Jobs

    Facilities Project Engineer - Texas, United States - BEPC Inc. - Business Excellence Professional Consulting

    BEPC Inc. - Business Excellence Professional Consulting
    Default job background
    Description

    BEPC is hiring a Facilities Project Engineer - Construction Safety Support in San Angelo TX

    W2 1 year contract with potential for extension.

    Job Overview:

    EHS issues associated with facility and process equipment construction range from managing permits appropriately to assessing building materials to accurately understand the hazards. Appropriate identification and definition of these issues can reduce the potential for cost growth during the construction process and/or risks of potential non-compliance and subsequent government issued fines.

    Experience should include facility construction experience and capital project support for the ETO Abatement Project in San Angelo, TX. Support is anticipated throughout the life cycle of a project. We are seeking proposals from companies that have a proven record of promoting effective planning, safe work execution, driving regulatory compliance, and preventing project cost and schedule creep.

    The role of the construction safety DRI will be, but not limited to, as follows:

    • Routinely monitor the contractor's EHS performance to verify that the Contractor is in compliance with their stated practices and procedures, regulatory requirements and any additional owner expectations/deliverables that may have been identified in the contract of work EHS Schedule.
    • Interface with and support the construction management team at the site by delivering current data on contractor EHS performance, including: trending, incident management, EHS metrics, and other key information that enable construction management to make informed and timely decisions.
    • Facilitate communications, including safety meetings and notices, to ensure relevant EHS information is communicated across the site by contractors and that management is included in those communications.
    • Conduct a weekly site safety walk with the contractor management representative.
    • Participate in a daily site safety walk with the contractor safety rep.
    • Act as a coach and advisor to the contractor safety committee.
    • Evaluate the completeness and effectiveness of the contractor's hazard assessments (JHAs, Good Saves etc.).
    • When non-compliance and/or non-conformance is observed, immediately bring the issue to the attention of that individual and key stakeholders as appropriate.
    • Verify key performance indices (KPIs), leading/lagging indicators, and EHS data submitted by the contractor are accurate, timely and complete.
    • Conduct the monthly contractor EHS audit.
    • Participate in progress and schedule meetings.
    • Assist in design reviews throughout the Life Cycle-planning, as requested/required (design, permitting, construction, cx, handover, etc.).
    • Attend client trainings as requested.
    • Evaluate/audit Site Specific Safety Plan to conformance to Project Manual requirements.
    • Understand and verify operational EHS requirements are adhered to.
    • Support client initiatives as requested.

    SCOPE OF WORK

    Support the ETO Abatement Project San Angelo, TX site. The project is expected to begin in June 2020 and terminate in July 2021. We anticipate the scope of work will be conducted primarily by an experienced construction safety consultant. We will assist in the day-to-day application of EHS/CSS program including inspections, safety and compliance walks, root-cause analysis, and contractor review. Construction work will be scheduled for day shift.

    Proposed 40 hours per week will be primarily focused to construction safety. Onsite work is expected to be 5 days per week on average.


  • WGA Consulting Engineers

    Project Engineer

    2 weeks ago


    WGA Consulting Engineers Texas, United States

    WGA is a Texas -based professional consulting firm that was founded in 2007, WGA has experienced steady growth in a competitive market. This expansion is a result of our strong commitment to our clients providing them with the highest quality of work and service. We built our pra ...

  • Flexicrew Technical Services

    Project Engineer

    2 weeks ago


    Flexicrew Technical Services Texas, United States

    Working closely with the Contracts Manager, this role is an integral part of the contracts management team, providing support to, and working with all parts of the business, including the sales, engineering, and production and project teams, plus other business management teams s ...

  • Lockheed Martin

    Project Engineer

    1 week ago


    Lockheed Martin Texas, United States Full time

    Job Description · We are Lockheed Martin · Lockheed Martin Aeronautics Company, home of the world-renowned Skunk Works, turns visionary aircraft into reality and is known for building the finest military aircraft in the world. This recognition is continually earned through our ...


  • Addison Group Texas, United States

    Position Summary: · This position is primarily responsible for developing mechanical engineering designs, technical specifications, equipment lists, general arrangements, failure analysis, engineering studies, creating standards / work practices, and process flow diagrams. Duties ...


  • talisman advisory partners Texas, United States

    This organization is looking for a Project Engineering Manager to oversee all project engineering operations. Throughout the project execution phase, this role must operate successfully in a collaborative, fast-paced setting and exhibit good project management, development, and e ...


  • Scott Humphrey Corporation Texas, United States

    Job Description: · The Construction Project Engineer will play a vital role in supporting the successful execution of construction projects from inception to completion. This role requires strong technical skills, attention to detail, and the ability to collaborate effectively wi ...


  • PRS Texas, United States

    Construction Project Engineer, Houston, TX · Exciting Opportunity for a Assistant Project Engineer with a Respected General Contractor in Houston, TX · We are currently seeking a highly qualified Project Engineer to join our esteemed General Contractor based in Houston, TX. The i ...


  • BEPC Inc. - Business Excellence Professional Consulting Texas, United States

    BEPC is hiring a Facilities Project Engineer - Construction Safety Support in San Angelo TX · W2 1 year contract with potential for extension. · Job Overview: · EHS issues associated with facility and process equipment construction range from managing permits appropriately to as ...


  • The Hansen Group, Inc. Texas, United States

    SUMMARY OF POSITION · Responsible for the implementation of capital investment projects, ensuring the achievement of the scope, budget and performance defined in the technical studies for piping designs from the conceptual to the detail engineering phases, calculation, drawings, ...


  • Russell Tobin Texas, United States

    Position Title: Senior Engineering Project Coordinator (Medical Devices) · Location: San Antonio, TX · Duration: Full-time, 1 Year contract (With a high possibility of conversion to permanent or contract being extended) · Start Date: Early June · Client Overview: Our client is de ...


  • MWM DesignGroup Texas, United States

    MWM DesignGroup is looking for an outstanding Civil Infrastructure Project Engineer in Training (EIT) · We offer a variety of project and client types, with a focus on public entities. Recent and ongoing projects include utilities, storm water modeling and infrastructure, roadway ...


  • Lockheed Martin Texas, United States

    Job Description · We are Lockheed Martin · What You Will Be Doing · As the F-35 Project Engineering Senior Manager you will be responsible for · providing comprehensive, integrated, and · executable engineering solutions supporting all · engineering product teams and Program · ...

  • H+M Industrial EPC

    Engineering Manager

    4 days ago


    H+M Industrial EPC Texas, United States

    Position Title: Engineering Manager · Reports to: Director of Engineering · Position Status: Permanent – Full Time · FLSA Status: Exempt · Location: Corpus Christi, TX · Work Schedule: Standard schedule is Monday through Friday. · Purpose: The Engineering Manager drives the exe ...


  • Career Collective Texas, United States

    This individual will perform roadway design on TxDOT highway projects under the supervision of a Project Manager and/or Roadway Task Leader. They may also work with others on civil design assignments as well. Preferably, this person is familiar with the TxDOT Specifications and T ...


  • CTS Complete Technical Services Texas, United States

    Lead Electrical Engineer (Houston, TX.) · *No C2C or 3rd party agencies · *USA work Authorization required · Lead a Team of Electrical Engineers and Electrical Designers on large Oil & Gas, FEED and EPC Projects · Develops project scope of work for electrical engineering and de ...


  • CTS Complete Technical Services Texas, United States

    Lead Electrical Engineer · Lead a Team of Electrical Engineers and Electrical Designers on large Oil & Gas, FEED and EPC Projects · Develops project scope of work for electrical engineering and design · Monitors and advises Department Manager of major project changes · Prepares d ...


  • CTS Complete Technical Services Texas, United States

    Instrument & Controls Engineer (Project Engineer) · *Please no C2C or third-party agencies · We have a need for a Control Systems (Project Engineer) with DCS experience, for an Oil & Gas (Refinery) project, located in Corpus Christi, TX. · Job Duties: · FEL Scopes, migrating olde ...


  • Insight Global Texas, United States

    NOTE: MUST BE A U.S. CITIZEN FOR THIS ROLE WILLING TO WORK ONSITE · Required Skills & Experience · Completion of high school or technical school with courses in computer-aided drafting or comparable experience · 5-10 years of experience as a drafting and engineering technician in ...

  • Affinity Management Group

    Process Engineer

    1 day ago


    Affinity Management Group Texas, United States

    EXCITING DIRECT HIRE OPPORTUNITY · Our Client, an EPC company in Houston, has an immediate need for a Process Engineer. In this role you will perform process engineering assignments associated with designing equipment, components, structures or systems for downstream projects (pe ...


  • PTS Advance Texas, United States

    Mechanical Project Manager- This position is in Tennessee · Client: Refinery · Location: Memphis, TN · Duration: Long Term Ongoing · Benefits: Health, Vision, Dental, 401K, Paid Time Off · Per Diem: YES · Role Description: · Position supports all aspects of projects from concep ...