Manufacturing Engineer - Bethel, United States - Resonetics

Resonetics Bethel, United States

3 weeks ago

Description

Overview:

Introducing and establishing new systems and technology to facilitate the Production and Manufacturing of Nitinol Tube/Wire for Resonetics. Systems will pertain to Drawing, Heat Treating, Finishing, and other manufacturing processes. The Manufacturing Engineer will act as a technical liaison between Quality and Production.

This position will concentrate primarily on establishing and improving efficiencies in the manufacturing of Nitinol Tube/Wire. Additional areas of focus may include but are not limited to: setup reduction, operator training, statistical process control, tool design or selection, and performance metrics. Other daily responsibilities will include Router and Work Instruction generation, participation with quality in customer assistance, and designing continuous improvement plans for current production jobs. An important aspect of this position is the hands-on nature of this role. As improvements are identified, it will often be the responsibility of this individual to actually implement and re-qualify any changes.

Responsibilities:

Introduce and set-up manufacturing capacity for Nitinol Tube/Wire manufacturing.
Review existing process procedures for compliance to the designed process intent. Modify procedures as necessary and obtain approval from required cognizant engineers and change review board.
Develop and improve Production yields through the identification and implementation of new process controls and determine their effectiveness.
Work with manufacturing personnel to promote Lean Principles in the design and planning phase of the product.
Thoroughly document tasks including creation of required prints, work instructions, specifications, and Engineering studies and reports.
Troubleshoot manufacturing issues and develop a plan to contain, correct, and put preventive/corrective actions in place to reduce the possibility of reoccurrence.
Take ownership of manufacturing of products as they pass through the final stages of production readiness to ensure that quality awareness and product integrity are maintained into production. Assist with creation of Flow Charts, PFMEAs, and Control Plans for products transferring to production.
Develop understanding of key factors in Nitinol tube production (e.g. mechanical properties, dimensional control, etc) to become a subject matter expert.
Provide technical support for machine validation activities to insure a smooth transition into the production environment.
Constructively communicate with operators and other departments.
Serve as a leader and mentor in order to foster a culture of best Engineering and Safety practices.
For all work and development, the individual considers and appreciates Good Manufacturing Practices (GMP) as an evident part of all processes. The individual must also be a strong supporter of GMP and make it a personal goal to establish such a mind-set.
Determine job cost baselines and initiate cost reduction activities.
Provide assistance in job setup and process training for operators.
Weekly/monthly reporting of activities and chosen performance attributes.
Periodic Customer liaison for quality or continuation of engineering related issues. May assume project manager role for specific customer applications.
Apply statistical methods such as Design of Experiments, SPC, Capability Studies, etc

Qualifications:

BS or MS in Engineering with a minimum (2) years related experience, capable of working in a dynamic, fast paced environment.
Must be proficient with MS Office.
Must possess solid mechanical troubleshooting abilities.
Must demonstrate good oral and written communication skills.
Strong organizational, analytical, and planning skills with the ability to multi-task
Must be extremely flexible regarding priority changes.
Individual must be fluent in speaking, reading and writing English.
Must have the ability to read, analyze, and interpret procedures and/or safety manuals.

Manufacturing Engineer

3 weeks ago

Amphenol RF Danbury, United States

JOIN OUR TEAM @ AMPHENOL RF, · the world's largest manufacturer of coaxial interconnect products for radio frequency, microwave, and data transmission applications, and a proven leader in enabling next-gen technology Our global team of experienced engineers develops innovative s ...
Manufacturing Quality Engineer

3 days ago

Arcmed Danbury, United States

The Quality Engineer is a working member of the Quality team whose primary responsibilities are listed below. They will report to the Quality Manager and ensure that Arcmed is compliant with its own standardized processes and procedures. Promote quality across the entire company ...
Senior Manufacturing Engineer

2 hours ago

SES Government Solutions Danbury, United States

Job ID:108642 · The Leonardo DRS Naval Power Systems business is a trusted provider of innovative naval gas and hybrid power systems, control technology and support solutions for the U.S. Navy and navies around the world. · Naval Power Systems' commitment to and investment in our ...
Senior Manufacturing Engineer

4 days ago

Leonardo DRS Danbury, United States

Job ID:108642 · The Leonardo DRS Naval Power Systems business is a trusted provider of innovative naval gas and hybrid power systems, control technology and support solutions for the U.S. Navy and navies around the world. · Naval Power Systems' commitment to and investment in o ...
Manufacturing Quality Engineer

1 week ago

arcmed Danbury, United States

The Quality Engineer is a working member of the Quality team whose primary responsibilities are listed below. They will report to the Quality Manager and ensure that Arcmed is compliant with its own standardized processes and procedures. Promote quality across the entire company ...
Electrical Manufacturing Engineer D

3 days ago

ARKA Group Danbury, United States

Position Overview: The Production Engineering Department is seeking an Electrical Manufacturing Engineer to work with IPT (Integrated Product Teams) to usher the product through the manufacturing process to delivery. The successful candidate will possess the ability to influence, ...
Electrical Manufacturing Engineer D

2 hours ago

Danbury Mission Technologies Danbury, United States

Position Overview: The Production Engineering Department is seeking an Electrical Manufacturing Engineer to work with IPT (Integrated Product Teams) to usher the product through the manufacturing process to delivery. The successful candidate will possess the ability to influence, ...
Electrical Manufacturing Engineer

3 weeks ago

Bernard Nickels & Associates Danbury, United States

PLC Programming · Electrical Background and · Some CAD design experience · The information below covers the role requirements, expected candidate experience, and accompanying qualifications. · The Senior Electrical Engineer will report directly to the Manager of Process Eng ...
Manufacturing Quality Engineer

3 weeks ago

Katalyst HealthCares & Life Sciences Danbury, United States

Roles & Responsibilities:Oversee CAPA, work with Manufacturing, Operations and Engineering to assist with containment, root cause analysis, corrective action, and preventive action. Conduct effectivity checks for CAPAs. · Return Material Authorizations, supports RMA requests from ...
Manufacturing Engineer

2 weeks ago

Northeast Scientific Waterbury, United States

What will you be stepping into? · A production environment that has been successfully reprocessing 1st of their kind FDA 510(k) cleared complex single use medical devices for 15 years. · Are you a manufacturing engineer who is OK getting their hands dirty and is looking to pivot ...
Manufacturing Engineer

4 days ago

Nissha Medical Technologies Norwalk, United States

PURPOSE/SUMMARY · The Manufacturing Engineer will support the day to day operation of the value stream. Assist more experienced engineers through various tasks including but not limited to the optimization of processes for manufacture and product flow including down time mitigat ...
Manufacturing Engineer

3 weeks ago

NESC Staffing Shelton, United States Temp

· Essential Duties and Responsibilities:Lead the transition from new product development to manufacturing. · Provide daily manufacturing support for existing products and develop, implement, and improve processes. · Drive continuous improvement through operational efficiencies a ...
Manufacturing Engineer

1 week ago

Katalyst Healthcares & Life Sciences North Haven, United States Contract

Responsibilities: Travel to supplier sites as required. International travel required. · Mentor and guide less experienced employees for professional development and advancement. · Continue to enhance engineering and leadership skills through additional training, developmen ...
Manufacturing Engineering Co-Op

1 week ago

Resonetics Bethel, United States

Overview: · This position will support the Manufacturing Engineering group typically working as an assignee on smaller scale Manufacturing Engineering projects or tasks related to larger scale Manufacturing Engineering projects. · The duration of this position will be from June ...
Manufacturing Engineer

3 days ago

Actalent Monroe, United States

NOW HIRING - an immediate opening for a talented Manufacturing Engineer for a world-class manufacturer and innovative polymer solutions provider for the medical device and biotech industries. Working in a team environment, this individual will ensure that automated manufacturing ...
Manufacturing Engineer

1 week ago

Advanced Technology Innovation Wilton, United States

Manufacturing Engineer (Electronics) · Manufacturing test experience: experience in PCB visual and functional testing, In-Circuit Test (ICT) and cable testing (as a minimum). · Manufacturing processes experience: detailed knowledge of manufacturing techniques for cables/connector ...
Manufacturing Engineer

1 week ago

The Toro Company Beatrice, United States

NOTE-Applicants must be legally authorized to work in the United States. We are unable to sponsor or take over sponsorship of an employment visa at this time. · Who Are We? · Exmark, located in Beatrice, Nebraska is a division of The Toro Company. Exmark is the leading manufac ...
Electrical Manufacturing Engineer D

2 weeks ago

Danbury Mission Technologies Danbury, United States

Position Overview: · The Production Engineering Department is seeking an Electrical Manufacturing Engineer to work with IPT (Integrated Product Teams) to usher the product through the manufacturing process to delivery. The successful candidate will possess the ability to influen ...
Manufacturing Engineer

1 week ago

Actalent Shelton, United States

Job Summary: · We are seeking an experienced and skilled Manufacturing Engineer to join our team. The successful candidate will be responsible for designing, developing, and implementing manufacturing processes and systems to improve productivity, quality, and efficiency. This i ...
Manufacturing Engineer

1 week ago

Toro Company Beatrice, United States

Who Are We? · Exmark, located in Beatrice, Nebraska is a division of The Toro Company. Exmark is the leading manufacturer of commercial mowers and equipment for the landscape professional. Exmark mowers are trusted 2-to-1 over the next best-selling brand of zero-turn mowers by l ...