- Reviews and responds to department cost of defects (COD) data on a daily, weekly, and quarterly basis.
- Updates and reviews control charts, control limits, and process control cookbooks.
- Updates, reviews and controls SPC charts.
- Monitors and controls incoming raw materials, purchase specifications, as well as audit plans andreports.
- Reviews, monitors and controls process tools. (Machines, racks, tanks, spec. tools.)
- Collects, processes, mines, and interprets data and implements improvements based on analysis.
- Writes work instructions, procedures and techniques.
- Designs and oversees process experiments to determine the causes of defects and identify betterprocess methods and raw materials.
- Improves measurements and capabilities for raw materials, input variables, process yields, and response variable using statistical process control (SPC) and never ending improvement (NEI) methods. Focuses on key department metrics such as scrap, rework, and process yield.
- Improves the use and integration of SPC tools and techniques to improve process predictability.
- Conducts gauge repeatability and reproducibility studies to correct gauge error greater than 30%.
- Discusses and improves design issues, procedures, and techniques with departmental supervisor andproduct engineer.
- Reviews and controls process parameters.
- Reviews part set-ups/gating designs and works with product engineers to eliminate variability.
- Identifies and addresses safety considerations within the scope of the job/area responsibilities.
- Specifies and justifies major equipment purchases and building modifications.
- Bachelor's Degree in Engineering or 5 years of training or experience.
- Able to work in a production environment.
- Able to read and comprehend English.
- Able to work with mathematical concepts such as probability and statistical inference, and plane and solid geometry and trigonometry. Able to apply concepts of fractions, percentages, ratios and proportions to practical solutions.
- Able to communicate effectively with co-workers and customers.
- Able to effectively present information to management and customers.
- Able to define problems, collect data, establish facts, and draw valid conclusions. Able to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
- Able to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
- Able to write reports, business correspondence, and procedure manuals.
- Vision expectation is Jaeger J1 in one eye, at no less than 12 inches; or equivalent, or Jaeger J2 in one eye, at no less than 16 inches.
- Able to use Microsoft Office applications.
- Complies with company and departmental policies and procedures, including company's attendance policy.
- Solid Modeling experience.
- Broad knowledge of mechanical, industrial, and materials science engineering along with investment casting technology.
-
Process Engineer
1 week ago
Autoliv United States Ogden, United StatesJob Description · Job DescriptionProcess Engineer Join Autoliv, a global leader in automotive safety, as a Process Engineer at our Ogden, UT facility, and help us in our mission to save lives. With our cutting-edge technology, you'll be at the forefront of creating the safest aut ...
-
Process Engineer
1 week ago
Autoliv United States Ogden, United StatesProcess Engineer · Join Autoliv, a global leader in automotive safety, as a Process Engineer at our Ogden, UT facility, and help us in our mission to save lives. With our cutting-edge technology, you'll be at the forefront of creating the safest automotive solutions for million ...
-
Process Engineer
1 week ago
Precision Castparts Corp Ogden, United StatesResponsible for determining operations to produce product and develop processes to ensure quality, increase productivity, and reduce cycle time and scrap.Principle Duties and Responsibilities: Process ControlReviews and responds to department cost of defects (COD) data on a daily ...
-
Process Engineer 2
6 days ago
Precision Castparts Corp Ogden, United StatesCountry · United States of America · State / County · Utah · City · Ogden · Division · Structurals · Company · Ogden · Function · Engineering · Workplace Type · On-Site · Position type · Full Time · Opportunity ID · 13503 · Company Profile · With more than 120 operations and appr ...
-
Process Engineer 2
3 days ago
Precision Castparts Corp Ogden, United StatesPrimary Function: Responsible for determining operations to produce product and develop processes to ensure quality, cost, increase productivity, and reduce cycle time, and scrap. · Principle Duties and Responsibilities: · Process ControlWrites work instructions, procedures an ...
-
Metallurgic Process Engineering Manager
3 weeks ago
Your Talent Source LLC Ogden, United StatesMetallurgic Process Engineering Manager · Our client is looking for a Metal/Forging Process Engineering Manager for their heavy industry operation in the greater Ogden, UT area. · Experience Requirements: · BS degree in Mechanical Engineering (Metallurgical, Material Science & ...
-
Process Safety Coordinator-Chemical Engineer
1 week ago
Westinghouse Electric Company Ogden, United StatesProcess Safety Coordinator/ Chemical Engineer CONTRACT 6 months Ogden Utah Hybrid or Remote Energize your career with Westinghouse Electric Company Our commitment to safe, clean nuclear energy is second to none, and were proud of our rich heritage Chemical Engineer, Coordinator, ...
-
Manufacturing/Process Engineer
4 weeks ago
ES3 Clearfield, United StatesJob Description · Job DescriptionGENERAL SUMMARY: · ES3 is currently recruiting a Manufacturing and Process Engineer to support our Manufacturing and Special Processes at our Materials Research and Development Center (MRDC) located in Clearfield, Utah. The accepted candidate will ...
-
Crimson Enterprises Ogden, United StatesAbout the Company · We are a growing IT business consulting company with core expertise in the future market of Industry 4.0/Digital Factory. Our focus is on further developing the integration and networking of customers to implement the concept of the Digital Factory. With regar ...
-
Process Engineer
3 days ago
BlueNova Industries Davis, United StatesProcess Engineer (m/f/d) for internationally operating family-owned company · We are a successful medium-sized family-owned company that produces unique specialty waxes worldwide. These multifunctional products are primarily used in the specialty plastics industry. With a long tr ...
-
Senior Mechanical Engineer
10 hours ago
Westinghouse Electric Company LLC. Ogden, United StatesAre you interested in being part of an innovative team that supports Westinghouse's mission to provide clean energy solutions? At Westinghouse, we recognize that our employees are our most valuable asset and we seek to identify, attract and recruit the most qualified talent while ...
-
Electrical Engineer
5 days ago
DCS Corp Ogden, United StatesDCS Corp has an exciting opportunity for an Electrical Engineer to support the Aerospace Dominance Enabler Division (AFLCMC/HBZ)at Hill AFB in Ogden Utah . · HBZ functions as the Air Force's technical, acquisition and sustainment experts providing unique and comprehensive supp ...
-
Modeling & Simulation Developer
3 weeks ago
SPA Ogden, United States Full timeQualifications · Required Qualifications: · 5+ years of demonstrated experience in engineering or management support of defense systems, technology, or research and development activities. · A Bachelor's degree or higher in: Aerospace, Mechanical, Electrical, or Software Engineer ...
-
Senior Design Engineer
23 minutes ago
Spherion Utah Ogden, United StatesThe Design Engineer will manage the company product drawing, and product/ material specification process including: Review, validation, and approval of current Customer and Supplier product drawings and new product drawings. · Responsibilities: · Modify and update current produc ...
-
Engineer in Training
3 weeks ago
Oldcastle Infrastructure Ogden, United StatesOldcastle InfrastructureTM, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We're more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We're ...
-
Modeling & Simulation Developer
5 days ago
Systems Planning and Analysis Ogden, United StatesOverview · Systems Planning and Analysis, Inc. (SPA) delivers high-impact, technical solutions to complex national security issues. With over 50 years of business expertise and consistent growth, we are known for continuous innovation for our government customers, in both the US ...
-
Mechanical Engineer
3 weeks ago
Bechtel Corporation Ogden, United StatesPosition Summary · This position is for a Mechanical Engineer who will prepare designs for mechanical systems associated with DOD and USAF projects. The successful candidate must have strong organizational and teamwork skills, proven problem-solving abilities, can-do attitude, an ...
-
Principal or Sr Mechanical Engineer
2 weeks ago
Oshkosh Ogden, United States Full timeAbout Oshkosh AeroTech, an Oshkosh company · Oshkosh AeroTech is a leading provider of aviation ground support products, gate equipment and airport services to commercial airlines, airports, air-freight carriers, ground handling and military customers. Oshkosh AeroTech offers pr ...
-
Plant Improvement Manager
3 weeks ago
Oldcastle Infrastructure Ogden, United StatesOldcastle InfrastructureTM, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We're more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We're ...
-
Information Assurance
4 weeks ago
General Dynamics Information Technology Ogden, United StatesThe Information System Security Engineer (ISSE) is primarily responsible for conducting information system security engineering activities with a focus on lifecycle of current systems and future requirement scoping. The position will collect and process the captured information s ...
Process Engineer - Ogden, United States - Precision Castparts Corp
Description
CountryUnited States of America
State / County
Utah
City
Ogden
Division
Structurals
Company
Ogden
Function
Engineering
Workplace Type
On-Site
Position type
Full Time
Opportunity ID
13503
Company ProfileWith more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.
PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.
In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.
Job DescriptionResponsible for determining operations to produce product and develop processes to ensure quality, increase productivity, and reduce cycle time and scrap.
Principle Duties and Responsibilities:
Process Control
Reduce Variability (Continuous Improvement)
Minimum Job Requirements:
Desired Competencies:
The above statements are intended to describe the general nature and revel of work being performed. They are not intended to be an exhaustive list of all duties, responsibilities, and skills.
Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or other status protected by applicable law.
This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.
