- Design power distribution, motor control, and lighting systems for industrial facilities in collaboration with other licensed engineers and designers
- Review and approve electrical designs for low and medium voltage electrical power distribution systems
- Collaborate with architects, engineers, and contractors on new construction/renovation projects
- Manage electrical design specifications and drawings
- Mentor junior professionals and EITs to become knowledgeable in low and medium voltage electrical distribution systems
- Estimate design budgets and schedules
- Work on multiple projects simultaneously
- Lead projects through the conceptual, preliminary, and detailed design phases
- Present design progress directly to clients both in-person and virtually
- Review and approve contractor submittals, and respond to RFIs
- Conduct site observations during design, and installation verification walks during construction
- Make an impact day-to-day with your skills and expertise, strengthening that relationship with our clients and team
- A minimum of ten years of experience with low and medium voltage power, normal and emergency lighting, lighting controls, motor controls, protective relay design, grounding, lightning protection, PV arrays, generator and UPS standby power, conduit, or cable tray routing
- Extensive experience in executing projects for industrial facilities with a focus on the highest level of quality, cost effectiveness, and safety
- The ability to train and lead electrical engineers and designers
- Experience with multi-discipline large capital projects involving owners, general contractors, contractors, and system integrators
- A solid understanding of design/build (engineering and construction)
- Familiarity with facilities document control systems
- Experience reviewing and updating power system models utilizing SKM or ETAP (EasyPower preferred)
- Experience with project close out including reviewing construction specifications, as-built drawings, O&M manuals, and construction submittals
- Experience working with designers to produce 2D plans using 3D BIM modeling software
- CAD experience (Revit preferred)
- The ability to perform and teach electrical design calculations (voltage drop, short circuit, overcurrent coordination, connected load, touch and step potential, CT burden, N-G resistor sizing, cable pull tension)
- Experience in the technical application of the following building codes: NFPA (70, 70E, 30, 101, 110, 780), NESC, IBC, IFC, IECC, ASHRAE 90.1
- Proficiency in written and verbal technical communication including generating reports and conducting group presentations
- The ability to collaborate with other engineering disciplines across multiple offices
- A bachelor of science in electrical engineering from an ABET accredited institution
- An active Professional Engineering (PE) license in at least one state and a willingness to obtain licensure in additional states as necessary
-
Electrical Test Engineer
2 weeks ago
EnerSys Bellingham, United StatesPress Tab to Move to Skip to Content Link · Select how often (in days) to receive an alert: · Create Alert · EnerSys is the global leader in stored energy solutions for industrial applications. We have over thirty manufacturing and assembly plants worldwide servicing over 10,000 ...
-
Sr. Electrical Engineer, PE
3 weeks ago
Barry-Wehmiller Companies Inc Bellingham, United StatesAbout Us:BW Design Group is a fully integrated architecture, engineering, construction, system integration, and consulting firm committed to helping our clients realize their most critical goals from Strategy to Commercialization. As the only firm born from a manufacturing techno ...
-
Electrical Engineer
1 week ago
Gables Search Group Burlington, United StatesElectrical Engineer (5+ Years) We are in search of a dedicated Electrical Engineer with a minimum of five years of experience, driven by a passion for systems design, committed to professional growth, and eager to collaborate within a high-performing multidisciplinary team. The i ...
-
Electrical Engineer
6 days ago
AKP Recruiting Burlington, United StatesJob Description Our clients Burlington office is seeking an Electrical Engineer with three to fifteen plus years of experience in consulting engineering. Applicants must be well versed in all aspects of electrical systems design and specification. The desired individual should be ...
-
Electrical Engineer
6 days ago
Coffman Engineers Burlington, United StatesCompany DescriptionAt Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small, including commercial, retail, institutional, government, industrial, and project/construction management. Incorporated in 1979, we have employees in more tha ...
-
Electrical Engineer
4 weeks ago
Knewin Burlington, United StatesCompany Description · At Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small, including commercial, retail, institutional, government, industrial, and project/construction management. Incorporated in 1979, we have employees in more ...
-
Electrical Engineer
2 weeks ago
Coffman Engineers Burlington, United StatesCompany Description · At Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small, including commercial, retail, institutional, government, industrial, and project/construction management. Incorporated in 1979, we have employees in more ...
-
Senior Vessel Engineer
1 day ago
Northline Seafoods Bellingham, United States Full timeSUMMARY · Northline Seafoods is a growing seafood processing company looking for an experienced and motivated Senior Vessel Engineer. Primary responsibilities of this position will be the safe and efficient operation of a CO2/NH3 cascade refrigeration system as well as leading a ...
-
Instrument and Controls Engineer
3 weeks ago
Wessagusset Staffing Bellingham, United StatesJob Description · Job DescriptionJOB SUMMARY · We are looking for control systems engineers and instrumentation engineers to join our group. Our engineers are expected to work largely independently, with basic guidance from a lead engineer or project leader. This position require ...
-
Hospital Engineer Certified
1 day ago
Peace Health Bellingham, United StatesJob Description · Description · PeaceHealth is seeking a Hospital Engineer Certified for a Full Time, 1.00 FTE, Variable position. The general salary range for this job opening at PeaceHealth is $ $57.58. The actual hiring rate is dependent upon several factors, including but not ...
-
Hospital Engineer Certified
4 days ago
PeaceHealth Bellingham, United States**Description** · PeaceHealth is seeking a Hospital Engineer Certified (PL-01 Plumber) for a Full Time, 1.00 FTE, Variable position. The general salary range for this job opening at PeaceHealth is $ $57.58. The actual hiring rate is dependent upon several factors, including but n ...
-
Hospital Engineer Certified
3 weeks ago
PeaceHealth Bellingham, United States**Description** · PeaceHealth is seeking a Hospital Engineer Certified for a Full Time, 1.00 FTE, Variable position. The general salary range for this job opening at PeaceHealth is $ $57.58. The actual hiring rate is dependent upon several factors, including but not limited to, t ...
-
Hospital Engineer Certified
3 weeks ago
PeaceHealth Bellingham, United States**Description** · PeaceHealth is seeking a Hospital Engineer Certified PL-01 Plumber for a Full Time, 1.00 FTE, Variable position. The general salary range for this job opening at PeaceHealth is $ $56.17. The actual hiring rate is dependent upon several factors, including but not ...
-
Engineer I
1 week ago
Utilities Service Co Inc Bellingham, United StatesEngineer I · The Engineer Position will support utility project engineers and project managers in the planning, engineering and design of electric distribution projects. Under the guidance of PM or Senior Planner, the Planner will make site visits, take measurements, use structu ...
-
Service technician/electrician
2 weeks ago
BlueWave Solutions Sudden Valley, United StatesService Technician/Electrician (M/F/D) · Location: Sindelfingen, Germany · Type of Employment: Full-time · Working Hours: 40 hours per week · About KPS Prüfservice · KPS Prüfservice is one of the leading companies nationwide in the field of electrical equipment testing. Our focus ...
-
Solar Construction General Forman
1 day ago
Blue Collar Recruiter of Marietta Bellingham, United StatesJob Description · Job DescriptionAre you a leader with problem solving skills? We would love to hear from you. · The purpose of this position is to manage and supervise multiple crew leads simultaneously in all aspects of construction at Western Solar including solar PV systems, ...
-
Project Engineering Coordinator
3 weeks ago
All American Marine Bellingham, United StatesJob Description · Job DescriptionAll American Marine in Bellingham, WA is seeking to hire a full-time Project Engineering Coordinator to help us efficiently build our customized vessels. The typical schedule for this position is Monday-Thursday, 6am-4:30pm. Are you looking for an ...
-
Solar Construction General Forman
2 weeks ago
The Blue Collar Recruiter - Marietta Bellingham, United StatesJob Description · Job DescriptionAre you a leader with problem solving skills? We would love to hear from you. · The purpose of this position is to manage and supervise multiple crew leads simultaneously in all aspects of construction at Western Solar including solar PV systems, ...
-
Maintenance Reliability Manager
5 days ago
Koch Industries Bellingham, United States*Relocation Assistance is Available* · Your Job · Georgia-Pacific, LLC is now hiring a Maintenance Reliability Manager for our Olympia, WA Corrugated facility. The ideal candidate will be a self-driven individual with a passion for excellence in safety, continuous improvement, m ...
-
Electronics technician
2 weeks ago
Spectrum Dynamics Sudden Valley, United StatesAbout the Company · Our electromechanical engineering company has been in business for over 115 years. During this time, we have evolved from a traditional craft business, a small armature winding company, to a diversified service and trading partner, as well as a licensed manufa ...
Sr. Electrical Engineer, PE - Bellingham, United States - Barry-Wehmiller Companies Inc
Description
About Us:BW Design Group is a fully integrated architecture, engineering, construction, system integration, and consulting firm committed to helping our clients realize their most critical goals from Strategy to Commercialization. As the only firm born from a manufacturing technology company to become an independent and fully integrated firm, we combine deep domain expertise in the manufacturing environment with an approach that is built to serve the dynamic needs of our clients. Rooted in our distinct culture of Truly Human Leadership, we cultivate the leaders who will define tomorrow and partner with our clients in the food & beverage, life sciences, industrial, and advanced technology industries to build the future of manufacturing and technology.
Barry-Wehmiller is a diversified global supplier of engineering consulting and manufacturing technology for the packaging, corrugating, sheeting and paper-converting industries. By blending people-centric leadership with disciplined operational strategies and purpose-driven growth, Barry-Wehmiller has become a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world.
Job Description:
Who You'll Work With
You will join one of our 45 offices in the US, be part of a committed team of over 1500 professionals, and work in teams and directly with our clients doing work that is shaping the world around us. You will be welcomed into a rapidly growing business and team and empowered to make an impact. You will be valued, cared for, and challenged on your path to becoming a world-class professional consultant and surrounded by leaders who are committed to creating an environment that enables you to realize your own success and fulfillment.
When you join Design Group as an Electrical Engineer, PE, you are joining a team that will challenge you and position you for growth. In this role, you will work with a team of industry experts to help the world's leading companies solve their most difficult problems. You will join our Architecture/Engineering Practice and partner with seasoned leaders, technical specialists, and subject matter experts to deliver the highest quality solutions to our clients with consistency and accuracy.
What You'll Do
You'll work individually and in teams to support capital projects and implement solutions for our clients. Together, you will help our clients make critical changes to improve their performance and realize their most important goals.
Feel like you're on the path to becoming an Electrical Engineer, PE but you're not quite there yet? We'd love to connect with you to see if we can take you from where you are today and grow you into a Design Group Engineering Consultant.
The approximate pay range for this position is $100,000-$150,000. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and abilities as well as geographic location of the position.
#LI-TT
At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process.
Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify.
Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments.
Company:
Design Group