- Understands and follows all electrical safety regulations and codes.
- Installing wiring and conduit in assembling and troubleshooting circuits.
- Maintain, troubleshoot, and repair electrical motors and generators.
- Perform task on electronic equipment including but not limited to troubleshooting and repairing camera systems, electronic sensors and programming programmable logic controllers used to operate complex machinery.
- Calibrate, repair, or replace instrument transmitters.
- Parts- analyzing part failure/malfunction, considering alternatives, using precision equipment, maintaining spare parts inventory.
- Preventative Maintenance - Performing routine scheduled maintenance tasks related to instrument and electrical work.
- Equipment History Records- Maintain records using CMMS system, keep system up to date, modify as required for new equipment, parts, etc.
- LOTO with Operators prior to starting work on any equipment.
- Other duties as assigned.
- Anaergia promotes a Safety Policy which fosters a DO IT SAFE or not at all philosophy. Anaergia applies strict adherence to plant permit requirements with a focus on sustainability and protecting the environment. This position requires the ability to strictly follow safety practices, rules and procedures working with process equipment and mentor and coach less experienced operators in the same. Ability to look after others and communicate to them when you observe unsafe behaviors. Ability to take a proactive approach to fostering a safe work environment with a philosophy "Zero Injuries are Achievable". Identify, report and correct unsafe working conditions and/or equipment in an efficient and timely manner. Respond quickly to emergency conditions on equipment and ability to learn equipment isolation Lock Out Tag Out procedures. Ability to work at heights and small confined spaces. Ability to Wear Personnel Protective Equipment such as but not limited to Hard Hat, Safety Glasses, Goggles, Hearing Protection, Safety Shoes/Boots, Respirators, SCBA, Dust Masks, chemical suits or Electrical Proximity Suits.
- Relevant post-secondary education and/or trades certification and/or significant industrial training in the relevant technical field required.
- 2 years of progressively responsible experience maintaining industrial plant process equipment.
- Solid Waste/Wastewater/Biogas/Power Generation/Industrial specific competences
- Attainment of journey-level status with work experience in industrial plant process equipment.
- Must possess a valid driver's license and a satisfactory driving record, the ability to become mobile crane certified, manlift and forklift certified.
- Work independently with minimal supervision
- Ability to ready schematics, blueprints, and other technical documents
- Excellent attention to detail
- Excellent communication skills
- Basic computer skills
- Fluent in English
-
Instrumentation & Controls Technician
1 week ago
Anaergia Warsaw, United StatesINSTRUMENTATION & CONTROLS TECHNICIAN - CARBON CYCLE BIOENERGY FACILITY, WARSAW, NORTH CAROLINA · About Us: · Anaergia (TSX: ANRG) is a global leader in offering sustainable solutions for the production of clean energy and the conversion of waste streams to resources. Through a ...
-
Industrial Controls Technician
5 days ago
Villari Foods Warsaw, United StatesJob Description · Job DescriptionSalary: Based On Experience · Are you an experience in Industrial Controls and looking for a job where your attention to detail and experience can make a difference? Look no further Villari Foods is currently seeking an Industrial Controls Tech t ...
-
Controller commissioning technician
1 week ago
Nexus Innovations Bonnetsville, United StatesThe Primetals Technologies Limited, a company of Mitsubishi Heavy Industries based in London (United Kingdom), employs 7,000 people worldwide and approximately 500 employees in Germany at the locations of Erlangen (headquarters), Willstätt and Saarbrücken. As a leading partner fo ...
-
Automation Controls Technician
2 weeks ago
Mt. Olive Pickle Company Inc. Mount Olive, United StatesMt. Olive Pickle Company, Inc., located at the Corner of Cucumber & Vine in Mount Olive, North Carolina, manufactures the best-selling brand of pickles in the country with distribution in all 50 states. The company ferments pickles on site and produces fresh-packed pickles, peppe ...
-
6201 Quality Control Technician
1 week ago
Mt Olive Pickle Company Mount Olive, United StatesJob Description · Job DescriptionDescription:We have an opening for a Night Shift QC Tech · Summary · Performs Quality Control inspections in assigned work area. Collects and tests samples, documents results and reports deviations from standards based on Quality Control specifica ...
-
Training as an industrial mechanic
1 week ago
FusionTech Faison, United StatesYour challengeWorking at various training stations such as the training workshop, CNC production, maintenance, quality assurance, testing and prototype construction, assembly and production control, central technology · Learning turning and milling skills as well as assembling, m ...
-
Registered Nurse
3 hours ago
Fresenius Medical Care Goldsboro, United States Full timePOSITION FEATURES: · 12 hour Shifts 3 days a week or 4 10 hour shifts 4 days a week · No Sunday or overnight shifts · PURPOSE AND SCOPE: · The registered professional nurse (CAP RN 1) position is an entry level designation into the Clinical Advancement Program for Registered Nur ...
-
Operations & Maintenance Technician
1 week ago
Anaergia Inc. Warsaw, United StatesAbout Us: · Anaergia (TSX: ANRG) is a global leader in offering sustainable solutions to produce clean energy and the conversion of waste streams to resources. Through a proven portfolio of proprietary technological solutions, Anaergia maximizes the generation of renewable energy ...
-
3rd Shift Preventative Maintenance Trainee
5 days ago
Villari Foods Warsaw, United StatesJob Description · Job DescriptionSalary: Based on Experience · Are you an experience in Preventative Maintenance and looking for a job where your attention to detail and experience can make a difference? Look no further Villari Foods is currently seeking an PM Maintenance Traine ...
-
Villari Foods Warsaw, United StatesJob Description · Job DescriptionSalary: Based on Experience · Are you an experience in Preventative Maintenance and looking for a job where your attention to detail and experience can make a difference? Look no further Villari Foods is currently seeking an PM Maintenance Technic ...
-
2nd Shift Ammonia Refrigeration Technician
5 days ago
Villari Foods Warsaw, United StatesJob Description · Job DescriptionSalary: Based on Experience · Are you an experienced with ammonia or a ammonia refrigeration technician professional looking for a job where your knowledge and experience can make a big impact? Look no further Villari Foods is currently seeking a ...
-
Training as a mechatronics technician 2024
1 week ago
Crimson Enterprises Goldsboro, United StatesFor the Vattenfall Wärme Berlin AG, we are looking for you to start on September 1st, 2024 for our · Apprenticeship as a Mechatronics Technician · at our location in Berlin. · Today, almost nothing runs without electrical energy. Whether in power plants, companies, or homes: expe ...
-
Apex Solutions Brogden, United StatesJob Title: Chemical Production Specialist Apprentice · Chemical Production Specialists work in the chemical industry and are involved in the production and processing of chemicals. They operate equipment in the chemical industry and monitor and document the production of products ...
-
Operations & Maintenance Technician
1 week ago
Anaergia Warsaw, United StatesJob Description · Job DescriptionSalary: · About Us: · Anaergia (TSX: ANRG) is a global leader in offering sustainable solutions to produce clean energy and the conversion of waste streams to resources. Through a proven portfolio of proprietary technological solutions, Anaergia ...
-
Medical Laboratory Technician I
1 week ago
Vidant Health Kenansville, United StatesJob Description · ECU Health · About ECU Health Duplin Hospital · ECU Health Duplin Hospital is an 81-bed facility located in Kenansville, North Carolina. The 15-bed emergency department serves approximately 25,000 patients per year. In addition to providing general medical and s ...
-
Medical Laboratory Technician I
1 week ago
Vidant Health Kenansville, United StatesJob Description ECU Health About ECU Health Duplin HospitalECU Health Duplin Hospital is an 81-bed facility located in Kenansville, North Carolina. The 15-bed emergency department serves approximately 25,000 patients per year. In addition to providing general medical and surgical ...
-
Medical Laboratory Technician I
6 days ago
Vidant Health Kenansville, United StatesJob Description · ECU Health · About ECU Health Duplin Hospital · ECU Health Duplin Hospital is an 81-bed facility located in Kenansville, North Carolina. The 15-bed emergency department serves approximately 25,000 patients per year. In addition to providing general medical an ...
-
Medical Laboratory Technician I
6 days ago
Vidant Health Kenansville, United StatesJob Description · ECU Health · About ECU Health Duplin Hospital · ECU Health Duplin Hospital is an 81-bed facility located in Kenansville, North Carolina. The 15-bed emergency department serves approximately 25,000 patients per year. In addition to providing general medical and s ...
-
Donor Phlebotomy Technician
2 weeks ago
Sampson Regional Medical Center Clinton, United StatesSampson Regional Medical Center is hiring a Donor Phlebotomy Technician to join the Blood Bank team in the Laboratory · Description: · This is a full-time position. The selected candidate will recruit donors; help coordinate blood drives; schedule, screen and interview prospect ...
-
Evisceration Himp Sorter
6 days ago
Butterball Mount Olive, NC, United StatesButterball, LLC, one of America's most iconic brands, helps consumers celebrate Thanksgiving and every day in between. Located in the thriving Raleigh-Durham, North Carolina area, our goal is to provide a diverse array of career opportunities and paths which include our farms, pr ...
Instrumentation & Controls Technician - Warsaw, United States - Anaergia
Description
Job Description
Job DescriptionSalary:INSTRUMENTATION & CONTROLS TECHNICIAN - CARBON CYCLE BIOENERGY FACILITY, WARSAW, NORTH CAROLINA
About Us:
Anaergia (TSX: ANRG) is a global leader in offering sustainable solutions for the production of clean energy and the conversion of waste streams to resources. Through a proven portfolio of proprietary technological solutions, Anaergia maximizes the generation of renewable energy, diversion of waste from landfill and reduction of greenhouse gases for customers across the municipal, industrial, commercial and agricultural sectors. Headquartered in Burlington, ON, and through its multiple subsidiaries across North America, Europe, Africa, and Asia, Anaergia is trusted at more than 1,600 installations globally.
Job Overview:
This Position will support the Maintenance Manager with respect to all maintenance and repairing of components for a variety of electrical equipment and plant instrumentation.
Job Responsibilities:
Safety/ Environmental Focus
Job Requirements:
Education and Experience
For additional information on Anaergia, please visit
As an Equal Opportunity Employer, Anaergia provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Anaergia will provide reasonable accommodations for qualified individuals with disabilities.
