- Responsible for the Front-End Engineering and production design deliverables for large capital projects, TIC in excess of $100MM
- Responsible for the technical oversight and leadership of other engineers and designers.
- Must have experience with development of project scope, work hour estimates, project budgets, schedules and mechanical construction deliverables. Shall be capable of working as a member of an integrated engineering team to produce a coherent, executable construction package.
- Ability to be able to work independently as well as monitor / mentor more junior engineers to meet the required deliverables on one large project or several simultaneous smaller projects.
- May be required to conduct vendor drawing reviews, client interface, model reviews, and related calculations.
- Deep knowledge of HVAC, Plumbing and Fire Protection.
- Bachelor's degree in engineering required; Mechanical discipline preferred.
- 10+ years (minimum) of experience in industrial and commercial design of HVAC and Plumbing systems.
- Fire protection experience preferred.
- Professional Engineering License (P.E.) preferred.
- Proven leadership skills with small engineering design teams and a wide range of very diverse clients from multi-nationals to start-up companies.
- Working Experience with the following:
- Cooling towers, Chillers, Fans, Boilers, Pumps, AHUs, Heat Pumps, Humidification Systems, Hot Water Heaters.
- Designing Clean Room Environments
- Designing Dust Collection Systems
- Design of plumbing systems including domestic hot/cold water lines and sanitary/waste lines.
- Ventilation for potential hazard mitigation
- Fluent with national codes and standards (ICC, ASHRAE, SMACNA, and NFPA)
- HVAC Design Programs Including CHVAC, Trane Trace, AutoCAD and MicroStation.
- Building Automation and Control Systems.
- FP design codes.
- Working knowledge of other engineering disciplines and the ability to coordinate with them to meet design requirements.
- Ability to travel as needed to survey client sites.
- Excellent interpersonal and communication skills with supervisory experience.
- Travel to client sites will comply with all KBR and Client Safety Rules, Processes and Procedures
- Work at client sites may require using and wearing personal protective equipment such as fire-retardant clothing, hearing and eye protection, hard hat and steel-toed boots.
- Work at client sites may require moderate physical exertion including walking to operating areas, ascending/descending stairs, walking the client property.
- This may include climbing ladders, lifting to up to 35 lbs., etc.
-
Mechanical Engineer
1 week ago
PABCO Building Products, LLC. Newark, United StatesPress Tab to Move to Skip to Content Link · Building excellence through our people, meaningful relationships and superior quality since 1972, PABCO Building Products, LLC, manufactures gypsum wallboard products, paper and asphalt roofing shingles for the building industry. We hav ...
-
Mechanic Engineer
2 weeks ago
City Experiences Jersey City, United StatesSalary Range - $30 - $35/HRCity Experiences is seeking a Mechanic Engineer for our Statue Cruises operation in Jersey City.About You:This person will be adaptable, dynamic, and embody City Experiences' RESPECT Service System.About the Opportunity:Responsible for the maintenance a ...
-
Mechanical Engineer
3 weeks ago
Technical Staffing Resources Newark, United StatesTSR is seeking to employ a few Mechanical Engineers to perform engineering calculations, writing specifications, scope of work, sizing equipment, and designing. These are contract positions with one of the country's largest EPC firms. The expected duration of the project is 1 yea ...
-
Mechanic Engineer
3 weeks ago
Hornblower - City Experiences Jersey City, NJ, United StatesSalary Range - $30 - $35/HR · City Experiences is seeking a Mechanic Engineer for our Statue Cruises operation in Jersey City. · About You: · This person will be adaptable, dynamic, and embody City Experiences' RESPECT Service System. · About the Opportunity: · Responsible for th ...
-
Mechanical Design Engineer – IC Packaging
1 week ago
Amoria Bond Newark, United StatesMechanical Design Engineer – IC Packaging · Sponsorship is not offered for this role. · Are you a seasoned Mechanical IC Packaging Engineer seeking an exceptional opportunity to design and implement next-generation optical modules for high-performance computing applications.? We ...
-
Mechanical Engineer
3 weeks ago
PEAK Technical Staffing USA Newark, United StatesOur client is seeking talented and forward-thinking Mechanical Engineers for a direct hire opportunity. This position offers the potential to play a strategic role in the company's growth and development. We would want the candidate to have experience in a consulting engineering ...
-
Mechanical Engineer
1 day ago
U.S. Pipe Union City, United StatesJob Description · Job Description · Why Join Our Team? · Do you want to be part of a team that is making a positive difference in lives all across the globe? Do you want to be part of a culture where you are recognized, respected, and rewarded for a job well done? U.S. Pipe has ...
-
Senior Mechanical Design Engineer
3 weeks ago
HireResources Jobs Newark, United StatesJob DescriptionJob Description · Our Client is seeking a Senior Mechanical Design Engineer specializing in 3D packaging, thermal system design, and hardware build and test. The Senior Mechanical Design Engineer will be involved in: · 3D packaging of complex power converters, ener ...
-
Mechanical Engineer
1 week ago
Stellar Innovations Sands Point, United StatesAre you looking for a career change and interested in actively participating in projects? We are looking for an experienced Mechanical Engineer (m/f/d) to join our team at Sands Point. · What you can expect: · A secure and modern workplace in a family-like environment · Flat hier ...
-
Mechanical Engineer II
2 weeks ago
Raycap Inc Kearny, United StatesJob Description · Job DescriptionRaycap is seeking a mid-level engineer for our Switchgear division responsible for the oversight, input and design of low voltage switchgear, switchboard, panel board CRD's and fabrication drawings. · Qualifications: · This position requires 3-5 y ...
-
Mechanical Engineer
2 weeks ago
Pkaza New York, United StatesOur client is an Engineering Design and Commissioning Company that is a leader in the data center space. This role will be onsite at the Customer's Data Center. They provide design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Spa ...
-
Refrigerator Mechanic Engineer
2 weeks ago
Seton Hall University South Orange, United StatesTroubleshoots and repairs packaged a/c equipment, split a/c equipment, chillers, pumps, motors, boilers, furnaces and ancillary equipment. Monitors the Universitys building automation system to identify and respond to problems. Repairs and installs Mechanic, Engineer, Automotive, ...
-
Mechanical Engineer
4 weeks ago
EXP New York, United States Full timeAt EXP, we're driven to provide innovative solutions for the world's built and natural environments. As a team of engineers, architects, designers, scientists, creators and a community of professionals, we bring diverse and talented people together to solve the world's most compl ...
-
Mechanical Systems, Fabrication Design Engineer
2 weeks ago
Xpertbizz Harrison, United StatesJob Description · Job DescriptionJob Description · Skills: Revit or Catia, Mechanical Systems, Architectural Engineering or Construction experience · Qualifications: A degree in engineering or related field · Locations: NY, NY 10005 OR Harrison, NJ 07029 · Our team seeks a highly ...
-
Mechanical Engineer
1 week ago
Columbia Consulting Engineers, PLLC (MBE/DBE) New York, United StatesAbout Our Firm: · Our vision is to connect the world through infrastructure. · We provide professional engineering and construction management services for infrastructure projects in NYC. We partner with the nation's most prestigious public agencies and engineering firms to deli ...
-
Mechanical Design Engineer
1 week ago
Equiliem Jersey City, United StatesAbout this Role · As a Senior Mechanical Engineer, you will lead the design of the critical components and subassemblies of our prototypes and the development of our commercial products. Your expertise and creative problem-solving skills will immediately facilitate the successf ...
-
Mechanical HVAC Engineer
3 weeks ago
Libertyjobs Newark, United StatesJob Details: · Mechanical HVAC Engineer · One of the premier national MEP Firms with an office in NJ has an immediate need for a Mechanical HVAC Engineer. We are looking for quality professionals with a high degree of skill and integrity. · Multi-disciplined Engineering Firm h ...
-
Senior Mechanical Engineer
4 weeks ago
openshelf Newark, United StatesCompany Overview: · openshelf is a seed-stage healthcare robotics startup. We're focused on improving the efficiency and accuracy of inventory in the retail optometry and pharmacy spaces. Our first product puts a tiny automated warehouse inside any optometry office. · We're seeki ...
-
Senior Mechanical Engineer
3 weeks ago
Equiliem Jersey City, United StatesJob Description · Job DescriptionAbout this Role · As a Senior Mechanical Engineer, you will lead the design of the critical components and subassemblies of our prototypes and the development of our commercial products. Your expertise and creative problem-solving skills will imme ...
-
Electro Mechanical Engineer
4 weeks ago
PRI Global Newark, United States3+ years of experience in design and development of electromechanical products with mechanical and electrical interfaces having high quality cosmetic requirements for a premium in-cabin user experience. Experience in defining haptics, conducting focus group assessments, and dicta ...
Lead Mechanical Engineer - Newark, United States - Technical Staffing Resources
Description
Technical Staffing Resources is looking for a Lead Mechanical Engineer to lead our building services design team in Fire Protection, HVAC & Plumbing. The Wilmington Operations Center supports multiple mechanical, HVAC/FP and plumbing design efforts from conceptual design through construction support for Chemical and Biofuel clients. Our clients range from large multi-nationals to start-up companies intensely focused on providing unique solutions which require creative and out of the box thinking. This role is a critical leadership role to manage our building services core group as well as oversee key subcontractors and international design office for work share.
Do not wait to apply after reading this description a high application volume is expected for this opportunity.
Your experience must include managing small teams in both industrial building HVAC, plumbing systems, laboratory areas as well as process applications such as dust collection systems and vapor management systems. The ideal candidate will also have fire protection experience. In-depth knowledge of industry codes is mandatory. In this position, you will be developing scope of services, work hour estimates and schedules that role up into the overall Mechanical discipline.
Work location is a hybrid schedule; 2-3 days in the office with work assigned from the Newark, DE office and may require occasional travel to the client sites. Will consider REMOTE based on experience.
Functional job responsibilities will include but are not limited to:
Required Education, Experience, & Skills ?
PHYSICAL REQUIREMENTS