Lead Mechanic - Huntington, United States - Live Oak Environmental - Maintenance

Live Oak Environmental - Maintenance Huntington, United States

1 week ago

Description

Job Description

Reporting to a Maintenance Supervisor or Maintenance Manager.

Maintenance Lead Mechanic/Technician provides direction to a group of technicians to ensure that all repairs and maintenance of equipment are performed in compliance with the Company's safety standards and applicable federal and state regulations. The Maintenance Lead Mechanic/Technician is responsible for all chassis (diesel and non-diesel equipment and trucks) and refuse bodywork, including, but not limited to, hydraulic, electrical, heating and air conditioning system maintenance and repair.

In addition, the Lead Mechanic/Technician diagnoses more complicated repair work; provides coaching on diagnostic techniques to subordinate technicians; performs external repair inspections to ensure all repair work is done in a safe manner; and schedules the repair work for his or her work group to ensure that all repair and maintenance work is done in a safe and timely manner, reducing lost productivity within the shop.

Compensation:

$40 hourly

Responsibilities:

Maintains expert knowledge of, and advanced working proficiency in, the following vehicle components and systems, with the ability to perform complex repair maintenance functions, both on-site and on the road, Chassis component repair and maintenance; Refuse bodies, including control, hydraulic and electrical systems
Air and hydraulic braking systems
Engine repair and maintenance, Suspension, drivetrain and steering systems
Heating and air conditioning systems
Performs line maintenance welding and fabrication
Provides direction to technicians assigned to his or her work group to ensure that all repair and maintenance work is performed in a safe, efficient and timely manner. May plan and schedule repair work to minimize lost productivity
Inspect repairs done by a third-party vendor to ensure all work has been properly completed in accordance with the Company's safety procedures and federal and state regulations; follow up when necessary
Performs repair diagnostics on more complex matters
Identifies the source of malfunctions using a variety of electronic tools
Completes applicable Company training programs
Handles Maintenance Supervisor responsibilities, as needed
Acts as a mentor to technicians
Performs other job-related duties as assigned or apparent

Qualifications:

Ability to perform inspections and repairs without supervision in some (not all required) of the following heavy truck, automotive systems Suspensions, Steering, General Engine, Transmissions, Brakes, Electrical, Hydraulics, Drive Train, and Diesel Emissions
At least 3 years of experience in a role requiring compliance with OSHA Haz Com, OSHA Lock Out Tag Out, and all OSHA fire protection regulations is a plus but not required
At least 1 year of supervisory or lead technician experience is a plus but not required
ASE Heavy Truck Certifications (T1-T8) are a plus but not required
Valid Driver's License

MINIMUM REQUIREMENTS:

At least 3 years of experience as a technician working on heavy-duty trucks

About Company

Our company leaders have more than 70 years of combined experience in the waste services and trucking industries. Through the in-depth knowledge and experience our team has accumulated, we've gained unique insights into how to bring both higher-quality service and greater value to our customers.

Benefits:

401(k)
401(k) matching
Dental insurance
Health insurance
Life insurance
Paid time off
Vision insurance

Schedule:

10-hour shift
Day shift
Evening shift
Night shift
Overtime
Weekends as needed

That's why we started Live Oak Environmental: to provide better, long-term environmental waste solutions to our neighbors. Simply put, we think you deserve better, and we're committed to delivering it. From curbside to small business to industrial scale, our goal is to provide reliable, world-class waste services at a fair price while maintaining the strong ethic and personal attention of a local business.

Lead Heavy Duty Mechanic

3 days ago

Live Oak Environmental - Huntington Huntington, United States

Job Description · Job DescriptionLead Mechanic/Technician Job Description in Huntington, TX, US · Role Overview: · Reports directly to a Maintenance Supervisor or Manager and provides guidance to technicians for ensuring equipment repairs comply with safety standards and regulati ...
Lead Heavy Duty Mechanic

6 days ago

Live Oak Environmental - Maintenance Huntington, United States

Job Description · Job DescriptionLead Heavy Duty Mechanic Job Description in Huntington, TX, US* Responsible for providing guidance to a team of technicians to ensure equipment repairs and maintenance meet safety standards and regulations.* Handles all chassis and refuse bodywork ...
Lead Mechanic

6 days ago

The Irvine Company, LLC Newport Coast, United States

Job Duties: Assist the Equipment Manager or does work overhauling and repairing automotive/powered equipment. Secures and replaces tools and parts. Maintain a clean and organized shop area. Assists in electric gas welding, lubricates and services aut Mechanic, Equipment Manager, ...
Lead Mechanic

1 week ago

Athens Services La Puente, United States

Summary · Looking to advance your career? Athens Services is currently seeking a Lead Mechanic to join our team. As the primary specialist responsible, for identifying and resolving technical problems in diesel and CNG fleets your role is crucial to our operations. You'll be tas ...
Lead Mechanic

4 days ago

Athens Services Baldwin Park, United States

SummaryThe Shop Lead reports directly to the Fleet Maintenance Supervisor and is responsible for the management and leadership of the fleet maintenance operations. The Shop lead will work closely with fleet maintenance leadership to ensure that all shop employees comply with all ...
Lead Mechanic

1 week ago

AMR Corp. Inglewood, United States

Located in Moorpark, CAMore Information about this Job: Ventura County, CA (Moorpark) Lead Mechanic - Immediately Hiring Full-Time Opportunity in Moorpark, CA $ $42.00 Hourly DOE SUMMARY: Assists Fleet Maintenance Manager in daily operation of Fleet Maintenance Facility while per ...
Compound Technician I

1 week ago

Newlight Technologies Inc Huntington Beach, United States

The compound Technician is responsible for preparing batches for material production. This consists of accurate weighing, checking, and mixing of specific chemical compounds for product formulations, as well as operating and monitoring state-of-the-art equipment in accordance wit ...
Set Up Technician I

18 hours ago

Cambro Manufacturing Company Huntington Beach, United States

WORK SHIFT: · Second Shift (United States of America) · JOB DESCRIPTION: · Set-Up Tech I is responsible for performing the complete mold change process including; mold/supply preparation in advance, mold removal, mold installation, robot and secondary equipment set-up, clean up, ...
Mechanical Assembly Lead

1 week ago

Meggitt Defense Systems Irvine, United States

Tracking Code : · Job Description · : · JOB SUMMARY Responsible for the direction of production assembly of components and assemblies of a moderate degree of complexity, requiring on the part of the assemblers good dexterity with hand tools and the ability to work to moderately c ...
Lead Vehicle Mechanic

1 week ago

Clean Harbors Gardena, United States

Job Description · Clean Harbors is seeking a Lead Diesel Vehicle Mechanic for our hub in Newark, CA. As a Lead Vehicle Diesel Mechanic, You will be responsible for conducting routine maintenance and repair on our company fleet, which includes both heavy and light duty vehicles. D ...
Lead A&P Mechanic

4 days ago

Kalitta Air, LLC Los Angeles, United States

Job Description · Job DescriptionJOB DESCRIPTION · Job Title: Lead A&P Mechanic (LAX) · Department: LAX Station · ReportsTo : Station Manager · ESSENTIAL DUTIES AND RESPONSIBILITIES: · Duties and responsibilities include, but are not limited to: · Coordinate with the Supervisor f ...
Mechanical Design Engineer, Lead

1 week ago

Rockley Photonics Irvine, United States

SUMMARY · Rockley is looking for a Lead Mechanical Design Engineer with robust medical device experience in a start-up environment to be part of our team. Rockley is developing a new wrist-worn wearable device for cardiovascular sensing. Together with a close-knit team, you will ...
Lead A&P Mechanic

1 week ago

Kalitta Air Los Angeles, United States

JOB DESCRIPTION · Job Title: Lead A&P Mechanic (LAX) · Department: LAX Station · ReportsTo : Station Manager · ESSENTIAL DUTIES AND RESPONSIBILITIES: · Duties and responsibilities include, but are not limited to: · Coordinate with the Supervisor for the scheduling and assignment ...
Quality Manager

6 days ago

Design Catapult, Inc. Fountain Valley, United States

**Job Title: Quality Assurance Manager** · **Department: Quality Assurance** · **Exempt/Non-Exempt: Exempt** · **Job Summary**: · Design Catapult Manufacturing, Inc. produces products and systems that range from relatively simple fabricated items to more complex electro-mechanica ...
Lead Consultant, Mechanical Engineering

1 week ago

WSP Global Inc. Irvine, United States

This Opportunity · WSP's · Sacramento Engineering Group · has an immediate opening for a highly experienced · Lead Mechanical engineer · with years in the field of Heating Ventilation and Air Conditioning to support design and construction activities on major infrastructure ...
Automotive Manager in Training

4 days ago

American Tire Depot Fountain Valley, United States

As an Automotive Manager in Training, you will get experience working in multiple departments within the business. This will help you gain a deep understanding of our processes, best practices, and winning strategy; giving you an opportunity to become a manager in our company. · ...
Lead Mechanical Design Engineer

2 weeks ago

Canon Recruiting Group Irvine, United States

POSITION: Mechanical Design Engineer, Lead (Principle/Sr. Staff/Staff) · FULLTIME/PARTTIME: Full time, DIRECT HIRE · LOCATION: Irvine, CA · SALARY: Up to $180k/year · (Exact compensation may vary based on skills, experience, and location. Base pay information is based on mark ...
Group Lead, Mechanical Engineering

1 week ago

IPS-Integrated Project Services, LLC Irvine, United States

Job Description: · At IPS, you will apply your knowledge, skills, and passion to make a difference in the lives of people by solving complex challenges related to pharmaceutical, biotech, and animal health research and manufacturing facilities. We are looking for a dedicated Gro ...
Environmental Technician

1 week ago

Orange County Sanitation District Fountain Valley, United States

**Description**: · - What do **you **value in your next job? · At the **Orange County Sanitation District **our **Core Values **form the framework of our organization and reinforce our professional work ethic. If the following values ring true with you, we'd love to invite you to ...
Technical Lead Mechanic

3 weeks ago

BlueTriton Brands Los Angeles, United States Full time

BlueTriton is a leading provider of spring and purified water products - the name behind your favorite bottled water brands. We are proud to offer an extensive portfolio of highly recognizable, responsibly sourced, and sustainably packaged spring water in addition to other qualit ...