- Use manual and computerized diagnostic methods to identify potential problems in a vehicle
- Explain mechanical problems and possible solutions to clients
- Plan work and testing procedures using charts, experience and other organizational methods
- Test parts and systems to ensure they work correctly
- Ensure all critical parts are checked and tested
- Perform basic automotive care, including changing oil and rotating tires
- Repair or replace worn, old or defective parts of a vehicle
- Repair or modify a vehicle to a client's specifications, if possible
- Assess vehicles and/or machinery to accurately diagnose and repair issues
- Liaise with clients to determine their automotive requirements and communicate vehicular defects or problems
- Provide routine inspections of vehicles and inform clients of any issues
- Prepare quotes and work estimates as requested
- Keep an accurate log of all work performed
- Maintain and clean garage equipment and tools to ensure they are kept in a safe and usable condition at all times
- Adhere to company work safety policies
- Consult the customer and reading work orders to evaluate the tasks required
- Prepare work plans after fully scoping out the issues
- Run diagnostic tests on diesel engines and interpreting the results to offer suitable solutions
- Inspect vehicle systems, including suspensions, steering and exhausts
- Repair or replace vehicle transmissions, brakes, engines and other associated parts
- Conduct field visits in the case of an emergency or sudden breakdown
- Test drive repaired vehicles to gauge their performance
- Complete oil changes, wheel balancing, alignment, and brake checks
- Maintain records of parts inventory and serviced vehicles
- Valid Driver's License (required)
- At least 18 years old (required)
- Pass physical and drug test (required)
- 1 year of experience (preferred)
- Competitive Salary
- Medical and Dental Insurance
- Paid Vacation and Time Off
- 401k with company matching
- Training
-
Mechanical Engineer
1 week ago
Selectek Alpharetta, United StatesOur client in Alpharetta, GA seeking a candidate experienced mechanical design engineer to help with the design of DoD C4ISR products. These designs are typically for display monitors and computers for DoD applications, and for cabin management and inflight entertainment systems ...
-
Mechanical Engineer
3 weeks ago
Engineered Parts Sourcing Alpharetta, United States**RELOCATION ASSITANCE PROVIDED** · **MUST HAVE COLD FORMING EXPERIENCE** · Company Overview: · Engineered Parts Sourcing (EPS) is a leading single-source supplier of specialty fasteners and cold headed parts to national and international OEMs. With nearly 40 years of experie ...
-
Mechanical Engineer
1 week ago
Selectek Alpharetta, United StatesWe are looking for a Mechanical Engineer to start working with a client of ours in Alpharetta, GA as soon as possible. This candidate will be responsible for helping with the design of DoD C4ISR products. These designs are typically for display monitors and computers for DoD appl ...
-
Mechanic 1
1 week ago
GeorgiaGov Georgia, United StatesJOB SUMMARY: · Under direct supervision, learns to maintain, diagnose, inspect and/or repair engines, vehicles and other motorized equipment. JOB SPECIFIC DUTIES: Under close supervision, maintains, diagnoses, and performs repairs of moderate difficulty on gasoline and diesel- ...
-
Process Mechanic
5 days ago
Perrigo Georgia, United StatesPerrigo Company is dedicated to making lives better by bringing Quality, Affordable Self-care products that consumers trust everywhere they are sold. Help us do it. · External applicants please note: To apply to this position please click the APPLY button at the bottom of the app ...
-
Mechanical Engineer
1 day ago
Selectek Alpharetta, United States· Our client is currently seeking a Mechanical Engineer. · Duties/Responsibilities: · Design mechanical parts using machined aluminum and bent metal that meet or exceeds requirements. · Creates mechanical layouts and design concepts for new products using SOLIDWORKS. · Works ...
-
Mechanical Engineer
3 weeks ago
Selectek Alpharetta, United StatesOur client is a leader in the oil and gas industry, and they have an exciting opportunity for a new Mechanical Engineer to join their team. This position supports mechanical design and engineering work under the direction of lead engineers. The ideal candidate will perform engine ...
-
Field Mechanic
1 week ago
Martin Marietta Alpharetta, United StatesDescription · A member of the S&P 500 Index, Martin Marietta is an American-based company and a leading supplier of heavy building materials – including aggregates, cement, ready-mixed concrete and asphalt. Through a network of operations spanning 28 states, Canada and the Baham ...
-
Senior Mechanical Engineer
3 days ago
ArgonFDS Alpharetta, United StatesSenior Mechanical Engineer · ArgonFDS designs and produces rugged display monitors and computers for DoD applications, and for cabin management and inflight entertainment systems used on private, commercial and government executive jets. · We are seeking a candidate experienced i ...
-
Mechanical Project Engineer
1 week ago
certainteed Georgia, United States Permanent / RegularContamos com você para · What's the job? · This position is designed to accomplish the goals of the organization by the judicious application of knowledge and experience in project planning, selection, purchase, installation, operation & maintenance, modifications & modernizati ...
-
Mechanical Inspector
3 weeks ago
Axiom Staffing Group ALPHARETTA, United StatesA large manufacture in Roswell is in search for a Mechanical Inspector, if you qualify for the job, apply now or come by and see us. Location: Roswell, Ga Shift: 1st Shift Monday - Friday 7:30 A-4 PM - Duties: This person will be inspecting incoming Mechanical, Inspector, Mechani ...
-
Mechanical Engineer
1 week ago
Selectek Staffing Solutions Alpharetta, United StatesOur client is seeking a candidate experienced mechanical design engineer to help with the design of DoD C 4 ISR products. These designs are typically for display monitors and computers for DoD applications, and for cabin management and inflight enter Mechanical Engineer, Mechanic ...
-
Mechanical Engineer
3 days ago
Selectek Alpharetta, United StatesOur client in Alpharetta, GA seeking a candidate experienced mechanical design engineer to help with the design of DoD C4ISR products. These designs are typically for display monitors and computers for DoD applications, and for cabin management and inflight entertainment systems ...
-
Mechanical Engineer
1 week ago
Selectek Alpharetta, United States· Job Description: · Our client is seeking a candidate experienced in mechanical design engineering to help with the design of DoD C4ISR products. These designs typically involve display monitors and computers for DoD applications, as well as cabin management and inflight entert ...
-
Mechanical Engineer
6 days ago
Selectek Staffing Solutions Alpharetta, United StatesOur client is seeking a candidate experienced in mechanical design engineering to help with the design of DoD C 4 ISR products. These designs typically involve display monitors and computers for DoD applications, as well as cabin management and infli Mechanical Engineer, Mechanic ...
-
Mechanical Engineer
3 days ago
Engineered Parts Sourcing Alpharetta, United States**RELOCATION ASSITANCE PROVIDED** · **MUST HAVE COLD FORMING EXPERIENCE** · Company Overview: · Engineered Parts Sourcing (EPS) is a leading single-source supplier of specialty fasteners and cold headed parts to national and international OEMs. With nearly 40 years of experience ...
-
Mechanical Engineer
4 hours ago
Andritz Group Alpharetta, United StatesEvery day, ANDRITZ continues to deliver successful innovative solutions to our customers globally. Why are we so successful? Because we are passionate and love what we do We are at the forefront of future engineering technologies, with solutions tha Mechanical Engineer, Mechanica ...
-
Mechanical Engineer
1 week ago
Selectek Sandy Springs, United StatesNeeded Immediately: Mechanical Engineer in the Sandy Springs, GA area. · Required: · 2+ years of experience OR up to PE level experience · Mechanical Engineering Degree · Must know ACAD and/or Revit · Must have experience in commercial and multi-family projects · HVAC/Plumbing/Fi ...
-
Diesel Mechanic
2 weeks ago
WM Alpharetta, GA, United States Full time*Pay Rate: *$ $32.02, based on experience (with opportunity for additional incentives up to SIX Dollars additional PER HOUR)*SCHEDULE: *Monday to Friday 10am-7pm _*Quarterly *__Tool Allowance __Work Boot Allowance _*Relocation* assistance available*What is the value of a WM job? ...
-
Mechanical Estimator
1 week ago
Evans General Contractors Alpharetta, United StatesEvans General Contractors, LLC is a national/international design-build general contracting and construction management firm. Evans seeks to hire an experienced professional to join its management team as an experienced Estimator. For additional information about Evans you can vi ...
Mechanic - Alpharetta, United States - Precision Concrete Construction
1 month ago
![Default job background](https://contents.bebee.com/public/img/bg-user-ex-1.jpg)
Description
Contractor Sales International has been serving concrete contractors the Atlanta metropolitan area since 2000. We provide quality tools, equipment, supplies & products to form, place, & finish any concrete pour. CSI also offers mechanical repair and service for your equipment. We work trowel machines, generators, vibrators, power screeds, cut off saws and much more
Position Summary
Pay Range: $25- 31/hour based on experience.
A Mechanic, or Licensed Mechanic, is responsible for investigating problems with different types of motor vehicles and making repairs accordingly. Their duties include communicating with vehicle owners to discuss their concerns, carrying out routine maintenance procedures on motor vehicles and replacing parts on motor vehicles to promote their functionality.
Essential Duties and Responsibilities Duties include the following: Other duties may be assigned.
Job Requirements
TYPICAL PHYSICAL DEMANDS: Requires sitting, standing, walking, bending and a normal range of hearing and vision. May require lifting up to 50 pounds. Requires working outdoors with light to moderate physical exertion.
TYPICAL MENTAL DEMANDS: Must be able to communicate, orally and written, in a professional manner. Requires public contact and excellent interpersonal skills. Emotional stability and personal maturity are important attributes in this position.
Acknowledgements
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits
Contractor Sales International is an Equal Opportunity Employer.
THIS JOB DESCRIPTION DOES NOT CONSTITUTE A CONTRACT FOR EMPLOYMENT