Signal Technician II - Frisco, United States - City of Frisco (TX)

Description

Under general direction of the Senior Signal Technician, the Signal Technician II will construct, install, test, inspect, troubleshoot, repair, and maintain traffic signals, school zone flashers, and streetlights.

The intent of this position description is to provide a representative summary of the major duties and responsibilities performed by incumbent(s) in this position.

Incumbent(s) may not be required to perform all duties in this description and incumbent(s) may be required to perform position-related tasks other than those specifically listed in this description.

• Installs, troubleshoots and repairs traffic signal, school zone flashers, and street light equipment.
• Inspects traffic signal equipment at operational intersections to ensure signals and school zone flashers are operating as programmed.
• Responds to trouble calls on equipment malfunctions; identifies problem; repairs or replaces faulty equipment; documents each trouble call and problem resolution.
• Performs line locates for underground traffic signal and lighting equipment, as needed.
• Programs and places message boards for special events or emergencies, as needed.
• Routinely patrols streets to identify traffic signals that may need repair.
• Performs routine maintenance on traffic control devices and other equipment.
• Reads and interprets schematics, blueprints, and other diagrams; such as technical manuals, NEC and MUTCD.
• Replaces parts such as load switches, relays and flashers, and documents process.
• Makes recommendations and carry out plans with the approval of the supervisor.
• Assists in maintaining daily work records, maintenance history and work orders.
• Installs, repairs, maintains and inspects traffic control signage, pavement markings, guardrails and permanent barricades.
• Assists with construction inspection of new installation of traffic signals and street light equipment.
• Assists with fabrication of traffic control signs.
• Assists with the inventorying of materials and equipment.
• Flags traffic and installs work zone signage and barricades needed to perform work safely at job sites.
• Implements safety procedures at job sites.
• Performs manual traffic and pedestrian counts.
• Reads and interprets plans, schematics, product safety data sheets, and the Manual of Uniform Traffic Control Devices.
• Completes work orders summarizing daily work tasks.
• Trims trees that obstruct traffic control signage.
• Cleans work sites and restores landscaping to original condition upon completion of all projects.
• May be required to remove debris, fallen trees and limbs; replace street signs during or after hazardous weather or other emergencies.

• Must work on-call and overtime as required.
• Must live within 45 minutes of Frisco city limits.
• May be required to work weekends or after hours to support traffic management and operations for special events.
• May be required to assist with setting up traffic control or detours necessary for special events and emergency situations.
• May be required to work overnight shifts for the installation of pavement markings.
• Provides backup assistance, on-call coverage and support to other City departments as assigned.
• Travels to work sites, and to attend meetings, conferences and training.
• Performs other related duties as assigned.
• Regular and consistent attendance for the assigned work hours is essential.
• Knowledge of City policies and procedures.
• Knowledge of pertinent federal state and local laws and ordinances pertaining to roadway, lighting and traffic signal operations.
• Knowledge of the common principles, practices, equipment, materials and methods used in the installation and maintenance of traffic control devices.
• Knowledge of electrical codes, electronic circuits and circuit logic.
• Knowledge of TxDOT work zone safety requirements and procedures.
• Knowledge of the Manual of Uniform Traffic Control Devices.
• Knowledge of traffic control sign, pavement marking, and guardrail maintenance, repair, and construction methods and practices.
• Knowledge of occupational safety and health rules, regulations, practices and procedures.
• Knowledge of TxDOT work zone safety requirements and procedures.
• Knowledge of computers and computer related software.
• Skill in reading blueprints or diagrams.
• Skill in troubleshooting and resolving electronics related problems.
• Skill in effective oral and written communications.
• Skill in basic mathematical calculations.
• Skill in planning and coordinating work site activities.
• Skill in resolving customer complaints and concerns.
• Ability to maintain accurate and complete records.
• Ability to communicate effectively verbally and in writing.
• Ability to change ballast, capacitors, bulbs, and fuses in roadway lighting.
• Ability to work with voltages that vary 120/240, 240/480 & straight 480.
• Effective oral and written communication skills.

• Associates degree from Technical/Trade School in a related field preferred.
• High School Diploma or GED plus two (2) years' experience in the installation, maintenance and repair of traffic control devices; or equivalent combination of education and experience.
• Must have IMSA Level I Certification in Traffic Signals or the ability to obtain within 12 months of date of hire (equivalent TEEX course certifications will be considered).
• IMSA Work Zone Safety or ability to obtain within 6 months of date of hire (TEEX course certification will be considered).
• Must have IMSA Level I Certification in Roadway Lighting or the ability to obtain within 24 months of date of hire (equivalent TEEX course certifications will be considered).
• Must pass a pre-employment drug screen, physical agility test, criminal background and MVR check.
• Must possess State of Texas Class A CDL Driver's License within 6 months of employment.
• Work is performed in a construction site environment.
• May be subject to exposure to extreme temperature conditions, confined spaces, trenches, hazardous chemicals, fumes, air and water borne pathogens and infectious diseases.
• Balancing - maintain equilibrium to prevent falling while walking, standing, or crouching.
• Climbing - ascending, descending ladders, stairs, ramps, requires body agility.
• Crawling - moving about on hands, knees, or hands, feet.
• Crouching - bending body forward by bending leg, spine.
• Grasping - applying pressure to object with fingers, palm.
• Handling - picking, holding, or working with whole hand.
• Hearing - perceiving sounds at normal speaking levels, receive information.
• Hearing - receive detailed information, make discrimination in sound.
• Kneeling - bending legs at knee to come to rest at knees.
• Lifting - raising objects from lower to higher position, moving objects side to side, using upper extremities, back.
• Mental Acuity - ability to make rational decisions through sound logic, deductive reasoning.
• Pulling - use upper extremities to exert force, haul or tug.
• Pushing - use upper extremities to press against objects with force, or thrust forward, downward, outward.
• Reaching - extending hands or arms in any direction.
• Repetitive Motion - substantial movements of wrists, hands, fingers.
• Speaking - expressing ideas with spoken word, convey detailed, important instructions accurately, concisely.
• Standing - for sustained periods of time.
• Stooping - bending body downward, forward at waist, with full motion of lower extremities and back.
• Talking 1- expressing ideas by spoken word.
• Talking - shouting to be heard above ambient noise.
• Visual Acuity - color, depth perception, field of vision.
• Visual Acuity - determine accuracy, neatness, observe facilities/structures.
• Visual Acuity - operate motor vehicles/heavy equipment.
• Visual Acuity 5 -close acuity for inspection of small defects, machines, use measurement devices, or fabricate parts.

• Work performed is primarily medium work, exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.

• Uses GPS equipment and digital camera to locate signs.
• Works with chemicals to clean equipment.
• Operates light and heavy construction equipment including concrete saws, back hoes, bobcats, MMA applicator, thermoplastic applicator, paint sprayer, epoxy dispenser, hand squeeze roller applicator, post hole diggers, pole puller, air tools, compressor and grinders as needed.