Dimensional Inspector - Whittier, United States - Miller Castings INC

Miller Castings INC Whittier, United States

4 weeks ago

Show more Collapse job

Description

Job Description

Examines castings for conformance to engineering drawings and related documents for dimensional accuracy.

Essential Duties and Responsibilities The essential functions include but are not limited to the following: include the following. Supervisor may assign other duties. Examines castings for conformity to design/drafting standards. Performs all work according to written work procedures, and verbal and written instruction. Dimensionally examines castings, fixtures, gauges and hand tools and measuring equipment necessary. Verify that all devices, requiring calibration and measurement, meet the required criteria. Performs visual inspection of parts and equipment to ensure conformance to quality standards and to identify non-conformance where it occurs. Records quantity of material approved and rejected on route cards. Determine what actions to take when problems occur and know where to find the resources.

Pay rate: $16.90

Minimum Qualifications (Knowledge, Skills, and Abilities)

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Requires excellent mechanical aptitude.
Must have proficient knowledge of using English and Metric Systems of measurement
Good mathematical skills.
Ability to analyze and problem solve.
Must be able to communicate on all levels.
Superior attention to detail and precision skills required.
Ability to document and coordinate corrective measures.
High School Diploma / GED.
Some previous work experience may be required for this position.
English grammar, spelling, and punctuation skills required
Work experience.2 years' work experience may be substituted for education.

Physical Demands and Work Environment

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions.

Minimal to Moderate-this position will usually require standing, walking
Regularly lifts 35 lbs
This job does require some repetitive motions of the hands and fingers to perform the calculating, measurement and data entry functions
Characteristics-noise level is usually moderate
Specific Vision abilities required by this job includes near vision 20/20 or 20/25

Note

This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship.

We have other current jobs related to this field that you can find below

Dimensional Inspector

1 month ago

RD Rubber Technology Corporation Santa Fe Springs, United States Full time

Job Title: Quality Control Level III Dimensional Inspector. · Reports To: Engineering & Quality Manager. · Summary: Responsible for enforcing company the Quality Management System, performing effective and efficient quality inspection of materials and goods. · Duties and Responsi ...
Visual/Dimensional Inspector

3 weeks ago

Miller Castings INC Whittier, United States

Job Description · Job DescriptionPosition Summary · Inspect parts in the manufacturing process against drawing requirements and applicable inspection techniques to determine conformance utilizing applicable inspection tools. · Pay Rate: $ $23.00 per hour · Essential Duties and R ...
Visual/dimensional Inspector

3 weeks ago

Miller Castings INC Whittier, United States

**Position Summary** · Inspect parts in the manufacturing process against drawing requirements and applicable inspection techniques to determine conformance utilizing applicable inspection tools. · **Pay Rate: $ $23.00 per hour** · **Essential Duties and Responsibilities** · The ...
Dimensional Quality Inspector

3 weeks ago

Uptime Source LLC Fullerton, United States

Job Description · Job Description12pm Start time - Monday-Friday plus OT Saturdays · Job Overview: · We are seeking a meticulous 2nd shift Dimensional Quality Inspector to join our team. The ideal candidate will be responsible for ensuring that products meet the required quality ...
Receiving Inspector

2 weeks ago

Express Employment Professionals El Monte, United States

Job Description · Job DescriptionWe seek a quality-focused Receiving Inspector to perform dimensional and visual inspections of machined metal parts in a manufacturing setting. · You'll work closely with our tight-tolerance machine shop using precision tools to validate specifica ...
PCB Inspector

2 weeks ago

Amtec Inc. Brea, United States

INSPECTOR · Industry: Electronics · REQUIREMENTS · Minimum 3 years of experience in SMT and/or Through Hole inspection. · IPC-A-610 and J-STD-001 Certification or previously certified. (expired certs will be reviewed) · Electronics 1st article inspections · Proficient with using ...
Receiving Source Inspector

2 weeks ago

Verify Inc. Fullerton, California, United States Permanent

Overview: · Industry: Aerospace/Defense · Position: Receiving Inspector / Source Inspector · Location: Fullerton, CA · Duration: 90 days · Frequency: 40 hours a week · Pay: $30-$32/hour · Job Description: · The selected candidate will provide advanced inspections using precision ...
Inspector

2 weeks ago

ACROMIL LLC Rowland Heights, United States

Job Description · Job DescriptionCareer Opportunity – Quality Control Mechanical Inspector - Acromil LLC – City of Industry · Our Company · Using state-of-the-art technology, Acromil, LLC in City of Industry, CA has been a primary supplier to the Commercial and Defense Aerospace ...
Lead QC Inspector

3 days ago

Hydro Fitting Mfg. Corp. Covina, United States

Job Description · Job DescriptionEstablished Aerospace company hiring a Lead Quality Control Inspector · Skills and Qualifications: · Expert in GD&T and MIL-Spec Drawings · Knowledge of AS9100, Internal Audits, AS9102 · Expert at Dimensional Checking of Aerospace CNC Machined Par ...
Quality Engineer

2 weeks ago

360 Recruiter Accelerator Covina, United States

QUALITY ENGINEER · Role Description · Our Aerospace and Defense client seeks a Quality Engineer (QE) in Southern California. Leading and supervising a team of quality control inspectors, the QE will be responsible for contributing to the overall improvement of the Quality Contro ...
QC Inspector 3

15 hours ago

Data Electronic Devices Brea, United States

Job Description · Job DescriptionVeris Manufacturing (an Emerald Technologies company) has an exciting opportunity for a QC Inspector 3 to join its Brea, CA team The QC Inspector's core function is to perform perform visual, electrical and dimensional inspection of printed circui ...
CMM Programmer

3 weeks ago

CPP- Rancho Cucamonga Rancho Cucamonga, United States Full time

JOB SUMMARY · The Dimensional/Layout Inspector / Computerized Measuring Machine (CMM) Programmer Level I carries out the following responsibilities: Run CMM pre-existing programs, create new Part programs, ability to read blue prints, Interprets Geometric Dimensions and Tolerance ...
Quality Control Inspector

1 week ago

System Soft Technologies Los Angeles, United States

N. Hollywood, CA · Job Summary: · The Quality Inspector conducts mechanical and dimensional inspections using calipers, micrometers and various gauges in a manufacturing environment. · Responsibilities: · Conducts Dimensional & Mechanical Inspections · Oversees the satisfactory r ...
Quality Inspector

1 week ago

Amtec Contract Brea, United States

Job Description · Job DescriptionResponsibilities: · Perform visual and dimensional inspections of printed circuit board assemblies to ensure workmanship which complies with the appropriate requirements from engineering drawings, process specifications, IPC-610 standards, J-STD-0 ...
Quality Control Inspector SIGN ON BONUS

6 days ago

Curtiss Wright Brea, United States Full time

Quality Control Inspector **SIGN-ON BONUS** · Our Brea, CA is looking for a Quality Control Inspector to join their team As our QC Inspector, you will perform a variety of dimensional and visual inspections checks and tests for machine parts. · Location: Brea, CA · Salary Range: ...
2nd Shift Inspector

1 week ago

Stanley Black & Decker Brea, United States Full time

Job Description · MF3760: Inspector · Dimensional Quality Inspector · Come Build The World With Us · This is the career you've been waiting for your whole life. Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team en ...
Quality Control Inspector

1 day ago

JAB Recruitment Los Angeles, United States

Overview: · The QC Inspector will work closely with departmental managers, production staff, and suppliers you will take responsibility to ensure quality, aiming to minimize the costs of reworking or waste and maximize customer satisfaction with our products. You will have the op ...
CMM Inspector

2 weeks ago

PrideStaff Los Angeles, United States Direct Hire

CMM Inspector · Our client is the world aerospace leader in dedicated lean-cell manufacturing. They are a privately held company with a 50+ history in precision aerospace manufacturing. They are lookin for a Coordinate Measuring Machine (CMM) Operator. In this role, you are respo ...
Quality Inspector II

1 week ago

Carlisle Interconnect Technologies Artesia, United States Full time

Company Information · Headquartered in St. Augustine, FL, with offices and manufacturing facilities all around the globe, Amphenol CIT is one of the world's leading designers and manufacturers of high-performance wire, cable, and medical devices. We provide complete interconnect ...
Quality Inspector

2 weeks ago

Stanley Black & Decker Brea, United States

Quality Inspector · Come Build The World With Us · This is the career you've been waiting for your whole life. Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in ...