- Load correct coil onto line.
- This operation must be completed in an efficient manner so that the furnace operator is not required to slow the line speed down.
- Safety shoes
- Safety glasses
- Hearing protection
- Work in compliance with the Occupational Health and Safety Act and regulations.
- Clean, well ventilated and safe work areas.
-
AP Entry/Welder Operator
3 weeks ago
North American Stainless Ghent, United StatesJob Description · Job DescriptionGENERAL JOB DESCRIPTION: · This position of AP Cold (Exit/Trim) Operator is responsible for all operating functions as listed below. Operation of the AP Cold Unit must be understood in total with the focus of utilizing the equipment to meet all th ...
-
Forklift Operator
4 days ago
ResourceMFG Ghent, United Statessummary ResourceMFG is immediately hiring for Forklift Operator Entry Level Location: Lafayette, IN Shift:6:00am-6:00pm OR 6:00pm-6:00am Pay starts:$17.50-$18.38, potential for raises at 90 and 120 days Training Required on 8-hour days for up to 6 weeks (7am-4pm) Work Environment ...
-
CM Crane Operator
1 day ago
North American Stainless Ghent, United StatesJob Description · Job Description all operating function of all cranes located in the Cold Mill. Operation of the crane must be understood in total with the focus of utilizing the equipment to meet all the quality and productivity goals as outlined in our quality system. All work ...
-
Pickling Exit Operator
3 weeks ago
North American Stainless Ghent, United StatesJob Description · Job DescriptionGENERAL JOB DESCRIPTION: · The Pickling Exit Operator is responsible for all the functions as listed below. Operation of this area must be understood in total with the focus of utilizing the equipment to meet all the quality and productivity goals ...
-
Mechanical Maintenance
3 weeks ago
Nucor Corporation Ghent, United StatesJob DetailsDivision: Nucor Steel Gallatin LLCLocation: Ghent, KY, United States Other Available Locations: N/ABasic Job Functions:This position will be responsible for assuring that all production equipment is maintained.Responsibilities include but are not limited to: Troublesho ...
-
AP Exit Operator
3 weeks ago
North American Stainless Ghent, United StatesJob Description · Job DescriptionThe position of AP3 vacation coverage operator is responsible for all operating functions as listed below. Operation of the AP3 Unit must be understood in total with the focus of utilizing the equipment to meet all the quality and productivity goa ...
-
Mechanical Maintenance
2 weeks ago
Nucor Corporation Ghent, United StatesJob Details · Division: Nucor Steel Gallatin LLC · Location: Ghent, KY, United States · Other Available Locations: N/A · Basic Job Functions: · This position will be responsible for assuring that all production equipment is maintained. · Responsibilities include but are not ...
-
HM Floor Operator
3 weeks ago
North American Stainless Ghent, United StatesJob Description · Job DescriptionThe position of Mill Floor Operator is responsible for the · operation of all Furnace Delivery, Roughing Mill, Finishing Mill, · down coiler and plate line equipment at the floor level in order · to obtain the proper levels of quality and producti ...
-
QC Engineer
5 days ago
North American Stainless Ghent, United StatesGENERAL JOB DESCRIPTION: · This position is responsible for providing professional quality engineering service and technical support involving · technical quality, in-process quality, and customer service. Supports NAS total quality program to improve cost, · productivity, yie ...
-
QC Engineer
3 days ago
North American Stainless Ghent, United StatesJob Description · Job DescriptionGENERAL JOB DESCRIPTION: · This position is responsible for providing professional quality engineering service and technical support involving · technical quality, in-process quality, and customer service. Supports NAS total quality program to imp ...
-
Industrial Complex Security Officer
1 week ago
Ohio Support Services Ghent, United States$16.00 per hour · Candidates should... Present a neat and well-groomed appearance. · Possess excellent customer service skills (e.g. courtesy, patience, understanding, etc.). · Good computer skills, including the following: able to use a keyboard to correctly input information ...
-
Employee: 3-S-Center
2 weeks ago
Infinity Enterprises Campbellsburg, United StatesWe are looking for motivated employees for over 500 different professions. And that's all over Germany. Whether experienced professionals or career starters - we offer numerous entry and further training opportunities. · At the earliest possible date, we are looking for you as an ...
-
Civil/Structural Design Engineer
3 weeks ago
Dow Carrollton, United StatesAt Dow, we believe in putting people first and we're passionate about delivering integrity, respect and safety to our customers, our employees and the planet. · Our people are at the heart of our solutions. They reflect the communities we live in and the world where we do busine ...
-
Transportation Dispatch Coordinator
3 weeks ago
Ryder System Hebron, United StatesJob Seekers can review the Job Applicant Privacy Policy by clicking HERE. ) · We are immediately hiring a Dispatch Coordinator in Hebron, KY, to support Ryder's Supply Chain Solutions division. Apply here today to speak with a Recruiter about the position and perks of Jumpstartin ...
-
Fabrication Welder
15 hours ago
Aerotek Florence, United States**Job Title: Fabrication Welder****Job Description**In this role, the successful candidate will maintain a safe and healthy work environment, read and interpret blueprints, select and align parts according to specifications, and weld parts to specific tolerances. You will also be ...
-
Customer Service Representative
5 days ago
Cowan Systems Union, United States**Customer Service Representative** · **Department:** Operations **Location:** Cincinnati, OH · **Customer Service Representative** · The **Customer Service Representative** performs in a customer service and general administrative capacity for all departments in the operation ...
-
Sherwin-Williams Union, United StatesThe Sherwin-Williams Floorcovering Management & Sales Training Program is an accelerated, entry-level position designed to prepare you for a Floorcovering Facility Management or Sales Representative role in 18-24 months. With Sherwin-Williams promot Training, Field Technician, Op ...
-
Trauma Center Registry Supervisor
6 days ago
University of Cincinnati Health Union, United StatesTrauma Center Registry Supervisor, Full-time UC Health is hiring a Registry Supervisor to join on Trauma Center on a full-time basis. The Registry Supervisor oversees all components of Trauma Registry operations, including data collection, data entry Trauma, Supervisor, Healthcar ...
-
Formulation Technician I
2 weeks ago
Thermo Fisher Scientific Union, United StatesJob DescriptionAs part of the Thermo Fisher Scientific team, you'll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner and safer ...
-
Assembly Worker
1 week ago
US Main Walton, United StatesPosition type: Full Time, Contract Duration: 6 Months to possible hire Location: Walton, KY 41094 Shift: 1st Job Summary: Operate light-duty bench or floor-type machine tools and equipment. Maintain raw material inventory for Machine Shop. Duties: Perform basic machine tasks such ...
BA Entry/Welder Operator - Ghent, United States - North American Stainless
Description
Job Description
Job DescriptionThe position of BA Entry/Welder Operator is responsible for all operating functions as listed below. Operation of the BA Unit must be understood in total with the focus of utilizing the equipment to meet all the quality and productivity goals as outlined in our quality system. All work instructions must be followed as outlined.
ESSENTIAL JOB FUNCTIONS:
1.) Check schedule of coils to be run to insure all coils are in the bay.
2.) Feed coil to shear, cut off leaderstrips, cut scrap to proper gauge, feed head of coil to welder. Enter leaderstrip data for each coil in AS400.
3.) Weld coil to tail of preceding coil.
4.) Communicate to the furnace operator the coil number running and observe for any incoming defects.
5.) Monitor coils in line for steering and defects. Inspect the coils as they are exiting the degrease section for degrease effectiveness and surface defects. Enter all entry inspection notes into AS400 and communicate the entry inspection notes verbally to the shift leader/furnace operator.
6.) Follow all prescribed safety rules. Complete safety training and safety observations monthly.
7.) Housekeeping/maintenance work as assigned.
8.) Any other jobs as assigned.
9.) Fly in empty leaderstrip tables as needed and remove full tables.
SUPPLEMENTAL JOB FUNCTIONS:
1.) Other duties as assigned.
2.) Participation in continuous improvement programs.
MINIMUM EDUCATION, SKILLS AND EXPERIENCE:
Minimum of a High School Degree or Equivalent (GED).
PHYSICAL ABILITIES REQUIRED:
1.) Mobility: Stand (stationary) - 15%, stand/walk - 45%, walking - 15%, sitting - 25%.
2.) Strength and Agility: Lifting - occ. 75#, carrying - occ. 150 Ft., push/pull - occ. 75#, climbing - occ., balancing - occ., bending - occ., stooping - occ., crouching - occ., kneeling - occ., crawling - occ., running - occ., twisting - occ., turning - occ.
3.) Dexterity: Grasping (firm/strong), finger dexterity/handling, reaching.
HEALTH AND SAFETY
1.) Work in compliance with the Occupational Health and Safety Act and regulations.
2.) Follow Company safety rules.
3.) Report the absence of or defect in any protective equipment or clothing to the Supervisor or Manager immediately.
4.) Mobility in plant
5.) Ability to lift at least 50 lbs
6.) Visual ability with or without correction
7.) Communication abilities
8.) Ability to work a rotating shift (rotating from days to night on a weekly or bi-weekly schedule).
9.) Use or wear the equipment, protective devices or clothing that is required to be used or worn:
10.) Report to the Safety Coordinator, Group Lead or Supervisor any contravention of the Occupational Health and Safety Act and Regulations or Company policy.
11.) Must follow all Lock out Tag out (LOTO) guidelines for designated machines.
12.) Maintain a clean and safe work area.
WORK ENVIRONMENT:
