- Other duties may be assigned.
- Demonstrate ability to recognize and explain the function (including controls, mechanical devices, tooling components and auxiliaries) of the type of presses found in the facility.
- Demonstrate an expert working knowledge of material/part conformance standards and basis SPC recording techniques.
- Demonstrate leadership qualities and communication skills.
- Foster an environment of continuous learning and process improvement.
- Understand basic principles of machining, electricity/electronics, mechanical technology, metallurgy, material handling, and/or power systems.
- Demonstrate ability to maintain a clean and orderly work area in compliance with facility housekeeping policies.
- Demonstrate ability to use prints, charts, technical drawings, and/or schematics.
- Perform basic corrective or preventive maintenance.
- Must be able to recognize equipment problems and adverse material conditions.
- Demonstrate an expert understanding of metal stamping processes and auxiliaries such as coil-fed, manual feed, coining operations, embossing, forming, blanking, piercing, and/or drawing.
- Show familiarity in the use of calipers, micrometers, scales/tape measure, verniers, squares, speciality gages, protractor, sight gages, attribute and fixture gages.
- Be able to inspect and prepare work station.
- Prepare die for installation.
- Set-up press and install die.
- Request and verify raw material/stock.
- Prepair and adjust uncoiler (coil fed only).
- Prepare and adjust straightener (coil fed only).
- Prepare and adjust feeder.
- Start, stop and restart equipment.
- Make a quality piece part.
- Produce parts (operate equipment).
- Be familiar with all safety features and requirements for the safe operation of equipment/machinery.
- Understands and enforces all safety rules and environmental procedures in plant.
- EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.
- LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
- MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
- REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
- CERTIFICATES, LICENSES, REGISTRATIONS Fork Lift operators license.
- PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to walk; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee is occasionally required to sit. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.
- WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, and risk of electrical shock. The noise level in the work environment is usually loud.
-
Die Setter
2 weeks ago
Branex Group Auburn Hills, United StatesJob Description · Job DescriptionEssential Functions: · Include the following. Must be able to do full rotation. Other duties may be assigned. · Change molds in presses for production or sample requirements in a safe, neat, efficient manner (including proper PPE when required). ...
-
Die Setter
3 weeks ago
Workbox Staffing Lake Orion, United StatesJob Description · Job DescriptionDie Setter, Up to $25/hour, Lake Orion, MI · We are seeking a hardworking reliable Die Setter to join a company that is eager to invest in the right candidate In this position you will have the opportunity to learn how the critical role the Die Se ...
-
Die Setter 1st Shift
3 days ago
US Farathane Auburn Hills, United StatesUS Farathane is seeking an experienced Die Setter. The Die Setter is directly responsible for the machine set-ups including primary and secondary equipment both scheduled and unscheduled. This role is on 1st shift which runs 7:00am - 3:00pm · US Farathane has been a leading so ...
-
Die Setter
2 weeks ago
Qualified Staffing Lapeer, United StatesJob Description · Job DescriptionCome work for an established manufacturer of high-end emblems, grilles, and decorative trim for the automotive industry. Lapeer area manufacturer is looking for Die Setters to join their team. This is a 2nd Shift position, Mon-Fri, 2PM-10PM. Pay i ...
-
Die Setter
1 week ago
Lapeer Plating & Plastics Inc Lapeer, United StatesJob Description · Job DescriptionLapeer Plating & Plastics, Inc., The Premier Manufacturer of Class A, High-Visibility Automotive Components, is seeking highly motivated, team players, possessing a continuous improvement mindset, to join our team as Injection Molding Die Setters. ...
-
Die Setter
1 day ago
Magna International Sterling Heights, United StatesLocate die, associated tooling & gauging and proper material for job set up. Responsible for continuously improving the process or changeover to reduce the time it takes for changeovers. Keep die racks and finger bar racks neat, clean and organized. Press Operator, Equipment, Man ...
-
Die Setter
4 weeks ago
Qualified Staffing Search Group Lapeer, United StatesCome work for an established manufacturer of high-end emblems, grilles, and decorative trim for the automotive industry. Lapeer area manufacturer is looking for Die Setters to join their team. This is a 2nd Shift position, Mon-Fri, 2 PM-10 PM. Pay is 2nd Shift, Staffing, Manufact ...
-
Die Setter
3 weeks ago
G.Z.Q.S.O. Sterling Heights, United StatesJob Description · Job DescriptionJob Title: Die Setter - DIRECT HIRE · Location: Sterling Heights ( 18 mile road) · Shift: 2rd, (Mon-Friday) 2:00 p.m- 11 p.m. (Weekends and OT depend on production needs) · Shift: 3rd (Mon-Friday) 9:00 p.m. - 6 a.m. (Weekends and OT depend on prod ...
-
Die Setter
4 days ago
Magna International Inc. Sterling Heights, United StatesJob Number: 67304 · Group: Magna Powertrain · Division: MPT Sterling Heights · Job Type: Permanent/Regular · Location: STERLING HEIGHTS · Work Style: · About us · We see a future where everyone can live and move without limitations. That's why we are developing technologies ...
-
Die Setter 2nd
6 days ago
Flex-N-Gate Royal Oak, United StatesFlex-N-Gate is a leading manufacturer and supplier of components for the automotive industry, recently ranked 10th of the 150 Top North American Suppliers in "Automotive News." A growing and vital company, Flex-N-Gate provides a great opportunity for hard-working and skilled indi ...
-
Tool and Die Setter
1 week ago
Alpha USA Livonia, United StatesJob Description · Job DescriptionJob Description: · Must have basic computer skills and navigation · Assembles, installs, and aligns dies in press according to specifications · Starts press and observes operation to detect misalignment or malfunction · Inspects parts for conforma ...
-
Die setter(press operator)
1 week ago
Randstad Madison Heights, United StatesWe are seeking an experienced die-setter Do you have experience working in a machine shop? Do you have experience working in press operations? This is a temp-to-hire position that offers competitive pay and growth. Please apply if you are interested in working for us in Madison H ...
-
Die setter(press operator)
2 weeks ago
Randstad Madison Heights, United StatesWe are seeking an experienced die-setter Do you have experience working in a machine shop? Do you have experience working in press operations? This is a temp-to-hire position that offers competitive pay and growth. Please apply if you are interested in working for us in Madison H ...
-
DIE SETTER(Press Operator)
2 weeks ago
Randstad North America, Inc. Madison Heights, United StatesWe are seeking an experienced die-setter Do you have experience working in a machine shop? Do you have experience working in press operations? This is a temp-to-hire position that offers competitive pay and growth. Please apply if you are interested Press Operator, Operator, Punc ...
-
Die Setter 2nd Shift
3 weeks ago
Autokiniton Detroit, United States OTHERDie Setter · We are AUTOKINITON (pronounced auto-ken-i-TAHN) · AUTOKINITON delivers operational excellence, high-quality execution, and customer service. We offer 100% vertical integration capabilities such as end-to-end engineering, manufacturing, and in-house logistics. · We'r ...
-
Die Setter 1st Shift Up to $30/hr Canton
3 weeks ago
Gold Standard Staffing Canton, United StatesJob Description · Job DescriptionSee all of our positions at · Job Title: Die Setter · Pay Rate: Up to $30.00 depending on experience · Shift: 7a-330p 1st day orientation starts at 8:30am · Type of Placement: Temp to Hire. · Description/Duties/Responsibilities: Die setter needed ...
-
Process Technician-2nd Shift
1 week ago
US Farathane Auburn Hills, United StatesUS Farathane is seeking an experienced Process Technician for 2nd shift at our Auburn Hills facility . This position is directly responsible for ensuring that all machines are running and all processes are in control and running to standard at all times. US Farathane has been a ...
-
Mold Setter
2 days ago
Spark Talent Inc Rochester Hills, United StatesJob Description · Job DescriptionJob Title: Mold Setter (Direct Hire) · About the job: Responsible for performing set ups of multi-cavity and multi-shot injection molds. When necessary, assists other team members on the production floor with machine startups. · Roles and responsi ...
-
Press Operator
1 week ago
PGK Services Rochester, United StatesJob Title: Automatic Press OperatorPosition Summary: To operate a stamping press that automatically stamps parts in a continuous method. Essential Duties And Responsibilities: (To include but not be limited to): - Be able to operate the Automatic Press with a transfer. - Be able ...
-
Press Operator
1 week ago
PGK Services Rochester, United StatesJob Title: Automatic Press Operator · Position Summary: To operate a stamping press that automatically stamps parts in a continuous method. · Essential Duties And Responsibilities: (To include but not be limited to): · - Be able to operate the Automatic Press with a transfer. ...
Die Setter - Auburn Hills, United States - Ralco Industries
4 weeks ago
Description
Job Type
Full-time
Description
ESSENTIAL DUTIES AND RESPONSIBILITIES
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
$23-$24/hour depending on experience