Jobs
>
New York City

    Validation Engineer - New York, United States - Glatt Group

    Glatt Group
    Glatt Group New York, United States

    3 weeks ago

    Default job background
    Description
    Job description

    Essential Job Function:

    • Must have the ability to develop validation protocols (IQ and OQ), validation reports, and factory acceptance test documents. As such, good writing and grammar skills and attention to detail are essential.
    • Experience is required in reading and interpreting electric and pneumatic controls, technical design documents, and PLC code.
    • Travel 25 to 35% to customer sites to perform validation testing of Glatt equipment and control systems.
    • Familiarity with industry accepted practices for documenting test results, recording of deviations, and deviation resolutions.
    • Must have excellent communication skills and be comfortable presenting the validation results to our customer's project team (QA, validation, project management, etc.).
    • Must have good troubleshooting skills. Prior experience in control system programming, commissioning, calibration, I/O forcing, PID loop tuning, and/or equipment service is desirable.
    • Must be willing and be capable to climb ladders and to enter restrictive spaces.
    • Must have an understanding of computer system validation including knowledge of GAMP 5 and CFR 21 Part 11.

    General Information:

    • Minimum of a four-year degree in engineering, engineering technology, science or 5 to 7 years of related experience.
    • Must possess a valid driver's license.
    Confined space entry training is required for potential entry into confined spaces within Glatt supplied equipment.

    JOB RESPONSIBILITES INCLUDE BUT NOT LIMITED TO:

    • Primary responsibility is preparation of validation protocols (IQ/OQ) and commissioning documents for Glatt equipment and control systems.
    • Work with Glatt's control system programmers to develop and execute factory acceptance software test documents.
    • Work as an integral member of a project team.
    • Interface with the Glatt equipment manufacturing companies and internal departments to obtain the equipment, controls, and installation support documents necessary for protocol development.
    • Field execution/testing of approved validation protocols (IQ/OQ) and commissioning documents. This will include (but is not limited to) I/O forcing, alarm testing, sequence testing, PLC diagnostics, and PID loop performance testing.
    • Coordinate the efforts of the personnel involved during on-site qualification. This would include the various engineering disciplines from within Glatt and/or personnel from the Glatt equipment manufacturing companies.
    • Specify, obtain, and maintain hardware and software necessary to perform in-house and on-site validation testing.
    • Prepare documents of field visits in a timely and professional manner. This will include field reports, daily labor logs, invoices, and expense reports.
    • Keep current with latest cGMP's, Validation technology and procedures, ISPE guidelines and related FDA publications.
    • Develop, maintain, and enhance positive interpersonal relationships with staff members of the Glatt Group worldwide.
    • Perform other duties as assigned by management.

    Job Type:
    Full-time
  • Cummins

    Product Validation Engineering Technician

    1 week ago

    Cummins New York, United States

    **Product Validation Engineering Technician 1st Shift** · **Pay Range $30.46- $45.69** · Our culture believes in _POWERING YOUR POTENTIAL_. We provide global opportunities to develop your career, make your community a better place and work with today's most innovative thinkers to ...

  • Cummins

    Product Validation Engineering Technician

    2 weeks ago

    Cummins New York, United States

    **Product Validation Engineering Technician · - 1st Shift** · **Pay Range $30.46- $45.69** · Our culture believes in _POWERING YOUR POTENTIAL_. We provide global opportunities to develop your career, make your community a better place and work with today's most innovative thinker ...

  • Cummins

    Product Validation Engineering Technician

    2 days ago

    Cummins New York, United States

    **Product Validation Engineering Technician - System Performance 1st Shift** · **Pay Range $30.46- $45.69** · Our culture believes in _POWERING YOUR POTENTIAL_. We provide global opportunities to develop your career, make your community a better place and work with today's most i ...

  • eTeam

    Validation Engineer

    3 weeks ago

    eTeam New York, United States

    Job Title: Validation Engineer · Location: Athens, GA · Duration: 06 months · Duties: · Perform Smoke studies and assist in semi-annual Media fill qualifications as a SME Perform requalification/periodic review of autoclaves, depyrogenation tunnels, cold rooms, freezers and ware ...

  • Acara Solutions, An Aleron Company

    Validation Engineer

    1 week ago

    Acara Solutions, An Aleron Company New Jersey, United States

    Acara Solutions is seeking a Validation Engineer for its successful client who are a leading world supplier of integrated processing solutions for customers in the area of pharmaceuticals, food processing, feeds and fine chemicals. Our products and services stand for reliability ...

  • Ascendum KPS

    Validation Engineer

    3 weeks ago

    Ascendum KPS New York, United States

    Job description · Improving manufacturing processes using engineering methods (e.g., LEAN methods, basic statistics) for continuous process improvement. · Developing basic experiments and tests (including writing and executing protocols) to qualify and validate manufacturing proc ...

  • HCLTech

    Validation Engineer

    3 weeks ago

    HCLTech New York, United States

    Job Description : · 1) 7 to 9 years of Experience in Software verification and testing activities. · 2) Design, develop, and execute comprehensive test plans, test protocols and test cases for verification and validation of embedded software. · 3) Collaborate with cross-function ...

  • Aequor Inc

    Validation Engineer

    2 weeks ago

    Aequor Inc New York, United States

    Position: Validation Engineer · Location: Summit NJ 07901 · Duration: 6+ months (possibility of extension for the right candidate depending on performance) · Pay rate: $78.66/ hour on W2 · 100% onsite · Highly preferred cell therapy equipment commissioning qualification. · Mus ...

  • Pyramid Consulting

    Validation Engineer

    2 weeks ago

    Pyramid Consulting New York, United States

    Immediate need for a talented · Validation Engineer - I (Assistant) . This is a · 06+ Months Contract · opportunity with long-term potential and is located in · West Point, PA(Onsite) . Please review the job description below and contact me ASAP if you are interested. · Job ...

  • Katalyst Healthcares and Life Sciences

    Validation Engineer

    3 weeks ago

    Katalyst Healthcares and Life Sciences New York, United States

    Responsibilities:Review qualification requirements for any new instrument, equipment and process with system owner and cross-functional teams. · Prepare protocols and reports related to equipment/system/utility qualification (IQ/OQ/PQ), calibrations, engineering, process, packagi ...

  • Premier Life Sciences LLC

    Validation Engineer

    2 weeks ago

    Premier Life Sciences LLC New York, United States

    Not For C2C Candidates Please do not apply even not enquire · Job Title: CQV Validation Engineer · Location: Countrywide USA · Contract Duration: 12+ months · Pay: Negotiable on w2 without any benefits · Responsibilities: · Authoring, editing, and executing technical commission ...

  • Premier Life Sciences LLC

    Validation Engineer

    2 weeks ago

    Premier Life Sciences LLC New York, United States

    Not For C2C Candidates Please do not apply even not enquire · Job Title: CQV Validation Engineer · Location: Countrywide USA · Contract Duration: 12+ months · Pay: Negotiable on w2 without any benefits · Responsibilities: · Authoring, editing, and executing technical commission ...

  • Aequor Inc

    Validation Engineer

    2 weeks ago

    Aequor Inc New York, United States

    Validation Engineer I/ II · Location: Athens, GA · Duration: 6+ Months with possible extension. · Duties: · Perform Smoke studies and assist in semi-annual Media fill qualifications as a SME. · Perform requalification/periodic review of autoclaves, depyrogenation tunnels, cold ...

  • Aequor Inc

    Validation Engineer

    3 weeks ago

    Aequor Inc New York, United States

    Job Title: Validation Engineer · Location: Athens, GA · Duration: 1 Year contract + Will be extend · Shift hours: 40 Hours in a week · Pay Range: $40-48/hr. on W2. · Job Description: · Duties: · Perform smoke studies and assist in semi annual Media fill qualifications as a SME. ...

  • ALTEN Technology USA

    Validation Engineer

    2 weeks ago

    ALTEN Technology USA New York, United States

    We're ALTEN Technology USA, an engineering company that provides solutions for engineering, technology, and product development projects. For decades, we've been helping our clients develop products that are changing the world, from the efficient heavy truck of tomorrow to a full ...

  • Novozen Healthcare LLC

    Validation Engineer

    2 weeks ago

    Novozen Healthcare LLC New York, United States

    What You'll Do · o Commissioning Forms · o C/Q/V Protocols and Summary Reports · o Standard Operating Procedures · o Impact Assessments · o Specifications (URS/FRS/DDS) · o FATS/SATs ·  Perform field/site activities including, but not limited to, the following: · o Attend and w ...

  • LS Solutions Inc.

    Validation Engineer

    2 weeks ago

    LS Solutions Inc. New Jersey, United States Full time, contract, training

    Key Responsibilities Strong Experience in Computer Systems Validation (CSV) within the pharmaceutical industry. Required Bachelor's degree in pharmaceutical Science OR related field of study. Schedule and plan equipment and process qualification workload to meet approved schedule ...

  • Katalyst Healthcares and Life Sciences

    Validation Engineer

    3 weeks ago

    Katalyst Healthcares and Life Sciences Jersey City, United States

    Responsibilities: Primarily responsible for the support and execution of laboratory equipment qualification and associated computer system validation activities in compliance with current cGMP regulations and client's corporate principles, quality policies, standards, and core va ...

  • Yoh, A Day & Zimmermann Company

    Sr. Validation Engineer

    3 weeks ago

    Yoh, A Day & Zimmermann Company New York, United States

    Our client, a global bio-pharmaceutical company, that specializes in core therapeutic and business areas, including gastrointestinal and inflammation, rare diseases, plasma-derived therapies, oncology, neuroscience and vaccines, is actively looking to add a · Sr. Validation Engi ...

  • Akkodis

    HiL Validation Engineers

    2 weeks ago

    Akkodis New York, United States

    Akkodis is seeking several junior to senior-level HiL Validation Engineers for full-time roles in the Detroit Metropolitan area. Qualified candidates will possess more than three years of professional experience in hardware-in-loop testing (bench) accompanied by Python and/or CAP ...