- Determine work assignment based on schedule or direction from supervisor. Review paperwork and drawings to determine work to be accomplished.
- Assist in locating work area using drawings, IP (Installation Plan), OSIP (Out of Sequence Installation Plan), NCO (Non-Conformance Order), or other paperwork that specifies airplane number, section number, and three-point location.
- Obtain and verify pre-picked detail parts (kits), standards, and assemblies were issued correctly by comparing part numbers and quantities to W/O, IP, and/or BOM (Bill of Material) on drawing(s). Ensure that parts issued are effective for the airplane and are free of visible defects.
- Operate mechanical lifts of various types (e.g., tiger and snorkel lifts), as required, to locate parts/assemblies into position or to perform assembly work.
- Use precision measurement tools (e.g., micrometer, calipers) to measure dimensions per drawing, sketches, and engineer requirements.
- Incorporate changes to aircraft to reconfigure to customer requirements. Install or rework interior and/or exterior components to engineering specifications.
- Check own work as well as others as requested after completion of each operation in job and/or completed job to ensure it is complete per drawing, that there are no defects and that area around job is clean, prior to putting up for inspection.
- Submit completed job or in-process checks, as required, to inspector at appropriate steps in sequence. Perform rework as required (e.g., pick-ups, special repairs).
- Consult with management and/or others (e.g., engineering, planning, inspection, or customer) on process/schedules or job-related issues as required.
- Handle and dispose of hazardous materials in approved manner (e.g., lubricants, primer).
- Must be a minimum of at least 18 years of age.
- Must be able to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship.
- Minimum one year of experience as a machinist, mechanic, or other mechanical aptitudes.
- Minimum one year of experience in mechanical troubleshooting, disassembly, and repair.
- Must have the ability to read and interpret system prints and schematics.
-
Modification Mechanic
4 hours ago
Boeing Everett, United States Full timeJob Description · At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We're committed to fostering an environment f ...
-
Modification Mechanic
19 hours ago
Boeing Everett, United StatesJob DescriptionAt Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We're committed to fostering an environment for ...
-
Aircraft Mechanic
2 weeks ago
Benelux Tek Group, Inc Everett, United StatesJob DescriptionBenelux Tek Group Inc. (Aerospace Division) is currently seeking highly skilled Aircraft Mechanic - Flight Control for one of its clients in Everett, Seattle, Washington. Our client 52 years of success is the result of our employees who have dedicated themselves to ...
-
flight controls mechanic
5 days ago
HQ Aero Management Everett, United StatesSummary: · HQ Aero is currently recruiting for experienced FLIGHT CONTROLS MECHANICS in EVERETT, WA · Responsibilities: The Flight Controls Mechanic is responsible for the removal and Installation of flight control surfaces, components, and repair to ensure airworthiness. Util ...
-
Design Engineer
10 hours ago
Actalent Everett, United States ContractJOB DESCRIPTION Looking for a Tool Design Engineer to join a large aviation company · As a Tool Engineer, you will support a variety of tooling that is required to build the fleet. This position involves utilizing engineering expertise to develop and/or modify highly complex mu ...
-
Senior Tool Maker
2 weeks ago
Akkodis Everett, United StatesA Senior Tool Maker position in Everett, WA is available courtesy of Akkodis. · Range: $26 - $46 per hour · Location: Everett, WA · Type: Direct Hire/Full Time/Salaried or Contract-to-Hire · Description: · As a member of the Mechanical development team the ideal candidate will be ...
-
Mechanic I
3 weeks ago
Radius Recycling Everett, United StatesThe Mechanic reports to the Maintenance Supervisor. The Technician is responsible for repairing and maintaining mechanical equipment by conducting quality control analysis to evaluate performance while ensuring that all of his/her efforts are compliant with the company Health, Sa ...
-
Hydraulic Mechanic
2 weeks ago
Aviation Technical Services Everett, United StatesHydraulic Mechanic · 2600 W Casino Rd, Everett, WA 98204, USA · Req #924 · Monday, April 22, 2024 · SUMMARY: · As a Fluid Power Hydraulic Mechanic, your primary responsibility will be to repair, overhaul, and modify hydraulic systems and components for commercial aircraft. T ...
-
6G5EI4-Technical Design 4
1 week ago
Indotronix International Corporation Everett, United StatesIndotronix is seeking a Onsite Job - Technical Design / Mechanical & Structural Design Level 4 for a Job Opportunity in Everett,Washington. · Job Description : · Leads the development and maintenance of mechanical/structural engineering product definition. · Oversees the develop ...
-
Electrical Mechanic 2
2 weeks ago
Safran Group Everett, United StatesNorthwest Aerospace Technologies ("NAT"), a Safran Company, is the only EASA DOA Certified aircraft interior reconfiguration group in the United States. Focusing on commercial and military aircrafts, NAT provides first class services in design, engineering, quality, certification ...
-
Engineering Technician
1 week ago
Helion Energy Everett, United StatesAbout Helion · We are a fusion power company based in Everett, WA, with the mission to build the world's first fusion power plant, enabling a future with unlimited clean electricity. Our vision is a world with clean, reliable, and affordable energy for everyone. · Since Helion' ...
-
Search Pros Inc Everett, United StatesJob Description: 100% onsite · Leads the development and maintenance of mechanical/structural engineering product definition. Oversees the development and design of layouts and the modification of existing designs to satisfy customer and production requirements. Develops product ...
-
Electronics Repair Technician
2 weeks ago
Korry Electronics Co Everett, United StatesThank you for your interest in Korry Electronics · Our company culture is focused around ownership, transparency, process improvement and trust & respect. We are looking for talented people (like you) to lead our business to the next level while giving you the opportunity to deve ...
-
Senior Tool Maker
4 weeks ago
Akkodis Everett, United StatesA Senior Tool Maker position in Everett, WA is available courtesy of Akkodis. · Range: $26 - $46 per hour · Location: Everett, WA · Type: Direct Hire/Full Time/Salaried or Contract-to-Hire · Description: · As a member of the Mechanical development team the ideal candidate wi ...
-
6H6PI3 - Individual Contributor - 3
1 week ago
Experis Everett, United States ContractTitle: Individual Contributor - 3 · Location: Everett WA 98204 · Starts with 12 months contract · Responsibilities: · Primary responsibilities: · This is an equipment and tooling development, implementation, and improvement role. Your duties will include (but are not limited to): ...
-
Electrical Mechanic 2
3 weeks ago
Safran Everett, United StatesJob Description · Northwest Aerospace Technologies ("NAT"), a Safran Company, is the only EASA DOA Certified aircraft interior reconfiguration group in the United States. Focusing on commercial and military aircrafts, NAT provides first class services in design, engineering, qual ...
-
Tooling Engineer
7 hours ago
Actalent Everett, United States: Develops program and project requirements develops highly complex equipment and tooling concepts and designs solutions including alternatives for the Production System. Validates analysis of technical data influences product engineering design and makes robotics automation or t ...
-
Tooling Engineer
3 weeks ago
The Judge Group Everett, United StatesEquipment & Tooling Engineer · Job Description: · Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. · Validates analysis of technical data, influences produc ...
-
Mechanical / Mechanical Design 5_Non-Cleared
12 hours ago
Actalent Everett, United States: · Seeking a Lead Mechanical Engineer to oversee the execution and delivery of the engineering team's work products and serve as the primary engineering contact for the design team. You will communicate with the Integrated Product Team IPT on your assigned project clearly defini ...
-
Indotronix International Corporation Everett, United StatesIndotronix is seeking a · Onsite Job - Equipment & Tool Engineer / Production Asset Engineer Level 4 · for a Job Opportunity in Everett,Washington · Job Description : · Seeking a Production Asset Engineer to support the Electrical Systems Responsibility Center (ESRC) in Evere ...
Modification Mechanic - Everett, United States - Boeing
Description
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense, Space & Security (BDS) has an exciting opportunity for a Modification Mechanic to join our team in Everett, WA.
Position Responsibilities:
Security Clearance & Export Control Requirements:
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. (An Interim and/or final U.S. Secret Clearance Post Start is required.)
Basic Qualifications (Required Skills/Experience):
This position offers relocation based on candidate eligibility.
Shift:
This position is for 2nd shift.
Additional Information:
This is an hourly position governed by the International Association of Machinist (IAM-751) Collective Bargaining agreement.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Total Rewards Statement:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range: $26.50/hr. - $46.27/hr.
Applications for this position will be accepted through May 5, 2024.
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.