- Inspects ferrous and non-ferrous parts by the penetrant process to check for discontinuities in parts that would be detrimental to the operation of the complete unit.
- Removes or explores the extent of surface flaws, using abrasives or files.
- Uses caustic soda or acid etch to determine the nature of defects.
- Uses black light and comparison plate to determine acceptance of fluorescent inspected parts or assemblies.
- Visually checks parts.
- Ability to accept or reject parts based on the location the type of defect and the stress the part will be subjected to in operation per blueprint specifications.
- Identifies defect as being caused by cleaning, heat treatment, and/ or manufacturing or a combination of the above factors.
- Checks blueprints in some cases to determine whether the tolerances will allow the part to be reworked,
- Writes up rework or reject tickets.
- Perform rework, repair, and other operations with the work described.
- Follow all Senior policies and procedures.
- Other duties as assigned.
- High School Diploma or General Education Degree; or 2 years of related experience and/ or training; or equivalent combination of education and experience. Must have Level I Penetrant Certification.
- Language:Ability to read, comprehend, and communicate simple instructions in English.
- Reasoning Ability: Ability to apply a general understanding to carry out detailed, written and oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
- Mathematical Ability:Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Must be able to use shop math.
- Other Abilities: Must be able to read and interpret blueprints. Must be able to perform all the work operations as described in the duties listed, and have knowledge of necessary tools and equipment. A Penetrant Inspection Level II shall have a minimum of 32 hours of documented formal training in accordance with approved training outlines, and a minimum of 400 hours of documented experience. This individual must pass the examination for certification if required.
- Hand tools, measuring instruments, scales, marking pencils or crayons, and inspection instruments.
- Ferrous and non-ferrous metals and their alloys in the form of sheet tubular stock, casting, forgings, extrusions, machined and formed parts.
- Access to our facility (and, therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) and/ or Export Administration Regulations (EAR) to U.S. Citizens, lawful permanent residents, U.S. refugees, asylees, or temporary residents under amnesty provisions [as defined in 8 USC 1324b(a)(3)] and properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of charge ability for export control purposes. Additionally, potential employee's names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive technical data.
-
Ndt Level Ii Inspector
2 weeks ago
Sunland Aerospace Fasteners Pacoima, United StatesOverview: · **Responsibilities**: · - Analyze and inspect products to ensure they meet quality standards · - Assemble and disassemble components for inspection · - Use calipers, micrometers, and other measuring tools to verify product dimensions · - Fabricate inspection tools as ...
-
Inspector - Level 1
1 week ago
Carlton Forge Works Paramount, United States**Company Profile** · PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. · In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E ...
-
Quality Inspector Level 1
2 weeks ago
NC Dynamics, LLC Long Beach, United States**Job Title**: Quality Inspector I · Job Category · - Manufacturing ? Greater Los Angeles · **About Us**: · NC Dynamics is a leading diversified fully servicing aerospace manufacturing company in the greater Los Angeles area that services the commercial aviation and defense indus ...
-
Ndt Level Ii Inspector
3 weeks ago
RBC Sonic Industries, Inc Torrance, United States**Position Summary**: · Sets up and performs Non Destructive inspection (Magnetic Particle and Fluorescent Pentrant) of all Products in accordance with product specifications and workmanship standards. Follows established methods of inspection and procedures to determine product ...
-
Thread Specialties Anaheim, United States**LEVEL 3 Quality control** needed for inspecting small tight tolerance parts. Responsibilities include 1st Article Inspection, In Process Inspection, Final Inspection and FAIR. You must have 5 years level 3 experience, be detailed oriented, self-starter and proficient at Microso ...
-
Inspector - Level 1
1 week ago
Carlton Forge Works Paramount, United States Full timeCompany Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, cr ...
-
Level 1 Source Inspector
2 weeks ago
SQA Services Anaheim, United StatesJob Description · Job DescriptionIf you would like to work with one of the game's most exciting names, we want to hear from you. If you have a 'quality eye' and have what it takes to keep up with the best in the business, this is your program · What to expect: · We are looking fo ...
-
Quality Inspector Level III
1 week ago
RTC Aerospace Los Angeles, United States Full timeAbout us: · This position is for RTC Aerospaces sister company, Vanderhorst Brothers, Inc. (VBI) located in Simi Valley, CA. VBI is a team of highly skilled professionals from a variety of backgrounds. We work together to support our customers through expertise, cooperation, inno ...
-
Quality Inspector Level III
3 weeks ago
RTC Aerospace Simi Valley, United StatesAbout us: · This position is for RTC Aerospace's sister company, Vanderhorst Brothers, Inc. (VBI) located in Simi Valley, CA. VBI is a team of highly skilled professionals from a variety of backgrounds. We work together to support our customers through expertise, cooperation, inn ...
-
Quality Inspector Level III
3 weeks ago
RTC Aerospace Simi Valley, United StatesJob Description · Job DescriptionAbout us: · This position is for RTC Aerospace's sister company, Vanderhorst Brothers, Inc. (VBI) located in Simi Valley, CA. VBI is a team of highly skilled professionals from a variety of backgrounds. We work together to support our customers th ...
-
Quality Inspector Level III
3 weeks ago
RTC Aerospace Simi Valley, United StatesAbout us: · This position is for RTC Aerospace's sister company, Vanderhorst Brothers, Inc. (VBI) located in Simi Valley, CA. VBI is a team of highly skilled professionals from a variety of backgrounds. We work together to support our customers through expertise, cooperation, inn ...
-
Quality Inspector Level III
2 weeks ago
RTC Aerospace Simi Valley, United StatesJob Description · Job DescriptionAbout us: · This position is for RTC Aerospace's sister company, Vanderhorst Brothers, Inc. (VBI) located in Simi Valley, CA. VBI is a team of highly skilled professionals from a variety of backgrounds. We work together to support our customers th ...
-
Quality Inspector Level III
3 weeks ago
RTC Aerospace Simi Valley, United StatesAbout us: · This position is for RTC Aerospace's sister company, Vanderhorst Brothers, Inc. (VBI) located in Simi Valley, CA. VBI is a team of highly skilled professionals from a variety of backgrounds. We work together to support our customers through expertise, cooperation, inn ...
-
NDE Level II Inspector
5 days ago
Vast Long Beach, United StatesVast is looking for an · NDE Level II Inspector (PAUT, UT) , reporting to the · Manager of Quality, · to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations. This will be a full-time, · non-exe ...
-
NDE Level II Inspector
5 days ago
Vast Long Beach, United StatesVast is looking for a NDE Level II Inspector (RT) , reporting to the · NDE Supervisor , to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations. · This will be a full-time, non-exempt · position ...
-
Quality Inspector Level III
3 weeks ago
RTC Aerospace Simi Valley, United StatesAbout us: · This position is for RTC Aerospace's sister company, Vanderhorst Brothers, Inc. (VBI) located in Simi Valley, CA. VBI is a team of highly skilled professionals from a variety of backgrounds. We work together to support our customers through expertise, cooperation, inn ...
-
Quality Inspector Level III
2 weeks ago
RTC Aerospace Simi Valley, CA, United StatesAbout us: · This position is for RTC Aerospace's sister company, Vanderhorst Brothers, Inc. (VBI) located in Simi Valley, CA. VBI is a team of highly skilled professionals from a variety of backgrounds. We work together to support our customers through expertise, cooperation, in ...
-
Quality Inspector Level III
1 week ago
RTC Aerospace Simi Valley, United StatesJob Description · Job DescriptionAbout us: · This position is for RTC Aerospace's sister company, Vanderhorst Brothers, Inc. (VBI) located in Simi Valley, CA. VBI is a team of highly skilled professionals from a variety of backgrounds. We work together to support our customers th ...
-
NDT Entry Level Inspectors
5 days ago
ATS FAMILY Santa Fe Springs, United StatesJob Details · Job Location · III SANTE FE SPRINGS - SANTE FE, CA · Education Level · High School · Job Shift · Any · Job Category · Entry Level · Description · Applied Technical Services, LLC ("ATS" or the "Company") is a leading provider of critical testing, inspection, ...
-
NDT Entry Level Inspectors
1 week ago
Applied Technical Services Santa Fe Springs, United StatesJob Details · Job Location III SANTE FE SPRINGS - SANTE FE, CAEducation Level High SchoolJob Shift AnyJob Category Entry Level Description · Applied Technical Services, LLC ("ATS" or the "Company") is a leading provider of critical testing, inspection, certification, and comp ...
Penetrant Inspector Level II - Burbank, United States - Senior Plc
Description
Who is Senior plc?Senior plc is an international, market-leading, engineering solutions provider with 30 operating businesses in 13 countries. Senior designs, manufactures, and markets high-technology components and systems for the principal original equipment producers in the worldwide aerospace, defense, and land vehicle and power & energy markets. The Group is split into two divisions, Aerospace and Flexonics, servicing five key sectors.
Our global values underpin what we do, and how we do it ...
Safety - Integrity - Customer Focus - Respect & Trust - Accountability - Excellence
Who is SSP?
Senior Aerospace SSP specializes in designing, manufacturing, and qualifying complex ducting systems for aerospace applications. Since its humble roots in 1945, the campus has now expanded to include a 59,000 sq. ft high-volume production facility, in addition to its legacy 131,000 ft2 main buildings which combined, accommodate over 500 employees. Vertically integrated with its foundry, fabrication shop, and ISO-certified engineering lab, Senior Aerospace SSP was acquired by Senior PLC in 1995 and has continued its expansion into new programs and technologies.
Why join SSP?
Senior Aerospace SSP is the leader in innovative design and manufacturing methods in the area of complex aerospace systems. Joining our team will provide you with a rewarding career with a tight-knit and collaborative team. You will also enjoy a competitive compensation package that includes a market-led base salary, a comprehensive benefits package along with wellness benefits, a matching 401K plan, and paid time off. Apply today for an opportunity to join our team
If an offer of employment is made it will be contingent upon passing all of the following: Drug Test, Background Check, ITAR, and U.S. Export Compliance Screening.
What does the job involve?
Summary-Inspect ferrous and non-ferrous metal parts for flaws using a fluorescent penetrant or dye check inspection process. Be thoroughly familiar with the scope and limitations of the applicable NDT method and be capable of organizing NDT investigations.
Essential Duties and Responsibilities:
Under general supervision, must be able to perform a variety of job duties including, but not limited to:
Education and/or Experience:
