- Applies comprehensive technical knowledge to solve complex problems: those typically solved by properly interpreting maintenance manuals or similar documents.
- Assists in the design of minor hardware system modifications and software programs to stay current with aircraft configuration and to improve simulator operability.
- Provides technical guidance and training to Technician I and II employees.
- Conducts quality control inspections and inspect maintenance work performed.
- Maintains required documentation of maintenance activities. Monitor and track the repair status of inoperative equipment and document maintenance activities.
- Works with Engineering in regards to non-standard situations.
- Recommends changes based on knowledge and past experience.
- Uses knowledge of simulator and aircraft systems to interpret advanced technical data.
- Interrupts and works with computer systems utilizing various and multiple operating systems.
- Diagnose malfunctions of computers and associated equipment and performs operability/readiness tests and repair.
- Perform systems interface/fault isolation.
- Apply fundamental troubleshooting procedures in the maintenance of interfaces and peripheral equipment used with computers; interpret mechanical, hydraulic, electrical and electronic schematics and drawings and make simplified versions.
- Conducts voice communications on inter-phone and radio circuits
- Provides networking and information systems support on training devices and networks.
- Maintains good relations with customers and ensures information flows within technical organization.
- Implements basic modifications to existing simulators.
- Other duties as assigned.
- U.S. citizen.
- Minimum five (5) years of related experience in the maintenance, troubleshooting, repair, and operation of simulators or an equivalent combination of technical education related to electronics, electromechanical, computer, aviation, or simulation technology and/or hands-on work experience in the maintenance and operation of full flight simulators that total a minimum of 7 years.
- Knowledge of commonly-used concepts, practices, and procedures within a particular field.
- Must meet the minimum education, experience, and qualifications of Simulator Technician II
- Knowledge of commonly-used concepts, practices, and procedures within a particular field.
- Related skill areas should include technical writing and presentation skills
- Must be highly proficient in the use and operation of test equipment to perform pre- and post-operational test on installed equipment to perform preventative maintenance using preventative maintenance cards and instruction books.
- Must possess advanced skills necessary to diagnose and isolate malfunctions in electronic systems; align, adjust, and calibrate installed training devices; interpret mechanical, hydraulic, electrical, and electronic schematics and prepare simplified versions.
- Must possess advanced skills to perform calibrations, adjustments, and tests on electronic equipment; analyze operation, verify discrepancies, isolate malfunctions and replace defective components used in installed devices.
- Must possess and maintain advanced proficiency in the use of diagnostic programs, interpretation of results, and the use of program listings to isolate faults and be adept in the use of test equipment, repair of micro/miniature printed circuit boards, electro/mechanic systems and devices to include projection display systems, computer controlled motion and electronic control loading systems and computer generated sound systems.
- Must be highly proficient in the use of diagnostic programs, interpretation of results and the use of program listings to isolate faults.
- Must be skilled at the use and operation of test equipment, including "O" scopes, frequency counters, volt/ohm meters, and range calibration set.
- Must be able to perform routine preventative maintenance using maintenance requirement cards and instructional manuals.
- Must be proficient in Microsoft Office
- Must be able to work overtime as required
-
Diesel Technician/Mechanic III
4 days ago
Penske Truck Leasing Farmington, United States Full time700 E Murray Dr, Farmington, NM 87401 · What's the Job? · Ready to accelerate your career while helping our customers move forward? As a Technician at Penske, you'll do exactly that. Here, you'll do preventative maintenance and minor repairs on the newest and best maintained flee ...
-
Diesel Technician/Mechanic III
2 weeks ago
Penske Truck Leasing Farmington, United States Full time700 E Murray Dr, Farmington, NM 87401 · What's the Job? · Ready to accelerate your career while helping our customers move forward? As a Technician at Penske, you'll do exactly that. Here, you'll do preventative maintenance and minor repairs on the newest and best maintained flee ...
-
Diesel Technician/Mechanic III
2 weeks ago
psg Warren, United StatesDiesel Technician/ Mechanic III - Entry Level (Job Number: Whats the Job? Ready to accelerate your career while helping our customers move forward? As a Technician III at Penske, youll do exactly that. Here, youll do preventative mainten Mechanic, Technician, Diesel, Entry Level, ...
-
Diesel Technician/Mechanic III
1 week ago
PSG Global Solutions Wixom, United StatesDiesel Technician/ Mechanic III - Entry Level (Job Number: Whats the Job? Ready to accelerate your career while helping our customers move forward? As a Technician III at Penske, youll do exactly that. Here, youll do preventative mainten Mechanic, Technician, Diesel, Entry Level, ...
-
Data Center Technician III
1 week ago
IES Communications Sterling, United States Full timeJob Summary: · The Data Center Technician III will support both the Physical and Virtual Infrastructure of the organization or customer and its facilities. The Data Center Technician will contribute to design and intentions of and implement data center best practices. This shall ...
-
Biomedical Equipment Technician III
2 weeks ago
Corewell Health Troy, United StatesJob Summary · Repairs, installs, and performs preventive maintenance, performance assurance, pre-purchase evaluation, incoming inspection and calibration of medical equipment and systems. Performs varied clinical engineering functions such as technology management and technical ...
-
Field Service Technician III
1 week ago
Rivian Madison Heights, United StatesInitially help support pre-production vehicle builds, including assisting cross functional teams Travel to locations to support as required until the local Service Center opens, including but not limited to, production plant Operate remotely until th Field Service Technician, Ser ...
-
Level III NDT Technician
1 week ago
Barnes Aerospace Troy, United StatesJob Description · Job DescriptionThis position is responsible for the directing and implementing of NDT personnel training, qualifications, and certifications in Fluorescent Penetrant (FPI or PT) and Radiographic (X-Ray or RT) inspection methods in accordance with MB Aerospace Wa ...
-
Level III NDT Technician
10 hours ago
Barnes Aerospace Shelby Charter Township, United States Full timeThis position is responsible for the directing and implementing of NDT personnel training, qualifications, and certifications in Fluorescent Penetrant (FPI or PT) and Radiographic (X-Ray or RT) inspection methods in accordance with MB Aerospace Warren procedures and any additiona ...
-
Wind Field Service Technician III
1 week ago
NextEra Energy Sterling City, United StatesRequisition ID: 80365 · NextEra Energy Resources is the world's largest generator of renewable energy from the wind and sun, and a world leader in battery storage. We provide energy-related products and services that grow our economy, protect the environment, support our communi ...
-
Nuclear Instrument Technician I/II/III
1 week ago
VetJobs Waterford, United StatesJob Description · ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spous ...
-
Associates Systems LLC Sterling, United StatesAll qualified candidates will be responded to within 24hours or less. Electronic Technician III PRIMARY DUTIES AND RESPONSIBILITIES: Under minimal supervision, performs routine technical functions related to the support of development engineering activities such as assemble, test ...
-
Ct S-2/d-2 Project Installation Technician
4 days ago
Tradesmen of NE Bloomfield, United StatesProject Technician · Currently hiring an experienced and licenced HVAC Technician/Installer to accommodate our customers throughout Connecticut and Massachusetts with HVAC project-based work. A current CT D-2 or S-2 Licence is required. · - Meet with management to kick off instal ...
-
Data Technician
4 days ago
Trion Solutions Sterling Heights, United StatesNOTE: The data technicians will work Sunday evenings (may vary with production schedules) through Thursday. Sunday's both will be on evenings but Monday through Thursday one will be evenings and the other day shift. · 22 +/- depending on experience · Overview: · **Responsibilitie ...
-
Froehling and Robertson, Inc. Sterling, United States**Froehling & Robertson, Inc., (F&R) **is looking to hire **_experienced_** (at least one year of relevant experience) engineering technicians and inspectors to perform construction materials testing and inspection services on projects throughout the greater Northern Virginia are ...
-
Paint Booth Technician
4 days ago
Trion Solutions Sterling Heights, United StatesJob Overview: · **RESPONSIBILITY**: · Assist with the technical functions of day-to-day operations at the plant level facility. · **GENERAL TASKS**: · - Daily collection of data to include: · - Pit Water Chemistry: TSS, PH, Turbidity, Conductivity, and etc. · - Take Airflow Readi ...
-
Diesel Mechanic
1 week ago
THE KENAN ADVANTAGE GROUP Warren, United States Full timeJob DetailsJob Location20060 Warren PA - Warren, PAPosition TypeTechnicianTravel PercentageNegligibleJob Shift8hrDescriptionKAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food pro ...
-
registered nurse
2 weeks ago
Henry Ford Health System , MI, United StatesUnit Overview: · The Emergency Department at Henry Ford Wyandotte Hospital is a Community-based teaching ED situated within Downtown Wyandotte. The ED sees over 45,000 patients per year and boasts 42 rooms including 5 Mental Health Secured Unit, and 3 Trauma Bays. HFWH is a Prim ...
-
registered nurse-emergency department
3 weeks ago
Department of Veterans Affairs , MI, United StatesSummary · The LTC Charles S. Kettles VA Medical Center is seeking a Full-Time Registered Nurse assigned to the Emergency Department (ED) aligned under Patient Care Services. The ED Registered Nurse is responsible and accountable for all elements of the nursing process when provid ...
-
Weld Technician
1 week ago
Spark Talent Inc Warren, United StatesJob Description · Job Description · Weld Technician · About the CompanySpark Talent Acquisition is a Michigan-headquartered recruiting and staffing company that connects great talent with great employers. We understand that finding a new position can be stressful and identifying ...
Simulation Technician III - Lake Orion, United States - OT Training Solutions
1 week ago
Description
Job Description
Job DescriptionLocation: 16 month assignment – 4 months in Dearborn, Michigan, 12 months in Croatia
Summary/Scope of Work
The Simulation Technician III applies advanced knowledge and experience to solve unusually complex or system problems; those that typically are not able to be solved solely by reference to maintenance manuals or similar documents. Incumbent will implement training plans for Technicians I and II and evaluate their progression. Technician III will document training forms as required. At this level, the incumbent has demonstrated the ability to solve a variety of complex simulator problems.
Job Functions / Responsibilities
Required Qualifications and Skills
Required Education or Experience:
Associate's Degree in Electronic Technology or ten (10) years of related work experience.
Disclaimer
The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed, and perform special projects as assigned.
OT Training Solutions, LLC is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status or disability status.