Jobs
>
Washington

    Welder - Washington, United States - CB Mining Inc

    CB Mining Inc
    CB Mining Inc Washington, United States

    2 weeks ago

    Default job background
    Description

    Job Duties:
    Experienced welder at our welding and fabrication shop.

    The preferred candidate will have the following skills:
    FCAW solid wire with 85/15 gas; SMAW - all positions; 3G 1" plate with backup bar # /8 certification; carbon-arc ability; cutting torch experience; blueprint reading and layout skills; heavy plate fabrication ability; overhead crane rigging; and a willingness to learn product repair procedures

    Employment weld test consists of:
    Flat- inch plate beveled 45 degrees with 2mm nose
    • Plates are tacked together with 2 mm opening, no backing plate, and open root
    • Weld root pass with heat setting of 19 volts and 200 amps
    • Remainder of weld is set at 28.
    5 volts and 325 ampsVertical
    • Same plate as flat
    • Position vertical run root pass down with settings 19 volts 200 amps
    • Remainder will be welded vertical up with a weave pattern at a setting of 18 volts and 180 amps
    • All welds are checked for full penetration and then cut 2 pieces 1 in wide and bent, face side and root side, checking for breakage
    • Wire 045 solid wire with 85/15 gasRequirements: Proven welding and fabrication experience; ability to read and interpret blueprints, schematics, and drawings; certification is a plus.
    Vocational-technical school and/or secondary level trade school training in welding technology.

    We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

  • CB Mining Inc

    Welder

    1 week ago

    CB Mining Inc Washington, United States

    Job Duties: Experienced welder at our welding and fabrication shop. The preferred candidate will have the following skills: FCAW solid wire with 85/15 gas; SMAW - all positions; 3G 1" plate with backup bar # /8 certification; carbon-arc ability; cutting torch experience; blueprin ...

  • CB Mining

    Welder

    1 week ago

    CB Mining Washington, United States

    Job Description · Job DescriptionJob Duties: Experienced welder at our welding and fabrication shop. The preferred candidate will have the following skills: FCAW solid wire with 85/15 gas; SMAW - all positions; 3G 1" plate with backup bar # /8 certification; carbon-arc ability; c ...

  • Horizon Dynamics

    WIG welder

    1 hour ago

    Horizon Dynamics Belle Vernon, United States

    Hello and welcome to Piening We are currently looking for a long-term WIG welder (m/f/d) for our client in the metal industry in Büren, starting immediately. We are seeking individuals who want to contribute to the success and growth of the company. Here's what you can expect fro ...

  • CB Mining Inc

    Intern-Welder

    2 weeks ago

    CB Mining Inc Washington, United States

    :The successful candidate must be able to confidently and safely weld and perform other duties as assigned.The preferred candidate will have the following skills, or must be willing to take necessary course work and become proficient in the following skills:Welding, air arcing, c ...

  • CB Mining Inc

    Intern-Welder

    1 week ago

    CB Mining Inc Washington, United States

    : · The successful candidate must be able to confidently and safely weld and perform other duties as assigned. · The preferred candidate will have the following skills, or must be willing to take necessary course work and become proficient in the following skills: Welding, air ...

  • Cascade Innovations

    Welder MAG gn

    1 hour ago

    Cascade Innovations Dormont, United States

    We are looking for a welder - plant and apparatus construction (m/f/d) for our location in Rostock, Mecklenburg-Western Pomerania. As part of our team in mechanical and plant engineering, you will be involved in the production and assembly of systems and apparatus. · Your profile ...

  • BlueWave Solutions

    Welder (m/f) TIG/MIG

    1 hour ago

    BlueWave Solutions Allenport, United States

    Not all jobs are created equal. It should fit you, challenge you, and be appropriately compensated. We believe that too, which is why PAMEC connects you with companies that truly fit you. If you love your job, we do ours right - and we've been doing it since 1984. · Ready for a n ...

  • Tradesmen International

    Welder

    5 days ago

    Tradesmen International Bethel Park, United States

    : · Tradesmen International is immediately hiring skilled Flat Welders for projects located in and around New Kesington, PA. This is a first shift opportunity with a pay rate of $20-25/hour based on experience & skill level. If you are a Welder and want to work alongside other p ...

  • Wabtec

    Welder

    2 weeks ago

    Wabtec Duquesne, United States Full time

    Wabtec Corporation is a leading global provider of equipment, systems, digital solutions and value-added services for freight and transit rail. Drawing on nearly four centuries of collective experience across Wabtec, GE Transportation and Faiveley Transport, the company has unmat ...

  • Aerotek

    Welder

    3 days ago

    Aerotek Turtle Creek, United States

    **MIG/Flux core Welders** · **We are seeking structural welders for a manufacturing company located east of Pittsburgh. The candidates will be responsible for the following.** · + Ability to read and interpret shop blueprints/diagrams · + Must pass a 2G and 3G FCAW weld test ...

  • Block Shear LLC

    Welder

    2 weeks ago

    Block Shear LLC Pittsburgh, United States

    Welding position is for a small equipment manufacturing company. · Compensation - Skill-based pay (SBP) · Looking for a honest, self motivated, multi faceted attention to detail fitter/welder for the fabrication and assembly of the Blockshear masonry and stone splitting equipme ...

  • Aerotek

    Welder

    2 days ago

    Aerotek Turtle Creek, United States

    **MIG/Flux core Welders****We are seeking structural welders for a manufacturing company located east of Pittsburgh. The candidates will be responsible for the following.**+ Ability to read and interpret shop blueprints/diagrams+ Must pass a 2G and 3G FCAW weld test+ Perform the ...

  • Thunderbolt Inc

    Welder (m/f/d) Special Machine Construction

    1 hour ago

    Thunderbolt Inc Elco, United States

    Welder (m/f/d) Special Machine Construction · From the industry. For the industry. Our mission is based on our extensive experience in the European job market. Not only for this reason, well-known and future-oriented industrial companies have been relying on the solutions of the ...

  • BuildSubmarines

    Welder

    3 weeks ago

    BuildSubmarines Duquesne, PA, United States

    Wabtec Corporation is a leading global provider of equipment, systems, digital solutions and value-added services for freight and transit rail. Drawing on nearly four centuries of collective experience across Wabtec, GE Transportation and Faiveley Transport, the company has unmat ...

  • Tradesmen International

    Welder

    6 days ago

    Tradesmen International Pittsburgh, United States

    Tradesmen International - JobID: A7E644DF6E0F484DA7EA4C53A9B92938 [Fabricator] As a Welder at Tradesmen International, you'll: Read blueprints and other engineering drawings in order to perform efficiently; Read and interrupt technical manuals as applicable; Demonstrate knowledge ...

  • Aerotek

    Welder

    8 hours ago

    Aerotek Leetsdale, United States

    **********AEROTEK IS HIRING*********Aerotek is currently hiring for a MIG Welder in the Leetsdale area. Candidates with MIG Welding, Fabricating and Blueprint reading experience is preferred.+ MIG welding+ Fabricating+ Blueprint reading+ Ability to use basic hand tools as well as ...

  • Aerotek

    Welder

    21 hours ago

    Aerotek Leetsdale, United States

    Aerotek - JobID: JP [Fabricator] As a Welder at Aerotek, you'll: Require reading blueprints to determine locations and quantities of required materials; Fabricate metal parts such as steel and aluminum frames or beams; Perform other duties as assigned...Hiring Immediately >> ...

  • Blockshear llc

    Welder

    2 weeks ago

    Blockshear llc Pittsburgh, United States

    Welding position is for a small equipment manufacturing company. · Compensation - Skill-based pay (SBP) · Looking for a honest, self motivated, multi faceted attention to detail fitter/welder for the fabrication and assembly of the Blockshear masonry and stone splitting equipmen ...

  • Franjo Construction

    Welder

    1 week ago

    Franjo Construction Homestead, United States

    Job Description · Job DescriptionThe primary focus of the Welder position is to safely fabricate and install as necessary all structural and misc. steel work in accordance with the design documents. This position requires several welding certifications outlined below as well as g ...

  • U.S. Army Corps Of Engineers

    Welder

    2 hours ago

    U.S. Army Corps Of Engineers Pittsburgh, United States Full time

    Perform welder duties using electric, acetylene and/or inert gas shielded welding processes. · Use templates, jigs, blueprints, and other guides to repair, modify or fabricate metal items for all types of equipment. · Make a wide range of welds from simple to precision welding ut ...