parts, material, and equipment ac ...
-
Production Technician
1 week ago
Ferguson Enterprises, LLC South Bend, United States**Job Posting**: · Ferguson is North America's leading value-added distributor across residential, non-residential, new construction and repair, maintenance, and improvement (RMI) end markets. Spanning 34,000 suppliers and more than one million customers, we deliver local experti ...
-
Mechatronics Technician
3 weeks ago
Phoenix Innovations Edwardsburg, United StatesAre you fully charged and looking for a new challenge? Then we would like to introduce you to our client, who has many years of experience in the design and manufacture of conveyor technology and automation. We are looking for a full-time mechatronics technician (m/f/d) to join t ...
-
Maintenance Repair I, Ii, Iii, or Iv
2 weeks ago
City of South Bend South Bend, United StatesSalary - $ $23.34 Depending on Qualifiations_ · **JOB SUMMARY**: Participates in the installation, diagnosis, and repair of equipment & structures. The equipment is located at the Wastewater Treatment Plant, lift stations and CSO overflow points in the collection system. · **ESSE ...
-
Municipal yard worker
3 weeks ago
SilverTech Edwardsburg, United StatesThe community of Inning a. Ammersee · (approx. inhabitants), district of Starnberg, · is seeking a · Building Yard Employee (m/f/d) · to join our team as soon as possible. · Your main tasks will include: · Maintenance, upkeep and repair work on municipal properties, roads an ...
-
Bond Clerk
2 weeks ago
St. Joseph County, IN South Bend, United States**POSITION**:Bond Clerk** · **DEPARTMENT**:St. Joseph County Police Dept.** · **WORK SCHEDULE**: 1**0:00am - 6:00pm., M-F** · **JOB CATEGORY**:COMOT (Computer, Office Machine** · **Operation, Technician)** · **DATE WRITTEN**:March 2024** **STATUS**:Full-time** · **DATE REVISED**: ...
-
Training as a mechatronics technician
3 weeks ago
SilverTech Granger, United StatesApprentice Mechatronics Technician (m/f/d) · The INFICON Group - we are experts when it comes to providing leak testing technology and portable gas measurement devices. With more than 1,500 employees worldwide, we contribute our expertise and passion to inspire our customers ever ...
-
Field service technician
3 weeks ago
Quantum Ventures Granger, United StatesWe are looking for new colleagues who live in/around Sassenberg, in the NRW region, or in the greater Augsburg, Nuremberg, or Stuttgart area to start service assignments with our customers as: Field Service Technicians (m/f/d) · Here's what you'll be doing: · Communicating with c ...
-
Assembler Solderer
2 days ago
Radiant Technologies Leeper, United StatesYOUR RESPONSIBILITIES as an Assembler / Solderer (m/f/d) in Emmendingen: * Assembly of cables and wires according to technical specifications * Installation of connectors * Manual assembly of components * Inspection and quality assurance of manufactured cables and wires * Documen ...
-
Nexus Innovations North Bend, United StatesThe large district town of Leutkirch in the Allgäu region (population) is seeking a/an plant technician, specialist for water supply technology, or industrial mechanic (m/f/d) to support the operations team at the municipal utility company, Städtische Wasserversorgung, as soon as ...
-
Medical assistant
2 days ago
Fusion Dynamics North Bend, United StatesWe are a company of the internationally active Octapharma AG / Switzerland. The company group is a market leader in the field of pharmaceuticals from blood plasma with exceptional growth and excellent future prospects. · Who we are · Together with Octapharma Plasma GmbH, we are T ...
-
Mechatronics Technician
3 weeks ago
Stellar Enterprises North Bend, United StatesYour new job as a Mechatronics Technician (m/f) in direct placement · Are you looking to kickstart your career as a Mechatronics Technician (m/f) with a renowned company in the aviation industry through direct placement (no temporary work)? You only have to apply once, we'll take ...
-
Apex Solutions Great Bend, United StatesWe offer attractive pay, personal support, and many other benefits. You can find great testimonials from our employees on kununu. · Employee (m/f/d) Electrical Specialist · Location: Wetter an der Ruhr · "Discover what you're made of" We are looking for an Employee (m/f/d) Electr ...
-
Velocity Solutions Great Bend, United StatesElectronics Technician for Industrial Engineering (m/f/d) · The apprenticeship as an electronics technician for industrial engineering (m/f/d) is both diverse and demanding. Technology and electronics play a major role, but manual dexterity, attention to detail, and patience are ...
-
Chemical technician
2 days ago
Infinity Systems North Bend, United StatesJob Description: · The Indulor Group is a medium-sized family-owned company that has been a specialist in macromolecular chemistry for over 40 years. With production sites in Germany and the USA, as well as sales offices on almost every continent, we operate globally. Our product ...
-
Training as a Technical Product Designer
2 days ago
Quantum Dynamics Great Bend, United StatesAs a technical product designer in the field of mechanical and plant engineering, you will translate the specifications of designers into plans and technical documents. Your main task will be to create technical drawings for the development and modernization of machines, devices, ...
-
Project Manager Building Automation
3 days ago
Blue Horizon Enterprises Ardmore, IN, United States Freelance**Introduction**: · We are looking for your strong support for our branch in Augsburg Join us in our core competency: SAUTER creates living spaces for the future · **Your tasks**: · As a project manager (m/f/d), you will take on independent project management with responsible con ...
-
Industrial mechanic
3 weeks ago
Omega Dynamics East Bend, United StatesIndustrial Mechanic (m/f/d)* · Job ID: 21108Location: HartheimType(s) of employment: Full-time · HeiBa - Where performance and personality have a faceFor over 20 years, we have been THE competent and reliable partner for all areas of personnel services and recruitment in Southern ...
O&M Technician - Niles, United States - PIC Group
Description
At PIC Group, Inc., our emphasis is on excellence. We recruit the strongest candidates in the power generation industry. As a global service provider, we continually seek talented individuals.Title:
Operations & Maintenance (O&M) Technician
Position Type:
Direct Hire
Location:
Niles, Michigan
Reports to:
Control Room Operator
Status:
Non-Exempt
Job Summary:
The Operations & Maintenance (O&M) Technician assists in the proper start-up, operation, and shutdown of the gas turbine, steam turbine generator, HRSG, water treatment, high voltage electrical equipment, and balance of plant equipment from outside the control room.
During the work shift, the Operations & Maintenance (O&M) Technician also tours designated areas in the plant to inspect equipment and record operating parameters.
The Operations & Maintenance (O&M) Technician also performs routine preventative maintenance and periodically works under the direction of the maintenance technicians to support corrective maintenance activities.
The Operations & Maintenance (O&M) Technician reports to and supports the Control Room Operator for PIC Group, Inc.and will provide recommendations and input to the staff in the operation of all plant water systems and setting performance goals for the generation facility.
Essential Duties and Responsibilities:
Job Requirements:
The successful candidate should be able to read and understand corporate programs, policies, procedures, and instructions specific to the O&M Agreement.
Qualifications must include the following:
Physical Requirements:
Education / Experience:
Due to the large number of responses we receive to our postings, only those applicants with the required experience and qualifications will be contacted.
PIC Group is an Equal Opportunity Employer.