- Ability to problem solve proficiently.
- Ensure Blow Molding machines, auxiliary equipment, and connected systems are set to parameters, meet quality standards and all production goals.
- Set up and start up molding machines according to established process parameters.
- Work with Launch Team on new project mold design.
- Establish new project mold process parameters by conducting trials.
- Partner with Launch Team/Production to establish proper standard work instruction for post molded product.
- Monitor and troubleshoot processing problems and document process changes.
- Manage machine process efficiency initiatives, scrap minimization, materials conservation.
- Start and shut down machines.
- Troubleshoot and properly countermeasure any problems with the blow mold machines.
- Understand the importance of reducing and re-using material scrap to protect our environment and save costs.
- Possess a positive attitude at all times while exhibiting professionalism and willingness to work as a team for the best solution.
- Identify and request mold repair as needed.
- Enter work orders into maintenance software.
- Coordinate & escalate various maintenance/processing issues in a timely manner.
- Follow escalation policy.
- Maintain a safe and clean work environment, to include but not limited to, overall cleanliness and appearance of the machine and area surrounding machine.
- Perform other activities as required by Manager.
- Coach mold setting Team as needed.
- Coach and discipline Process Techs on daily performance by monitoring tasks performed.
- Perform timecard approvals/schedule vacation accordingly to business needs.
- Monitor training via Paulson Software. Ensure training courses are being taken consistently.
- Monitor and maintain material handling systems.
- Communicate quickly and effectively at all levels of the organization. Experience, Educational and Training Preferences:
- years in a position as a Blow Molding Process Technician or similar role required.
- years' experience using machine controls to input settings and do high level troubleshooting required.
- Experience in an automotive JIT manufacturing environment preferred. Other experience in lieu may be considered on a case by case basis for each of the above
- Bachelor Degree preferred.
- Ability to read, write and speak English . Physical Requirements:
- Ability to stand/walk for up to hours at a time.
- Must be able to lift pounds individually and team lift pounds.
- Be able to work in an environment that is climate controlled but is exposed to potential heat, rain, and cold. External Applicants Must:
- Be willing to meet the physical requirements above and work overtime as needed, sometimes with minimum notice (including some weekends and holidays) to cover responsibilities based on the needs of the business
- Be able to pass a basic eye acuity exam within weeks of hire
- Must be willing to work overtime as needed, including some weekends and holidays
- Be able to meet all above noted expectations in the Job Summary
-
IT Process Engineer
1 week ago
Inherent Technologies San Antonio TX, United States contract· • Acquires and applies advanced knowledge of the business and process engineering discipline. · • Assembles key participants leads guides and facilitates cross functional collaborative teams in business improvement and development initiatives · • Synthesizes analyses identifie ...
-
Process Engineer
1 week ago
Inherent Technologies San Antonio, United States contractPositionProcess Engineer Lean six sigma green belt With Finance documentation Location San Antonio TX Duration 1 Year Phone & Skype Client TCS Interview Immediate Certification in Six Sigma Green Belt or Black Belt. Hands on experience in applying statistical techniques in busine ...
-
Process Engineer
1 week ago
Inherent Technologies San Antonio, United States contractGreetings from Inherent Technologies Hope this email finds you in the best of your health My name is Indra Kumar and I&39;m an IT recruiter at Inherent Technologies. I came across your resume on one of the job boards and wanted to check if you are available for a new role. Look f ...
-
Process Development Engineer
1 day ago
Navistar San Antonio, United StatesPosition Overview: · Navistar is seeking a Process Development Engineer to join our team at our Manufacturing Facility in San Antonio, Texas · The Navistar San Antonio Manufacturing Plant is a benchmark facility that builds leading-edge commercial vehicles to meet the needs of ...
-
Process Development Engineer
4 days ago
Navistar San Antonio, United StatesPosition Overview: · Navistar is seeking a Process Development Engineer to join our team at our Manufacturing Facility in San Antonio, Texas · The Navistar San Antonio Manufacturing Plant is a benchmark facility that builds leading-edge commercial vehicles to meet the needs of ...
-
Process Development Engineer
1 week ago
Navistar San Antonio, United StatesPosition OverviewNavistar is seeking a Process Development Engineer to join our team at our Manufacturing Facility in San Antonio, TexasThe Navistar San Antonio Manufacturing Plant is a benchmark facility that builds leading-edge commercial vehicles to meet the needs of today's - ...
-
CyManII Process Engineer
1 week ago
The University of Texas at San Antonio San Antonio, United States· CyManII Process Engineer · Location: San Antonio, TX · Regular/Temporary: Regular · Job ID: 11677 · Full/Part Time: Full Time · Org Marketing Statement · The University of Texas at San Antonio is a Tier One research university and a Hispanic Serving Institution specializi ...
-
Process Development Engineer
2 weeks ago
Navistar San Antonio, United StatesPosition Overview · Navistar is seeking a Process Development Engineer to join our team at our Manufacturing Facility in San Antonio, Texas · The Navistar San Antonio Manufacturing Plant is a benchmark facility that builds leading-edge commercial vehicles to meet the needs of tod ...
-
Process Engineer-NDT
1 week ago
StandardAero San Antonio, United StatesAs a Process Engineer- NDT you will collaborate with internal Quality Management and Business units, as well as develop and continuously improve our NDT systems. You will combine technical experience and demonstrated success working with organizations inside and outside the compa ...
-
Process Engineer-NDT
2 weeks ago
Standard Aero San Antonio, United States Full timeAs a Process Engineer- NDT you will collaborate with internal Quality Management and Business units, as well as develop and continuously improve our NDT systems. You will combine technical experience and demonstrated success working with organizations inside and outside the compa ...
-
Senior Chemical Process Engineer
1 week ago
Solidia Technologies® San Antonio, United StatesJob DescriptionJob Description · Job Description: Senior Chemical Process Engineer · Summary: · Engineers at Solidia Technologies on the Technology Team work on projects that support the development of Solidia Cement and Concrete into commercially viable applications. Engineer ...
-
Blow Molding Process Engineer
3 days ago
Military Technical Recruiting (MTR) San Antonio, United StatesJob Description · Job DescriptionEnsure Blow Molding machines, auxiliary equipment, and connected systems are set to · parameters, meet quality standards and all production goals. · Set up and start up molding machines according to established process parameters. · Work with Laun ...
-
Blow Molding Process Engineer
6 hours ago
Reyes Automotive Group San Antonio, United StatesJob Description · Job DescriptionDescription:Job Summary: · Ability to problem solve proficiently. · Ensure Blow Molding machines, auxiliary equipment, and connected systems are set to parameters, meet quality standards and all production goals. · Set up and start up molding mach ...
-
Southwest Research Institute San Antonio, United StatesWho We Are: · Carbon Capture and Utilization Process Development Section works to support first of its kind carbon capture and carbon utilization processes. Lab to pilot plant process development services are performed to take new and novel technologies to commercialization. · O ...
-
Blow Mold Process Engineer
1 week ago
PEAK Technical Staffing San Antonio, United States· Job Summary: Ability to problem solve proficiently. · Ensure Blow Molding machines, auxiliary equipment, and connected systems are set to parameters, meet quality standards and all production goals. · Set up and start up molding machines according to established process param ...
-
SWRI San Antonio, United StatesThis position will fill a role in supporting operations for pilot plants for process development and assist in expanding our technical portfolio of offerings to our clients.Increased utilization by supporting existing large projects and conducting business development for existin ...
-
SWRI San Antonio, United StatesThis position will fill a role in supporting operations for pilot plants for process development and assist in expanding our technical portfolio of offerings to our clients. · Increased utilization by supporting existing large projects and conducting business development for exi ...
-
BlueNova Industries Von Ormy, United StatesWe are looking for you to join our team at our Gummersbach location as: · Your responsibilities: · Technical order processing with a focus on overhead cranes · Implementation of regulations and standards such as national and European crane calculation norms, machinery directive, ...
-
StandardAero San Antonio, United StatesBuild an Aviation Career You're Proud OfExplore a career where you're challenged and have access to exciting engineering projects that stretch your talents. You'll design and create new systems and technologies to help solve complex aviation problems. Our expert team and supporti ...
-
DallsAirmotive San Antonio, United StatesBuild an Aviation Career You're Proud Of · Explore a career where you're challenged and have access to exciting engineering projects that stretch your talents. You'll design and create new systems and technologies to help solve complex aviation problems. Our expert team and suppo ...
Blow Mold Process Engineer - San Antonio, United States - PEAK Technical Staffing
Description
P-RDC-Job Summary:
Blow Mold Process Engineer professionals in San Antonio
-
David Ford
Mentor, Coach, Business Process Engineer, TAMUK Honors College Board Member, Member of the 2020 Jave ...
-
curtis rhodes
Senior Network Security Engineer/ISSO
-
giancarlo rodriguez
Director of Operations
-
Nathaniel Euresti
Electrical Engineer
-
David Ogura
What I can offer a company is solid 20 + years of experience in the field of engineering, project ma ...
-
Elizabeth Haynie
Technical Product Manager