- Facilitates set up activities as requested by operator.
- Assist Operators pulling heaters after stoppages.
- Put pieces back on the line at line loaders.
- Empty trash containers in Forge and Steel Buildings.
- Assist crane operators hooking up and clearing pit jams.
- Guides the completed 1st end from take-away conveyor to the rack.
- Switches exit ends on the conveyor when racks are full.
- Verifies all bundles have tags with part and heat codes.
- Maintains all wood in the steel buildings. Ensures that it is organized and stacked safely.
- Maintains all bins and floor free of loose wood and debris.
- Loads the coater and the press rack.
- Operates the pallet conveyor to bring a full skid into position when one has been emptied without stopping the press or letting it run with empty passes.
- Loads cycle push buttons.
- Watches for heat changes and ensures that heats are not mixed. Inform the Operator or Foreman when one is about to occur.
- Verifies that the pallet of material has a Green accept tag before loading into the coater. Notifies the Operator or Foreman if no Green accept tag is found.
- Watches for material conditions that are not suited to run through the coater and informs the Operator, i.e. rust, oil or any other contamination that may occur..
- Runs sonic reject pieces during periods of downtime and at the end of the job.
- Other Duties as Assigned
- High school diploma or general education degree (GED) preferred.
- One to three months related experience and/or training preferred.
- Ability to read and write simple instructions, short correspondence, and memos.
- Ability to effectively report data and job specific information as needed.
- Ability to understand and perform intermediate mathematics including but not limited to proportions, physics, algebra and geometry.
- Ability to read a tape measure and other length gauges
- Comfortability with digital tools, scales and calibration systems
- Confidence with digital self-service platforms, emails, and time clocks
- Experience with Plex is ideal but not required
- Solid mechanical aptitude.
- Ability to train on and/ or operate a crane.
- Frequent use hands or fingers to handle, inspect, clean and audit equipment.
- Stand, walk, push, pull, squat, bend, and reach during shifts
- Use carts, dollies, cranes and jacks to transport material if needed
- Climbing ladders and stairs to reach work at potential heights of 30ft or more
- Navigate narrow walkways, confined spaces and overhead mezzanines
- Tolerate potentially extreme temperature fluctuations impacted by weather and machinery
- Acclimate to high noise and vibration levels in work spaces
- Wear and adhere to all PPE guidelines including hard hats, protective eye wear, ear plugs, and approved footwear with metatarsal and steel toe safeguards.
- Lift and /or move up to 50 pounds
-
CNC Machinist
2 weeks ago
Fives Cleveland, United States Permanent positionTake part in the Sustainability Industry · Every day in 25 countries, we (9,000 people) create the sustainable solutions the world needs by inventing the technologies of tomorrow across the entire spectrum of industry: from metallurgy to advanced logistics, from cement plants t ...
-
Machine Operator
2 weeks ago
Minute Men Staffing Cleveland, OH, United StatesNow Hiring for Forge and Machine Operators for a Great Company in Cleveland, OH · About the Company: · Custom manufacturer of forged, machined, and fully assembled products. We successfully handle complex projects from conception through manufacture. The collaboration of our engi ...
-
Manufacturing Engineering Manager
3 weeks ago
Howmet Aerospace Cleveland, United StatesResponsibilities · Job Dimensions: · This position is responsible for: Leading the HWS Cleveland Forge engineering team, including mechanical, electrical, and project engineering. · Ownership of the HWS Cleveland Forge Capital Expenditure program · Leading the management and exe ...
-
Manufacturing Engineering Manager
3 days ago
Howmet Aerospace Cleveland, United StatesResponsibilities · Job Dimensions: · This position is responsible for: Leading the HWS Cleveland Forge engineering team, including mechanical, electrical, and project engineering. · Ownership of the HWS Cleveland Forge Capital Expenditure program · Leading the management and exe ...
-
Manufacturing Engineering Manager
2 weeks ago
Howmet Corporation Cleveland, United StatesResponsibilities · Job Dimensions : · This position is responsible for: · Leading the HWS Cleveland Forge engineering team, including mechanical, electrical, and project engineering. · Ownership of the HWS Cleveland Forge Capital Expenditure program · Leading the management a ...
-
Manufacturing Quality Manager
4 days ago
Howmet Aerospace Cleveland, United StatesResponsibilitiesJob Dimensions: Develops and maintains the quality strategy and vision for the organization. Develops, implements, and improves the Quality System such as ISO9001 and IATF16949 and all its functions throughout the organization. Manage and direct all plant quality ...
-
Manufacturing Quality Manager
3 days ago
Howmet Aerospace Cleveland, United StatesResponsibilitiesJob Dimensions: Develops and maintains the quality strategy and vision for the organization. Develops, implements, and improves the Quality System such as ISO9001 and IATF16949 and all its functions throughout the organization. Manage and direct all plant quality ...
-
Manufacturing Quality Manager
2 days ago
Howmet Aerospace Cleveland, United StatesResponsibilitiesJob Dimensions: Develops and maintains the quality strategy and vision for the organization. Develops, implements, and improves the Quality System such as ISO9001 and IATF16949 and all its functions throughout the organization. Manage and direct all plant quality ...
-
Manufacturing Quality Manager
3 days ago
Howmet Aerospace Cleveland, United StatesResponsibilitiesJob Dimensions: Develops and maintains the quality strategy and vision for the organization. Develops, implements, and improves the Quality System such as ISO9001 and IATF16949 and all its functions throughout the organization. Manage and direct all plant quality ...
-
Manufacturing Quality Manager
5 days ago
Howmet Aerospace Newburgh Heights, United States Full timeResponsibilities · Job Dimensions: Develops and maintains the quality strategy and vision for the organization. Develops, implements, and improves the Quality System such as ISO9001 and IATF16949 and all its functions throughout the organization. Manage and direct all plant quali ...
-
Manufacturing Quality Manager
1 week ago
Howmet Corporation Cleveland, United StatesResponsibilities · Job Dimensions: Develops and maintains the quality strategy and vision for the organization. Develops, implements, and improves the Quality System such as ISO9001 and IATF16949 and all its functions throughout the organization. Manage and direct all plant quali ...
-
Manufacturing Quality Manager
2 weeks ago
Howmet Corporation Cleveland, United StatesResponsibilities · Job Dimensions: · Develops and maintains the quality strategy and vision for the organization. · Develops, implements, and improves the Quality System such as ISO9001 and IATF16949 and all its functions throughout the organization. · Manage and direct all pl ...
-
Senior Brand/Marketing Manager #1775
1 day ago
Pivotal Talent Search Cleveland, United StatesJob Description · Job DescriptionWe are a vibrant B2C company dedicated to connecting fans with the exciting and imaginative world of their favorite social media influencers, video games, and entertainment icons through a diverse range of merchandise. We're on a quest to not just ...
-
Senior Brand/Marketing Manager
3 days ago
Pivotal Talent Search Cleveland, United StatesJob Description · Job Description · We are a vibrant B2C company dedicated to connecting fans with the exciting and imaginative world of their favorite social media influencers, video games, and entertainment icons through a diverse range of merchandise. We're on a quest to not ...
-
Manufacturing Quality Manager
3 days ago
Howmet Aerospace Cleveland, United StatesResponsibilities · Job Dimensions: · Develops and maintains the quality strategy and vision for the organization. Develops, implements, and improves the Quality System such as ISO9001 and IATF16949 and all its functions throughout the organization. Manage and direct all plant qua ...
-
Maintenance Reliability Manager
2 weeks ago
Howmet Corporation Cleveland, United StatesResponsibilities · Primary Purpose of Job · Under the direction of the Plant Manager, this position is responsible for leading and directing maintenance resources to the fulfillment of Howmet Wheels Cleveland business objectives. This position leads and is directly accountable f ...
-
Insurance Sales Agent
2 weeks ago
Barnes Agency Cleveland, United StatesJob Description · Job Description Join Our Team: Insurance Sales Agent · Are you a passionate go-getter with a knack for building relationships and driving results? Do you thrive in a dynamic environment where your efforts are rewarded? We're seeking a motivated Insurance Sales A ...
-
CNC Machinist 2nd Shift
3 days ago
Fives North American Combustion, Inc. Cleveland, United StatesFives North American Combustion, Inc. is hiring a permanent, full-time CNC Machinist (2nd Shift) to join our team in Cleveland, OH. · Fives North American Combustion (HQ: Cleveland) is a dynamic subsidiary of the renowned Fives Group (HQ: Paris). Boasting over 100 years of groun ...
-
Financial and M&A Analyst
4 weeks ago
TransTech Energy Cleveland, United StatesJob Description · Job DescriptionJob Title: Financial and M&A Analyst · Location: Cleveland, OH; Hybrid · Company Overview: · TransTech Energy is a leading provider of engineered equipment solutions for processing, storing, distributing, and utilizing a wide variety of liquids ...
-
Tool and Die Maker, 2nd Shift
3 days ago
Howmet Aerospace Cleveland, United StatesResponsibilities · Job Description: · This position is responsible for the mechanical construction of our molds and dies. This work requires the application of standard mold making techniques, procedures, and criteria. Responsible for leading the construction of several products ...
Forge Utility - Cleveland, United States - Mid-West Forge Corporation
Description
Job Description
Job DescriptionPosition Summary: Utility is the entry level position in the Forge. Assists workers by performing general labor operations in the positions of Helper, Rack Person, Hook-Up, and Loader and supports operators as needed.
Essential Duties and Responsibilities: include the following. Other duties may be assigned.
Supervisory Responsibilities:
This job has no supervisory responsibilities.
Education and/or Experience:
Key Competencies
Communication Skills:
Mathematical Skills:
Computer Skills:
Additional Preferred Skills and Qualifications:
Physical Demands:
Work Environment:
The Utility person will work throughout all departments in our facility and will frequently interact with historic machinery which often involves close proximity to heat, noise, debris, conveyance systems and other potentially dangerous equipment. This role will be exposed to confined spaces, moving mechanical parts, risk of shock, and exposure to chemicals. The Utility person will encounter high levels of floor and overhead traffic due to material transportation throughout the facility which can cause high levels of vibration and airborne disturbances. There are areas of paved and unpaved walkway, rail cart systems, open flames, active shipping lanes and occasionally standing water to be cautious of.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.
