Jobs
>
Solon

    CNC Machinist - Solon, United States - AB Staffing

    AB Staffing
    AB Staffing Solon, United States

    1 week ago

    Default job background
    Description

    MACHINIST / CNC OPERATOR

    Description:

    Personnel performing Machinist functions shall possess the minimum requisite education, training, skills and experience consistent with the duties and responsibilities of such functions and activities as shall be determined by the hiring authority, including the following minimum requirements:

    Education and Experience Requirements:

    High school diploma or equivalent preferred, or any combination of education, experience, and training that provides the required knowledge, skills and abilities.

    Knowledge and Skills Requirements:

    This position is found in multiple departments and may require any combination of the following knowledge and skills:

    • Be able to use specialized measuring instruments including but not limited to calipers, micrometers, gages, indicators, and the ability to set up, adjust and otherwise use manual and CNC machines including but not limited to lathes, milling machines, grinders and radial drills.
    • Have the ability to read and work from blueprints, drawings and other specifications as needed to complete the specific job duties.
    • Have the ability to speak and understand English and grammar sufficient to read, write, enter or utilize information pertinent to the equipment and department, and to otherwise communicate effectively, both orally and in writing.
    • Be able to establish and maintain effective working relationships as required by specific job duties.
    • Have the ability to receive and comprehend ongoing training and instruction as required by specific job duties.

    Responsibilities include:

    • Preparing and operating CNC machines to perform tasks such as drilling, grinding, milling, turning etc.
    • Understanding specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc.
    • Translate instructions into computer commands so the machines can perform the correct function.
    • Prepare and load raw materials and parts onto the machines.
    • Prepare a test run to check if the machines produce outputs according to specifications.
    • Supervising the machines while they execute the tasks and make any necessary adjustments to produce a better result.
    • Inspect and measure finished products and compare them with requirements to determine if the process has been completed properly.
    • Check and maintain machinery daily to ensure functionality.
    • The Client also has identified Cell Leaders for each manufacturing cell. These individuals are Machinists / CNC Operators with the added responsibilities of being manufacturing cell supervisors responsible for their own individual process (example: Turning, Milling, Grinding, etc.) as well as setting up jobs, verifying other operators work within their cell and training the operators within their cell. Each process consists of multiple machines and operators.
  • Integrity Technical Services

    CNC Machinists

    1 week ago

    Integrity Technical Services Solon, United States

    CNC Machinists (2nd Shift) - Solon, OH - JOB · Local candidates only please. · Pay Range: $ $30.00/HR Permanent Position with Benefits. · A North East Ohio area manufacturer is seeking to hire a 2 nd Shift CNC Machinist. Candidates must have previous experience with set up, pr ...

  • ITS

    CNC Machinists

    1 day ago

    ITS Solon, United States

    CNC Machinists (2 nd Shift) - Solon, OH # · Local candidates only please. · Pay Range: $ $30.00 per Hour - Permanent Position with Benefits. · A North East Ohio area manufacturer is seeking to hire a 2 nd Shift CNC Machinist. Candidates must have previous experience with set up, ...

  • Aerotek

    CNC Machinist

    1 day ago

    Aerotek Solon, United States

    **CNC Machinist**2nd or 3rd shiftPay: $19+ per hour**Description:**Operate machinery and move materials (physically or with equipment) to machine materials based on pre-set programs or settingsInterface with machine(s) to make simple and intermediate adjustments in settings, tool ...

  • Aerotek

    CNC Machinist

    1 week ago

    Aerotek Solon, United States

    All Shifts$23/hr+ based on experience**Description:** · • Work with supporting services to develop new machining processes and programs according to specifications. · • Prove out new processes and help perform capability studies for new machines / processes · • Work with engineer ...

  • Aerotek

    CNC Machinist

    17 hours ago

    Aerotek Solon, United States

    **Description:** · • Work with supporting services to develop new machining processes and programs according to specifications. · • Prove out new processes and help perform capability studies for new machines / processes · • Work with engineering and vendors to complete tooling t ...

  • Aerotek

    CNC Machinist

    1 week ago

    Aerotek Solon, United States

    **Description:** · • Work with supporting services to develop new machining processes and programs according to specifications. · • Prove out new processes and help perform capability studies for new machines / processes · • Work with engineering and vendors to complete tooling t ...

  • FEMC

    CNC Machinist

    1 week ago

    FEMC Bedford Heights, OH, United States

    We are seeking a skilled and experienced CNC Machinist to join our team. The ideal candidate will have a strong background in operating and programming CNC machines, with proficiency in interpreting technical drawings and blueprints. As a CNC Machinist, you will be responsible fo ...

  • FEMC

    CNC Machinist

    1 week ago

    FEMC Bedford, United States

    FEMC's machine shop produces a low volume of a high mix of parts. The majority of prints are quantities of 1-10. · We are seeking a skilled and experienced CNC Machinist to join our team. The ideal candidate will have a strong background in setting up and operating CNC machines ...

  • Custom Materials Inc

    cnc machinist

    1 week ago

    Custom Materials Inc Chagrin Falls, United States

    Established in 1964, Custom Materials, Inc. is a proven source for the custom fabrication of electrical insulation and components. We personally serve major manufacturers and suppliers of electrical power generation equipment, distribution equipment, and controls. Components rang ...

  • Custom Materials Inc

    cnc machinist

    5 days ago

    Custom Materials Inc Chagrin Falls, United States

    Established in 1964, Custom Materials, Inc. is a proven source for the custom fabrication of electrical insulation and components. We personally serve major manufacturers and suppliers of electrical power generation equipment, distribution equipment, and controls. Components rang ...

  • Professional Placement Services

    CNC Machinist

    2 weeks ago

    Professional Placement Services Bedford, United States

    PPS is seeking a FULL TIME PERMANENT CNC Machinist for our industry-leading metal fabrication shop. This is a 1st Shift position with benefits and a highly competitive pay rate · Responsibilities to Include: · Setup / Operate CNC Machining Center · Familiar with Tooling · Abi ...

  • Aerotek

    CNC Machinist Operator

    1 week ago

    Aerotek Solon, United States

    **Job Title:** CNC Machinist**Shift:** 2nd (3p-11p) ($2 shift premium)**Pay:** 19/hr to 26/hr**Location:** Solon, OH**Job Description:**-Operate machinery and move materials (physically or with equipment) to machine materials based on pre-set programs or settings-Changing out too ...

  • Custom Materials Inc

    cnc machinist

    1 day ago

    Custom Materials Inc Chagrin Falls, United States

    Job Description · Job DescriptionDescription:Established in 1964, Custom Materials, Inc. is a proven source for the custom fabrication of electrical insulation and components. We personally serve major manufacturers and suppliers of electrical power generation equipment, distribu ...

  • PPS-HPS

    CNC Machinist

    1 week ago

    PPS-HPS Bedford, United States

    Job Description · Job DescriptionPPS is seeking a FULL TIME PERMANENT CNC Machinist for our industry-leading metal fabrication shop. This is a 1st Shift position with benefits and a highly competitive pay rate · Responsibilities to Include: · Setup / Operate CNC Machining Center ...

  • Industrial Mold & Machine

    CNC Machinist

    1 day ago

    Industrial Mold & Machine Twinsburg, United States

    Job Description · Job Description**NOW HIRING - 1ST SHIFT CNC MILL MACHINIST** · Pay Range: $ / hour please · Schedule: · Monday-Friday: 6:00 am up to 2:30 pm and Saturday as needed. Employee must be available to work overtime. · We are a full service manufacturer of high toleran ...

  • Custom Materials Inc

    cnc machinist

    1 day ago

    Custom Materials Inc Chagrin Falls, United States

    Job Description · Job DescriptionDescription:Established in 1964, Custom Materials, Inc. is a proven source for the custom fabrication of electrical insulation and components. We personally serve major manufacturers and suppliers of electrical power generation equipment, distribu ...

  • Industrial Mold & Machine

    CNC Machinist

    1 day ago

    Industrial Mold & Machine Twinsburg, United States

    **NOW HIRING - 1ST SHIFT CNC MILL MACHINIST** · Pay Range: $ / hour please · Schedule: · Monday-Friday: 6:00 am up to 2:30 pm and Saturday as needed. Employee must be available to work overtime. · We are a full service manufacturer of high tolerance innovative molds for many ...

  • Phantom Staffing

    CNC Machinist

    1 week ago

    Phantom Staffing Beachwood, United States

    About the job CNC Machinist - 3rd Shift Responsibilities · •Plans for each days machining by studying blueprints, engineering plans, and materials. · •Analyzes information and finds the best solutions to problems. · •Programs CNC mills and lathes by entering instructions, includi ...

  • Phantom Staffing

    CNC Machinist

    5 days ago

    Phantom Staffing Beachwood, United States

    About the job CNC Machinist - 3rd Shift · Responsibilities · •Plans for each days machining by studying blueprints, engineering plans, and materials. · •Analyzes information and finds the best solutions to problems. · •Programs CNC mills and lathes by entering instructions, i ...

  • Aerotek

    CNC Machinist

    1 week ago

    Aerotek Bedford, United States

    **Description:****$19-23/hr****2nd and 3rd shift** · • Work with supporting services to develop new machining processes and programs according to specifications. · • Prove out new processes and help perform capability studies for new machines / processes · • Work with engineering ...