-
Equipment Engineer
4 weeks ago
Axelon Trenton, United StatesJob Description: 100% onsite · PURPOSE AND SCOPE OF POSITION: · The LSM Equipment Engineer supports the successful operation of laboratory and clinical manufacturing operations at their home sites through interaction with internal team members and internal customers, and externa ...
-
Engineer for Technical Building Equipment HVACR
3 weeks ago
Eclipse Innovations Bradley Gardens, United StatesYour tasks: · As a TGA engineer for the areas of heating / air conditioning / ventilation / plumbing within the Architecture & Construction department at ECE, you are part of the team responsible for planning the technical building equipment with a focus on our shopping centers. ...
-
Safety and Equipment Engineer
3 weeks ago
University of Pennsylvania Philadelphia, United StatesPenn Engineerings world-acclaimed faculty, state-of-the-art research laboratories and highly interdisciplinary curricula offer an experience that is unparalleled. Innovation and technology drive every program and transform the fundamentals of what f Equipment Engineer, Engineer, ...
-
Fired Equipment Engineer
3 weeks ago
Haavia, Inc. Jamesburg, United StatesTitle: Fired Equipment Engineer · Location: Baytown, TX (On-Site) · Client: Quest Global/ExxonMobil · Rate:$40-43/hour on W2 · Domain: Required Oil and Gas domain candidates with years of experience · Roles & Responsibilities:The Fired Equipment engineer is responsible for provi ...
-
Equipment/Test Engineer
1 day ago
Noblis Philadelphia, United StatesResponsibilities: · Noblis MSDs mission is to support the Naval Sea Systems Command (NAVSEA) and, Naval Surface Warfare Center (NSWCPD) and their missions to enable research, development, test and evaluation, acquisition, engineering, systems integration, in-service and fleet en ...
-
Sr. Validation Engineer, Equipment
1 week ago
Renaissance LLC Lakewood Township, United StatesRenaissance LLC · All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legal ...
-
GQR Lakewood, United StatesTitle: Sr. Validation Engineer Equipment and Sterilization · Location: Lakewood, NJ · Status: Full-time direct hire, onsite · Experience: Minimum of 5 years experience with validation · Compensation: $115,000 · This role is not set up for C2C and cannot offer any Visa sponsorship ...
-
Sales Engineer: Equipment Sales
1 week ago
BEUMER Group Somerset, United StatesJob Description · Job DescriptionCompany Description · BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletizing, packaging, sortation, and distribution technology. BEUMER Group offers the right solution for almost ev ...
-
Sr. Validation Engineer, Equipment
1 week ago
Renaissance Lakewood, LLC Lakewood, United StatesOverview: · This position is responsible for Equipment and Sterilization Validation processes (i.e. included but not limited to Autoclave, SIP, tunnel, dry heat, and VHP studies), that supports commercial and new R&D drug development activities in support of the client projects ...
-
Sr. Validation Engineer, Equipment
5 days ago
Renaissance Lakewood, LLC Lakewood, United StatesOverview · This position is responsible for Equipment and Sterilization Validation processes (i.e. included but not limited to Autoclave, SIP, tunnel, dry heat, and VHP studies), that supports commercial and new R&D drug development activities in support of the client projects i ...
-
Sales Engineer: Equipment Sales
2 weeks ago
BEUMER Group Somerset, United StatesCompany Description · BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletizing, packaging, sortation, and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a ...
-
Sr. Validation Engineer, Equipment
2 weeks ago
Renaissance LLC San Francisco, United States PermanentRenaissance LLC · All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legal ...
-
Stellar Enterprises Hill City, United StatesAs a global leader in the industry, HYDRO has been realizing products and projects for the production and maintenance of aircraft and engines for over 50 years. Our clients include all major international aircraft and engine manufacturers, airlines, airports, and aircraft mainten ...
-
Nebula Technologies Trenton, United StatesABLS2301 - Graduate Engineer (m/f/d) in Project Management for Facilities/Energy in Essen and Dortmund, Part-time/Full-time · Your Responsibilities: · - Assisting in coordinating and managing our facilities and energy projects · - Taking on partial tasks in project processing · - ...
-
Mechanical Design/Equipment Design Engineer
2 weeks ago
Synerfac Piscataway, United StatesOur client is a small high-tech company specializing in custom chemical vapor deposition equipment and services. They are looking for a Mechanical Design/Equipment Design Engineer - To join a team of engineers that design complete thin film chemical vapor deposition and related s ...
-
Mechanical Design/Equipment Design Engineer
2 weeks ago
Synerfac Piscataway, United StatesOur client is a small high-tech company specializing in custom chemical vapor deposition equipment and services. They are looking for a Mechanical Design/Equipment Design Engineer - To join a team of engineers that design complete thin film chemical vapor deposition and related s ...
-
Roche Branchburg, United States Full timeThe Position · At Roche, 94,000 people across 100 countries are pushing back the frontiers of healthcare. Working together, we've become one of the world's leading research-focused healthcare groups. Our success is built on innovation, curiosity, and diversity. We believe every ...
-
FusionTech Groveville, United StatesWho wants to actively participate in environmental protection? Who is interested in biology, chemistry, and manual work? As an environmental technologist for wastewater management, you will monitor wastewater treatment plants, conduct analytical measurements, and maintain various ...
-
Project Engineer
3 weeks ago
Petroplan Trenton, United StatesThe Project Engineer - Mechanical shall be responsible for the direct oversight of the execution of process engineering and design by the Client's engineering subcontractor. The Project Engineer - Mechanical primarily applies principles, knowledge, and practices of process engine ...
-
Project Engineer
3 weeks ago
Petroplan Trenton, United StatesPOSITION SUMMARY: · Project Engineer - Electrical shall be responsible for the direct oversight of the execution of the electrical engineering and design by The Client's engineering subcontractor. · The Project Engineer - Electrical primarily applies principles, knowledge, and ...
Lab Systems Management Equipment Engineer - Trenton, United States - On-Board Companies
Description
On-Board Companies is hiring a Lab System Management Equipment Engineer in Warren, NJPosition Details:
Position Type: 12-Month Contract with additional opportunity contingent upon performance
Job Location:
Warren, NJ (100% on-site)
Compensation:
$60 - $64.50/hr
Drug and background screenings required
No C2C or Visa Sponsorship Available
PURPOSE AND SCOPE OF POSITION:
The LSM Equipment Engineer supports the successful operation of laboratory and clinical manufacturing operations at their home sites through interaction with internal team members and internal customers, and external service providers
The incumbent conducts tasks assigned by the management independently or with minimum supervision
The LSM Equipment Engineer is responsible for initiating and owning deviations, CAPAs, and change controls, and authoring calibration and maintenance SOPs as well as performing calibrations, maintenance, and qualifications/validations.
REQUIRED COMPETENCIES:
Knowledge of cGMP, GXP, GAMP, SDLC regulations, including 21CFR part 11, computer systems validation requirements and good documentation practices.
Knowledge of pharmaceutical, manufacturing and laboratory systems and equipment.
Knowledge of calibration management and environmental monitoring systems.
Strong critical thinking skills and the ability to work independently.
Excellent interpersonal and communication skills with experience dealing with a diverse workforce where individual initiative, accountability to the team, and professional maturity are required.
Strong multi tasking and organizational abilityAbility to effectively manage multiple tasks and activities simultaneously.
Proficiency in Microsoft Office Suite
Word, Excel, PowerPoint, and Outlook; innate ability to learn new software, such as corporate intranet and enterprise applications.
Working knowledge of scheduling software and systems, and inventory management systems, Blue Mountain RAM and Maximo preferred.
Ability to interact effectively with QC, Manufacturing, QA, and Facilities groups.
DUTIES AND RESPONSIBILITIES
Operational Activities
Executes equipment calibration, preventative maintenance, performance verification and repair activities in laboratory and manufacturing areas.
Supervises vendors for calibration, preventative maintenance, performance verification and repair functions.
Reviews and approves vendor executed calibration, maintenance, repair, and performance verification records for accuracy, and completeness.
Ensures all calibration, PM, and performance verification records are filed appropriately after approval.
Executes requalification on Controlled Temperature Units (ex
Refrigerators, Freezers (which includes -20C / -80C Freezers), Incubators, Cryotanks, and Cryopods).
Supports multiple sites within Warren and Summit.
Owns and supports deviations and investigations that result from calibration or performance verification activities, along with developing and supporting the implementation of corrective and preventive actions.
Authors and supports the development, revision, and review of written procedures for calibration, preventive maintenance, and performance verification of equipment.
Support the development, review and approval of calibration and maintenance plans in site CMMS system.Supports the execution of process improvement studies, as required.
Adheres to written policies and procedures governing the LSM department activities and the equipment they manage to ensure compliance with approved standards.
Maintains a positive relationship with the site customers and outside vendors while promoting a positive team environment.Follows cGMP (current Good Manufacturing Practices) and ALCOA principles ('ALCOA' defines that data should be Attributable, Legible, Contemporaneous, Original, and Accurate) In addition, 'ALCOA+' guidance recommends that data is also Complete, Consistent, Enduring, and Available.
Inventory ManagementWork with Planning group to ensure system is updated as calibration, maintenance and performance verification activities are performed.
Approves Change Request, Asset Inductions, and Work Request.
Approving Calibration and Maintenance forms.
Perform NCRs investigations.
Review and approve calibration and maintenance work.
Regulatory Responsibilities
Maintains all required Corporate, Facilities and EHS training as required.
Adheres to all safety procedures and hazard communication.
May be called upon to act as SME in both internal and regulatory audits.
EDUCATION AND EXPERIENCE
BS in Engineering or Science related discipline required
Minimum 3 years of experience in FDA-regulated industry.
Minimum 3 years of experience working directly with laboratory equipment (ex
centrifuges, temperature/humidity meters, balances, freezers, refrigerators etc.)
Maintenance coordination / planning experience preferred.
Experience working in a clinical environment preferred.
Physical / Mental Demands:
Occasional stooping, bending, stretching, pushing, pulling, reaching, and/or lifting up to 25 lbs.
Ability to sit, stand, walk, and move within workspace for extended periods.
Ability to perform repetitive tasks, including hand to finger manipulations, grasping, pushing, and pulling.
Environmental Conditions:
Environment may include working in office, laboratory, or manufacturing area.
Donning proper gowning and/or PPE such as safety glasses and shoes in an environment with hazardous materials and waste will be required.
Working safely and effectively when working alone or working with others will be required.On-Board was founded in 1976 by Robert L
Wilson to provide Engineering and Design services to the chemical manufacturing industry
Today, On-Board is a thriving privately held family of companies with services including: Consulting, Professional Engineering, Industrial Maintenance and Facility Management, Contracted Manufacturing and Production Services, as well as Temporary Staffing and Recruiting throughout North America.
The On-Board Family of Companies conducts operations through its Corporate Headquarters located in East Windsor, NJ along with Regional Offices in New Castle, DE and Wake Forest, NCOn-Boards Mission is to provide Flexible Service by applying the talents of our people, work processes and technology to meet our clients expectations in a Safe, Responsible and Dependable manner.
On-Board Companies provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, sex, national origin, age, disability or genetics.
INDE
#J-18808-Ljbffr