- Understands accepted troubleshooting guidelines for PLC, control valves and all PLC logic.
- Design PLC programs according to cause and effect lists.
- Fundamentally understand process control from a programming perspective.
- Assist design engineer(s) with P&ID design from an instrumentation and control perspective.
- Possess overall knowledge of the installation, operation, repair, of assigned equipment.
- Maintains sufficient inventory of electrical supplies and repair parts to meet most emergency situations.
- Takes care of company vehicle, keeping it clean and organized.
- Reports any unsafe practices or actions to supervisor.
- Continues to look for better and more efficient ways of doing job.
- Keeps lines of communication open to supervisor and other company employees while meeting the needs of all customers.
- Makes callouts on equipment.
- Works with project managers, engineering and contractors on all new construction projects.
- Maintain all controls, monitor alarms and sensor tests.
- Troubleshooting and scheduling electrical maintenance for the assigned location.
- Solid understanding of electrical motor control.
- Knowledge of electrical prints and capable of making appropriate red-line changes to them.
- Supervise electrical contractors.
- Other duties as assigned.
- Good verbal and written communication skills
- Customer orientation
- Ability to effectively present information in a one-on-one and small group situation to other employees of the company and outside contractors
- Basic math skills (addition, subtraction, multiplication, division, fractions, decimals)
- Apply common sense understanding to carry out day-to-day operation issues
- Be able to make quick and reasonable decisions in sometimes-adverse conditions Certificates, licenses, registrations:
- Valid state operating license with acceptable driving record Physical demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Uses physical force to lift, push, pull and hold equipment/tools
- Climbs and works at various heights; may work in a standing, sitting, lying down, crouched or kneeling position
- Routinely reacts to visual, aural and other signals, including alarms and instructions, and is required to visually inspect work
- Regularly bends, stoops, moves from ground level to higher levels, raises/lifts from ground level a load up to 50 lbs., manually transports a load up to 75 lbs., and applies up to 150 foot pounds of torque
- Regularly gets into and out of vehicles and rides over rough roads
- Walks an average of 5 miles per day, up to 7 miles per day
- Candidates may be subject to Department of Transportation (DOT) drug and alcohol testing requirements
- Subject to overtime and callouts Working conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Works mostly outdoors, in and around mechanical, industrial and electrical equipment
- Required to climb about equipment and work in confined areas (i.e., tanks, between compressors, vessels)
- May be subject to work in hazardous conditions including hydrocarbon vapor, adverse weather conditions, and extreme temperatures
- Wears safety equipment as required
-
E&C Technician
3 weeks ago
Kinder Morgan Williston, United StatesThe E&C technician is responsible for electrical maintenance and new construction at all company facilities. The technician should be familiar with NEC standards for wiring, and company specific standards for calibration and maintenance of all instrumentation at company facilitie ...
-
E&C Technician
3 weeks ago
Kinder Morgan Alexander, United StatesEssential Duties & Responsibilities: · • Understands accepted troubleshooting guidelines for PLC, control valves and all PLC logic. · • Posses overall knowledge of the installation, operation, repair, of assigned equipment. · • Maintains sufficient inventory of electrical supp ...
-
I&E Technician
3 days ago
Chord Energy Williston, United States Full timeThe I&E Technician is responsible for the maintenance and repair of all instruments, control systems and electrical equipment in and around the plant/pipeline. The I&E Technician performs work of high skill in the inspection, calibration, repair, testing, adjustment, installation ...
-
I&E Technician
5 days ago
Wood PLC Williston, United StatesJOB DESCRIPTION · Authorization to work lawfully in the US without sponsorship from Wood is required. · RESPONSIBILITIES · Technician will have the skills and knowledge required to install, troubleshoot, and maintain plant/field instrumentation and equipment. This includes but no ...
-
I&E Technician
3 weeks ago
Chord Energy Williston, United StatesPosition Summary · The I&E Technician is responsible for the maintenance and repair of all instruments, control systems and electrical equipment in and around the plant/pipeline. The I&E Technician performs work of high skill in the inspection, calibration, repair, testing, adjus ...
-
I&E Technician
3 weeks ago
Wood PLC Williston, United StatesAuthorization to work lawfully in the US without sponsorship from Wood is required. · Technician will have the skills and knowledge required to install, troubleshoot, and maintain plant/field instrumentation and equipment. This includes but not limited to transmitters, valves, sw ...
-
I&C Board Technician
3 weeks ago
Bergaila & Associates, Inc. Alexander, United StatesWe put the unity in "opportunity." Opportunity Snapshot:Location: Alexander, ND - Duration: 6 months Work Schedule: 5/2 Pay Rate: $42 - $50/hr. Benefits: Comprehensive insurance, 401(k) program, PTO & Holidays and Company vehicle Responsibilities Wor Technician, Operations, Monit ...
-
I/E Technician
4 weeks ago
Targa Resources Watford City, United States Full timeJOB FUNCTIONS AND KEY RESPONSIBILITIES: · Learn and understand Targa's Safety Policies and Procedures and Business Ethics Policies. Plan and perform all assignments in a safe manner by utilizing the proper tools, safety and environmental precautions, permitting, and Process Safet ...
-
Heavy Equipment Field Technician
3 weeks ago
Tractor & Equipment Williston, United StatesThis is a key role in our company in which our field technicians are responsible for diagnosing and repairing of Caterpillar equipment including removing, repairing, assembling and installing. You will need to diagnose and troubleshoot engines, powertrains, electrical and hydraul ...
-
Technician - Diesel & Natural Gas Engine
3 weeks ago
Tractor & Equipment Williston, United StatesHarnish Group Inc. is the Caterpillar Dealer in central and western Washington, central and eastern Montana, northwestern Wyoming, northwestern North Dakota and the state of Alaska. Our Member Companies are N C Machinery Co., NC The Cat Rental Store, N C Power Systems Co., Tracto ...
-
Facilities Maintenance Technician
2 weeks ago
Casella Waste Systems, Inc Williston, United States Regular Full timePosition Summary · The Facilities Maintenance Technician utilizes knowledge of mechanical, electrical and hydraulic equipment to install, maintain, troubleshoot and repair machinery or equipment, diagnose issues with machinery components and determine when adjustments or repair ...
-
A.C. Hathorne Williston, United StatesWe're Hiring · Commercial Roofers · Laborers · Service Technicians · Summer Warehouse Personnel · On site/In-house Training · Full-time, year-round employment · Medical/Dental/Vision Benefits, 401K · Annual Bonus – Above Average Wages · 252 Avenue C, Williston, VT 05495 · EOE/m/f ...
-
Diesel Technician
3 weeks ago
Synerfac Williston, United StatesA Waste Company in Williston Vermont is looking to hire a Diesel Technician. The A level Diesel Technician would primarily be performing Repairs and Preventative Maintenance on Trucks and Heavy Equipment. This position offers a flexible shift and responsibilities/pay according to ...
-
Diesel Mechanic
3 weeks ago
Casella Waste Systems Williston, United StatesPosition Summary: · The Diesel Mechanic maintains diesel equipment, completes inspections and preventive maintenance requirements, corrects vehicle deficiencies, completes adjustments and alignments, and maintains records to ensure we are able to keep our level of commitment to ...
-
Electrical and Instrumentation Engineer
1 week ago
The Bergaila Companies Williston, United StatesWe put the unity in "opportunity." · Opportunity Snapshot: · Compensation: $100-125/hour · Location: Williston, ND · Work Schedule: M-F / 40 hours · Assignment Duration: 6 months+ · Benefits: Comprehensive insurance with 401K, PTO and Holidays · Qualifications: · Bachelor's or MS ...
-
Mechanic
3 weeks ago
Noble Casing Inc Williston, United StatesJob Type · Full-time · Description · Summary · Under general supervision, performs preventive maintenance services and inspects, diagnoses and repairs trucks and equipment. · Essential Duties and Responsibilities include the following. Other duties may be assigned. To perform ...
-
Casing Team Leader
4 weeks ago
Noble Casing Inc Williston, United States: Job DetailsReports To: Casing Operations Supervisor and District ManagerScope of WorkDirect the activities of Service Technicians in the delivery of casing and tubing services.Duties & Responsibilities: These are not listed in relation to their priority or importance.Runs the C ...
-
Casing Team Leader
3 weeks ago
Noble Casing Inc Williston, United StatesJob Details · Reports To: Casing Operations Supervisor and District Manager · Scope of Work · Direct the activities of Service Technicians in the delivery of casing and tubing services. · Duties & Responsibilities: · These are not listed in relation to their priority or impo ...
-
Casing Team Leader
1 week ago
Noble Casing Inc Williston, United StatesJob Details · Reports To: Casing Operations Supervisor and District Manager · Scope of Work · Direct the activities of Service Technicians in the delivery of casing and tubing services. · Duties & Responsibilities: These are not listed in relation to their priority or importa ...
-
Casing Team Leader
1 week ago
Noble Casing Inc Williston, ND, United States Full time: Job Details · Reports To: Casing Operations Supervisor and District Manager · Scope of Work · Direct the activities of Service Technicians in the delivery of casing and tubing services. · Duties & Responsibilities: These are not listed in relation to their priority or imp ...
E&C Technician - Williston, United States - Kinder Morgan
Description
The E&C technician is responsible for electrical maintenance and new construction at all company facilities.The technician should be familiar with NEC standards for wiring, and company specific standards for calibration and maintenance of all instrumentation at company facilities.
The technician will also be responsible for installation and maintenance of all company communications equipment.The technician in this position will be occasionally called out by the company control center when there are problems with instrumentation or electrical equipment.
Essential duties and responsibilities:
adherence to state, federal and local laws and regulations; adherence to all company policies and procedures; practice of company core values; safety in the forefront of every task performed.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.