Avionics Quality Inspector - Cape Canaveral, United States - SIDUS SPACE, Inc.

SIDUS SPACE, Inc. Cape Canaveral, United States

3 weeks ago

Full time

Description

The vision at Sidus is to make space accessible to everyone by increasing the viability of low-cost access to space. At Sidus, our whole is greater than the sum of our parts. The Sidus team is made up of highly talented individuals, each contributing their own experience, knowledge, skills, and ideas. It is our team that sets us apart from our competition and makes our mission of Bringing Space Down to EarthTM.

At Sidus we treat each day like it's Day One. We operate with a sense of urgency; we are customer obsessed, always learning and constantly evolving. Join our team and be a part of something great

Job Summary

The Avionics Quality Inspector is responsible for Quality Assurance inspections in support of fabrication, assembly, installation of cable harnesses, satellite assembly, and electronic assemblies.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite in Cape Canaveral, Florida.

Essential Duties and Responsibilities

Performs Quality Assurance inspections for fabrication, assembly, installation and test of wire and fiber cable harnesses and electronics components.
Performs DWV/IR, continuity, and isolation testing in accordance with engineering documentation and specifications.
Perform visual, dimensional, mechanical and/or electrical inspection utilizing standard documentation, procedures, and precision measuring devices to support final inspection.
Accept/reject for conformance to standards and specifications.
Verify compliance to applicable standards and other approved documentation.
Inspection of completed assemblies as well as in process inspections as needed to accommodate all required engineering requirements.
Perform inspections on flight and ground support equipment in a Class 8 clean room.
Maintain files and records as required.
Ensure satellite assembly techniques and requirements are incompliance with all engineering documentation.
Communicate professionally and effectively with internal and external vendors as needed.
Communicate closely with the Quality Manager and Avionics Manager to ensure the accurate documentation of non-conforming products, workmanship deficiencies, continual improvements, and corrective actions.
Adhere to all Quality Management Systems standards and procedures.
Verify and compare all assembly documentation for accuracy and completeness.
Treat all team members with respect and dignity ensuring a collaborative culture is continually developed and maintained.
Other duties as assigned**

Required Skills

Ability to read, interpret and apply various technical data such as prints, specifications and utilize specialized inspection and hand tools.
Ability to handle multiple tasks simultaneously in a fast-paced environment.
Solution oriented while committed to consistency and process.
Ability to work under minimal direction while keeping within the limitations of designated authorities, exercising regular use of good judgment.
Excellent written and verbal communication skills to be able present information, concepts and proposals with a wide range of audiences at all levels, technical or non-technical individuals both internal and external to the company.
Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.

Required Education and Experience

Minimum three (3) years' experience in quality inspection of cable fabrication, assembly, and installation, or other relevant industry experience
High school diploma or GED equivalent. Experience in lieu of education may be considered.
Must be able to read and interpret engineering drawings and cable lists.
Familiarity with AS9100 Rev D standard
Proficiency in Microsoft 365 including Excel, Word, Outlook and Teams.

Desired Skills and Experience

Commitment to providing the highest quality products and services that meet or exceed the requirements and expectations of our customer, actively pursuing opportunities for continual improvements of service quality.
Prior experience in satellite, flight, and ground support assembly and fabrication.
Familiarity with IPC-620, NASA-STD-8739.4, and J-STD-001.
Cable-Eye or other PC based Hi-Pot testing and/or programming.
Experience with integrating processes and procedures in a clean room environment.
Ability to collaborate with many different teams/individuals to reach a common goal by building mutual trust, respect, and cooperation maintaining positive and professional relationships, and contributing to a culture of inclusion.

Physical Requirements

Repetitive movement, long periods of standing and walking on concrete surfaces.
Ability to handle, control, or feel objects, tools or controls.

Travel Requirement
Able to travel <10% of the time

Shift/Schedule
This position is for the day shift generally working 07:00 - 04:00

Total Rewards and Perks:

At Sidus Space, we ask a lot of our team members, which is why we give so much in return. In addition to a competitive salary, a Best-in-Class benefit program with a generous employer paid portion as well as a matching 401(k) on Day ONE, we offer a lot of perks, including:

Jeans every day
Regular onsite food trucks
5 free company t-shirts for Manufacturing Staff or credit to the Company Store
Paid Time Off - Up to 4 weeks of vacation, 5 sick days, and 11 paid holidays - 5 of which can be floated
Adjustable stand-up desks
Employee referral bonus program
Educational assistance and professional training opportunities
Company golf outings and other social events

Additional Eligibility Qualifications

All candidates selected will be subject to background investigation and drug screen.
This position requires access to onsite locations managing Unclassified Naval Nuclear Propulsion Information, which is Not Releasable to Foreign Nationals (NOFORN) data. Therefore, to meet NOFORN requirements, you will have to provide proof of US Citizenship and attest that you do not have dual citizenship.
Must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions of their job, absent undue hardship.

SIDUS SPACE is an Equal Opportunity Employer fostering a respectful work culture that values all contributors. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. For more information on "EEO Is the Law," please visit

Affirmative Action and Disability Accommodation

Applicants wishing to receive information on Sidus Space' Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at [email protected]

Quality Inspector

3 weeks ago

EMF Engineered Components, LLC Merritt Island, United States

**Key Areas of Responsibility**: · - Follows all established safety and work standards and advocate safety throughout the plant. Safety is our number one priority. · - Uses gauges and other measurement devices to verify conformity to customer specifications and company standards ...
Quality Inspector

1 week ago

Advanced Technology Merritt Island, United States

Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder) · **Qualifications**: · **10+ years industry experience in an aviation/aerospace manufacturing environment with at least 8 years in a quality inspection role.** Aerospace, space launch, milita ...
Avionics Quality Inspector

3 weeks ago

SIDUS SPACE, Inc. Cape Canaveral, United States

The vision at Sidus is to make space accessible to everyone by increasing the viability of low-cost access to space. At Sidus, our whole is greater than the sum of our parts. The Sidus team is made up of highly talented individuals, each contributing their own experience, knowled ...
Quality Inspector

1 week ago

Extant Aerospace Melbourne, United States

**_**To conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government.**_** · The Role: Inspectors are responsible for a wide variety of quality inspections on aerospace parts and assemblies, and assure complianc ...
CMM Programmer/Quality Inspector

2 weeks ago

SIDUS SPACE, Inc. Cape Canaveral, United States

Note: This position will work second shift, 3:00 pm - 11:30 pm. · The vision at Sidus is to make space accessible to everyone by increasing the viability of low-cost access to space. At Sidus, our whole is greater than the sum of our parts. The Sidus team is made up of highly tal ...
Quality Inspector

2 weeks ago

Essential Cabinetry Group Rockledge, United States

Job Description · Job DescriptionDescription:Job Description · The Quality Inspector ensures the quality of the product. This is accomplished by examining materials, following the standards and methods for inspection, rework and remake. · Requirements · Support the CARE values of ...
Launch Quality Inspector

3 weeks ago

SpaceX Cape Canaveral, United States

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. ...
Avionics Quality Inspector

2 weeks ago

SIDUS SPACE, Inc. Cape Canaveral, United States

The vision at Sidus is to make space accessible to everyone by increasing the viability of low-cost access to space. At Sidus, our whole is greater than the sum of our parts. The Sidus team is made up of highly talented individuals, each contributing their own experience, knowled ...
Quality Inspector

2 weeks ago

Mainstream Engineering Rockledge, United States

Job Description · Job Description Position Summary · Perform in-process inspections, final inspections and testing of wiring and cable harnesses to IPC-620 Class 3 requirements · Perform inspection and acceptance testing of control boxes and other electrical/electromechanical ass ...
Quality Inspector

3 weeks ago

Beyond Gravity USA INC Titusville, United States

Quality Inspector · Job Requirements: · 3 - 5 years experience as a quality auditor or inspector within a manufacturing environment. Inspect, test and measure materials or products being produced. MES / ERP systems experience with regard to data control and document uploading. Ex ...
Quality Inspector

2 weeks ago

Aerotek West Melbourne, United States

The Quality Inspector is responsible for product quality verification in accordance with customer or industry standard requirements, such as IPC/WHMA-A-620 Class 3 Workmanship. · • Inspects, measures, and validates product conformity by conducting in-process and final inspection ...
Quality Inspector

1 week ago

Aerotek Palm Bay, United States

External Job Description · hiring QUALITY INSPECTORS · If you have any Quality inspecting experience, please email a resume to me directly at jdorlac @ · Responsibilities: · • In-depth knowledge of relevant manufacturing standards · • Ability to use various measurement devices ( ...
CMM Programmer/Quality Inspector

3 weeks ago

BuildSubmarines Cape Canaveral, United States

Note: This position will work second shift, 3:00 pm - 11:30 pm. · The vision at Sidus is to make space accessible to everyone by increasing the viability of low-cost access to space. At Sidus, our whole is greater than the sum of our parts. The Sidus team is made up of highly ta ...
Inspector - Quality

1 day ago

GTT, LLC Merritt Island, FL, United States

Perform detailed inspection of New Glenn vehicle structural, electrical, and mechanical assemblies and systems using CAD models and Blueprints. · Verify Assemblies for conformance against engineering requirements. · Document nonconformance in accordance with internal procedures ...
CMM Programmer/Quality Inspector

3 weeks ago

SIDUS SPACE, Inc. Cape Canaveral, United States

Note: This position will work second shift, 3:00 pm - 11:30 pm.The vision at Sidus is to make space accessible to everyone by increasing the viability of low-cost access to space. At Sidus, our whole is greater than the sum of our parts. The Sidus team is made up of highly talent ...
CMM Programmer/Quality Inspector

3 weeks ago

BuildSubmarines Cape Canaveral, United States

Note: This position will work second shift, 3:00 pm - 11:30 pm. · The vision at Sidus is to make space accessible to everyone by increasing the viability of low-cost access to space. At Sidus, our whole is greater than the sum of our parts. The Sidus team is made up of highly tal ...
CMM Programmer/Quality Inspector

3 weeks ago

SIDUS SPACE, Inc. Cape Canaveral, United States

Note: This position will work second shift, 3:00 pm - 11:30 pm.The vision at Sidus is to make space accessible to everyone by increasing the viability of low-cost access to space. At Sidus, our whole is greater than the sum of our parts. The Sidus team is made up of highly talent ...
CMM Programmer/Quality Inspector

1 week ago

SIDUS SPACE, Inc. Cape Canaveral, United States

Note: This position will work second shift, 3:00 pm - 11:30 pm. · The vision at Sidus is to make space accessible to everyone by increasing the viability of low-cost access to space. At Sidus, our whole is greater than the sum of our parts. The Sidus team is made up of highly ta ...
Quality Inspector III

3 days ago

HireTalent - Diversity Staffing & Recruiting Firm Merritt Island, United States

Qualifications: · Bachelors of Engineering degree. · 2-5 years' proven experience in a Quality Engineer role in a production environment. · Familiarity with AS9100 or ISO9000 QM System and/or related quality systems and programs. · Ability to support manufacturing schedules (firs ...
Quality Inspector

2 weeks ago

Shapes Group Ltd. Co. Palm Bay, United States

Job Description · Job DescriptionResponsibilities and Duties Required · Inspect product using standard inspection tools (calipers, micrometers, height gage, etc.). · Read and understand industrial / aerospace specifications including ISO9001 and AS9100, military specifications, ...