- Expert in development of precautionary, balanced solutions, update of the repositories and carry over policy. Specification and coding of solutions for automatic processing of validation tests or from the data lake.
- Idle speed calibration (rpm, regulation)
- Calibration of component protection strategies and functions.
- BVM/BVMP/BVA take-off and brio (smoke mapping, anti-droop, idle adaptability)
- Proficient in System Validation, Engine side anti-stall pre-calibration, Calibration of the close control and Basic PWT adaptation and System calibration and PWT functional integration
- Follow-up of functional and inter-system validation tests and follow-up of supplier development activities
- Proficiency in Calibration of BVA gear changes: stable foot, throttle release, pedal depression with different *Lock-up states in Drive and CMI, Calibration of commitments under all vehicle operating conditions, Calibration of gearbox self-adaptive devices, Torque bypass calibration. Anti-overspeed calibration and Calibration of temperature patches, drag reduction, turbine torque recovery function, calibration safety.
- Validation of engine and PWT behaviour (quality of torque exchange, compliance with gearbox requirements, compliance with rpm instructions, etc.) during gear shifts
- Validation of intra-PWT and PWT-vehicle exchanges (flow, quality) and Engine software validation at each project phase
- System calibration (converter status, ratio, gearbox learning, etc.), Calibration and validation of PWT degraded modes and behaviour in Lock-up management phases and become proficient in the calibration of learning (transmissibility, kiss point, grid, synchro point, clutch actuator) and the thermal models (clutch, hydraulics)
- Proficient in Thermal models' calibrations (clutch, hydraulic oil) and Take-off Calibration, Clutch opening/closing calibration without and with gearshift and of torque blending functions, Calibration of hyper shift mode gear shifts and of automatic switch thresholds, Warm up calibrations and verifications, Inter-system optimization, Engine Torque accuracy verification and Fine-tune calibration and anti-lock validation, Drivability objective evaluation, ADAS interactions.
- Bachelor's degree in mechanical or electrical engineering and IC in electrical engineering
- Proficient skills in Inca, MDA, Creta, Concerto, Optisim work environments
- Permits necessary for carrying out tests (driving, electrical, etc.) if necessary.
- Good knowledge of office tools (MS office pack) along with knowledge of electrical concepts and multiplexing system and PID Control Systems
- Valid Driver's License and engine inter-system
-
Development Engineer
3 weeks ago
Velocity Enterprises Warren, United StatesTasks · Building and detailing model-based calculation models for material handling vehicles using MATLAB/Simulink and Simscape · System and behavior analysis of calculation models · Construction of track models based on measurement data · Building model libraries · Conducting ve ...
-
Product Development Engineer
4 days ago
Zobility Auburn Hills, United StatesJob Description: · The Prototype Engineer will be responsible for the engineering, development, and timing of a system and/or components for Prototype builds. · Responsibilities: · Other responsibilities will include driving design completion, bill of material development, part o ...
-
Development Engineer
3 weeks ago
Horizon Ventures Bloomfield Hills, United StatesYour Responsibilities · Independent conception of power semiconductor test systems in a rapidly growing market segment · Continuous development and design of platforms, architectures, and subsystems · Building prototypes for evaluation purposes of future power semiconductor techn ...
-
FEV Auburn Hills, United StatesFEV North America Inc. is adding to their business development team We would like to strengthen our team by hiring a Business Development professional. FEV North America, Inc is part of the FEV Group, an internationally recognized propulsion and vehicle engineering company that s ...
-
Development Engineer
3 weeks ago
Titan Industries Detroit, United StatesCreating the future together: This is the guiding principle of the pro-beam Group. We are one of the world's leading companies in the field of electron beam technology and operate in a complex technological environment - from welding to additive manufacturing. With our products a ...
-
FEV North America, Inc. Auburn Hills, United StatesFEV is a global engineering consultancy providing services within the complete mobility space, including the passenger car and heavy-duty commercial industry. If you are interested in joining a team of experienced engineers developing advanced powertrain systems, that leverage bo ...
-
Technical Professionals Group Auburn Hills, United StatesTechnical Professionals Group (TPG) is searching for a Sr. Project Engineer with specialization in engine and hybrid powertrain development. As a Sr. Project Engineer specializing in the development of both conventional and hybrid powertrains, you will be responsible for leading ...
-
Product Development Engineering
3 weeks ago
Tata Technologies Auburn Hills, United StatesBasic Qualifications: · Bachelor of Science degree in Mechanical or Electrical Engineering or equivalent from an ABET accredited or equivalent program · Five + years of vehicle engineering experience in one or more of the following areas: Body-in-White, Electrical, Interior Sys ...
-
Application Development Engineer
3 weeks ago
Celanese International Corporation Auburn Hills, United StatesOverview: · The Application Development Engineer role for Automotive is a multi-faceted customer / market facing position responsible for driving new business growth through an entrepreneurial mindset and rigorous SFDC Opportunity Build & Development process. · Responsibilities ...
-
Drivability Development Engineer
1 week ago
Capgemini Auburn Hills, United StatesJob Title: Drivability Development Engineer · Job Location: Chelsea, MI · Job Description: · We are looking for Mechanical and Physical Engineer- Drivability Development Engineer who will be carrying out and analysis of tests intended for the calibration or validation of the Driv ...
-
Software Development Engineer
1 week ago
AM General Auburn Hills, United StatesINTRODUCTION TO AM GENERAL · AM General develops and builds specialized ground vehicle systems that get the US Armed Services and our allies to and from their mission safely. Our innovative spirit delivers advanced, rugged, resilient, and dependable mobility solutions. We are on ...
-
Software Development Engineer
2 weeks ago
Shape Corp Auburn Hills, United StatesShape Process Automation, a SHAPE Technologies Group ("SHAPE") company is a global, high-tech engineering and process automation provider. We develop integrated manufacturing strategies and industrial automation solutions for Tier I and Tier II suppliers and beyond. Our comprehen ...
-
Software Development Engineer
2 days ago
AM General Auburn Hills, United StatesINTRODUCTION TO AM GENERAL · AM General develops and builds specialized ground vehicle systems that get the US Armed Services and our allies to and from their mission safely. Our innovative spirit delivers advanced, rugged, resilient, and dependable mobility solutions. We are on ...
-
Software Development Engineer
1 week ago
AM General LLC Auburn Hills, United StatesJob Description · Job DescriptionINTRODUCTION TO AM GENERAL · AM General develops and builds specialized ground vehicle systems that get the US Armed Services and our allies to and from their mission safely. Our innovative spirit delivers advanced, rugged, resilient, and dependab ...
-
Staff Development Engineer
1 day ago
LG electronics Troy, United StatesDriving better future mobility · Position Overview: · This position requires technical expertise in cutting-edge product development and manufacturing. It involves working closely with LG and automotive manufacturers, navigating high-tech products and industry standards. Key re ...
-
Senior Staff Development Engineer
3 weeks ago
ContiTech North America, Inc. Rochester Hills, United StatesTHE COMPANY · ContiTech North America, Inc. is one of the largest automotive manufacturers in the world and a leader in automated driving. Through our pioneering technologies and services, we're changing the future of mobility to make it more safe, smart, and sustainable. Our Roc ...
-
Radar Component Development Engineer
2 weeks ago
PSG Global Solutions Auburn Hills, United StatesThe Automated Driving Advanced Development team is actively searching for a Radar Component Development Engineer. This is a systems engineering position with a focus on sensors, particularly RADAR sensors. As the owner of the RADAR component within t Engineer, Development, System ...
-
Land Development Engineer
2 weeks ago
Gpac Warren, United States Full timeOur client is a local multidisciplinary civil engineering firm looking to add a Civil Engineer to their family-like team They work projects of all sizes, and properly manage them. They are known for having an incredible work environment and culture. This company gets you excited ...
-
Land Development Engineer
3 weeks ago
Gpac Warren, United States Full timeOur client is a local multidisciplinary civil engineering firm looking to add a Civil Engineer to their family-like team They work projects of all sizes, and properly manage them. They are known for having an incredible work environment and culture. This company gets you excited ...
-
RGBSI Auburn Hills, United StatesJob Responsibilities: · Lead the installation and commissioning of new powertrain test setups, including conventional combustion engine and hybrid configurations. · Identification and implementation of necessary connections, measurement points and instrumentation to support testi ...
Drivability Development Engineer - Auburn Hills, United States - Lyons Consulting Group
Description
Job Description
:We are looking for Mechanical and Physical Engineer- Drivability Development Engineer who will be carrying out and analysis of tests intended for the calibration or validation of the Drivability and Engine-Gearbox Intersystem functions (characterization of the powertrain, idle speed PIV, anti-lock, PIV IS, not exhaustive). Engaging in development missions (hot; cold; temperate; altitude) and is proficient in preparation and dissemination of reports, Acquisition data filing and store the analysis results into a database and examination of the issues encountered during the development process.
Key Responsibilities:
Required Skills:
Job
:Programmer/AnalystSchedule
:Full-timePrimary Location
:US-MI-Auburn HillsOrganization
:ERD PPL US
Drivability Development Engineer professionals in Auburn Hills
-
karthikeyan venkatesan
Software Design Release Engineer