Jobs
>
Washington

    Welder - Washington, United States - CB Mining

    CB Mining
    CB Mining Washington, United States

    1 week ago

    Default job background
    Description

    Job Description

    Job Description

    Job Duties:
    Experienced welder at our welding and fabrication shop.

    The preferred candidate will have the following skills:

    FCAW solid wire with 85/15 gas; SMAW - all positions; 3G 1" plate with backup bar # /8 certification; carbon-arc ability; cutting torch experience; blueprint reading and layout skills; heavy plate fabrication ability; overhead crane rigging; and a willingness to learn product repair procedures.


    Employment weld test consists of:
    Flat
    - inch plate beveled 45 degrees with 2mm nose

    • Plates are tacked together with 2 mm opening, no backing plate, and open root
    • Weld root pass with heat setting of 19 volts and 200 amps
    • Remainder of weld is set at 28.5 volts and 325 amps
    Vertical

    • Same plate as flat
    • Position vertical run root pass down with settings 19 volts 200 amps
    • Remainder will be welded vertical up with a weave pattern at a setting of 18 volts and 180 amps
    • All welds are checked for full penetration and then cut 2 pieces 1 in wide and bent, face side and root side, checking for breakage
    • Wire 045 solid wire with 85/15 gas

    Requirements:
    Proven welding and fabrication experience; ability to read and interpret blueprints, schematics, and drawings; certification is a plus. Vocational-technical school and/or secondary level trade school training in welding technology.

    We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.
  • CB Mining Inc

    Welder

    3 days ago

    CB Mining Inc Washington, United States

    Job Duties: Experienced welder at our welding and fabrication shop. The preferred candidate will have the following skills: FCAW solid wire with 85/15 gas; SMAW - all positions; 3G 1" plate with backup bar # /8 certification; carbon-arc ability; cutting torch experience; blueprin ...

  • CB Mining Inc

    Welder

    1 week ago

    CB Mining Inc Washington, United States

    Job Duties: Experienced welder at our welding and fabrication shop. The preferred candidate will have the following skills: FCAW solid wire with 85/15 gas; SMAW - all positions; 3G 1" plate with backup bar # /8 certification; carbon-arc ability; cutting torch experience; blueprin ...

  • Horizon Dynamics

    WIG welder

    1 week ago

    Horizon Dynamics Belle Vernon, United States

    Hello and welcome to Piening We are currently looking for a long-term WIG welder (m/f/d) for our client in the metal industry in Büren, starting immediately. We are seeking individuals who want to contribute to the success and growth of the company. Here's what you can expect fro ...

  • CB Mining Inc

    Intern-Welder

    1 week ago

    CB Mining Inc Washington, United States

    :The successful candidate must be able to confidently and safely weld and perform other duties as assigned.The preferred candidate will have the following skills, or must be willing to take necessary course work and become proficient in the following skills:Welding, air arcing, c ...

  • CB Mining Inc

    Intern-Welder

    2 days ago

    CB Mining Inc Washington, United States

    : · The successful candidate must be able to confidently and safely weld and perform other duties as assigned. · The preferred candidate will have the following skills, or must be willing to take necessary course work and become proficient in the following skills: Welding, air ...

  • Cascade Innovations

    Welder MAG gn

    1 week ago

    Cascade Innovations Dormont, United States

    We are looking for a welder - plant and apparatus construction (m/f/d) for our location in Rostock, Mecklenburg-Western Pomerania. As part of our team in mechanical and plant engineering, you will be involved in the production and assembly of systems and apparatus. · Your profile ...

  • Wabtec

    Welder

    1 week ago

    Wabtec Duquesne, United States Full time

    Wabtec Corporation is a leading global provider of equipment, systems, digital solutions and value-added services for freight and transit rail. Drawing on nearly four centuries of collective experience across Wabtec, GE Transportation and Faiveley Transport, the company has unmat ...

  • BuildSubmarines

    Welder

    1 week ago

    BuildSubmarines Duquesne, PA, United States

    Wabtec Corporation is a leading global provider of equipment, systems, digital solutions and value-added services for freight and transit rail. Drawing on nearly four centuries of collective experience across Wabtec, GE Transportation and Faiveley Transport, the company has unmat ...

  • Block Shear LLC

    Welder

    1 week ago

    Block Shear LLC Pittsburgh, United States

    Welding position is for a small equipment manufacturing company. · Compensation - Skill-based pay (SBP) · Looking for a honest, self motivated, multi faceted attention to detail fitter/welder for the fabrication and assembly of the Blockshear masonry and stone splitting equipme ...

  • Blockshear llc

    Welder

    1 week ago

    Blockshear llc Pittsburgh, United States

    Welding position is for a small equipment manufacturing company. · Compensation - Skill-based pay (SBP) · Looking for a honest, self motivated, multi faceted attention to detail fitter/welder for the fabrication and assembly of the Blockshear masonry and stone splitting equipmen ...

  • Sapphire Solutions

    Mechanic / Pipe fitter / Welder (male/female/diverse)

    1 week ago

    Sapphire Solutions Rayland, United States

    As a strong support for our existing team, SPIE SAG GmbH, a specialist in energy infrastructure in the CityNetworks & Grids division, is looking for you as a · Monteur / Rohrleitungsbauer / Schweißer m/w/d · We offer:Permanent employment in a crisis-proof, growing company with a ...

  • Aerotek

    Welder

    1 week ago

    Aerotek Turtle Creek, United States

    **Description:**Candidate must be able to read and interpret shop blueprints/diagramsCandidates must be able to pass a 2G and 3G FCAW weld testCandidates must be able to perform the Layout, position, align, fit, clamp, hold, tack-weld, heat-bend, grind, or bolt component parts to ...

  • Wolf Pack Rentals LLC

    Welder

    1 week ago

    Wolf Pack Rentals LLC Empire, United States

    Performs welding jobs using electric, acetylene and/or arc-air equipment.Evaluates and coordinates welding needs and repairs as necessary.Prevents damage to machinery, equipment, tools and material.Maintains good housekeeping in the work areas.Complies 100% with PPE requirements ...

  • Department Of The Army

    Welder

    3 days ago

    Department Of The Army Neville Island, United States Full time

    Summary · About the Position: Welder position with the United States Army Engineer District, Huntington Regional Rivers Repair Fleet, Medium Capacity Fleet Unit, duty location at Neville Island, TN. · Duties · Perform welding duties such as pre-heating, brazing and bead welding, ...

  • EAFab Corporation

    Fabrication Welder

    2 days ago

    EAFab Corporation Oakdale, United States

    Job Type · Full-time · Description · Reports To: Assistant Shop Foreman and Shop Foreman · Compensation: Competitive industry salary with bonus opportunities · Summary: Welders at EAFab are responsible for fabricating custom equipment for the steel industry and performing rep ...

  • EAFab Corporation

    Fabrication Welder

    1 week ago

    EAFab Corporation Oakdale, United States

    Job Type Full-timeDescriptionReports To: Assistant Shop Foreman and Shop ForemanCompensation: Competitive industry salary with bonus opportunitiesSummary: Welders at EAFab are responsible for fabricating custom equipment for the steel industry and performing repairs for our clien ...

  • Calgon Carbon Corporation

    Welder I

    2 weeks ago

    Calgon Carbon Corporation Pittsburgh, United States Full time

    Calgon Carbon | A Kuraray Company currently has an opportunity where you can be a part of our growing team as we provide our customers with outstanding products that make the air we breathe and the water we use safe for generations to come. · Position: Welder I · Location: Equip ...

  • Calgon Carbon Corporation

    Welder I

    1 week ago

    Calgon Carbon Corporation Pittsburgh, United States

    Job Description · Calgon Carbon | A Kuraray Company currently has an opportunity where you can be a part of our growing team as we provide our customers with outstanding products that make the air we breathe and the water we use safe for generations to come. · Position: Welder I ...

  • GATE Petroleum Company

    certified welder

    1 week ago

    GATE Petroleum Company Monroeville, United States

    · Job Title: Welder Fabricator Department: Fabrication Shop · Reports to: Greg Oakley Effective Date: 10/13/22 · Job Summary: · Fabricate weld plates for jobsite embeds, productions hardware, jobsite connections, fix hardware, and other weldments as required. Welders are require ...

  • Path Engineering

    MIG Welder

    1 day ago

    Path Engineering Ambridge, United States

    Job Description · Job DescriptionRoleAs a MIG Welder I (also known as Gas Metal Arc Welder, Steel Parts Fabricator), you will join, fabricate, and repair steel parts using specialized welding techniques and equipment. You will interpret blueprints, ensure structural soundness of ...