- Involvement and support in the installation, debugging, validation and start-up of new production injection molding equipment.
- Handle all stacking, corrugated case construction and perform assigned duties at presses as determined by production volume. Move and stack production pallets as needed.
- Monitor parameters required to produce quality product and maintain accurate molding conditions.
- Operate molding equipment according to scheduled requirements of molding work orders and equipment, optimizing available molding capacity.
- Assists in the preventative maintenance of auxiliary equipment, including granulators, conveyor, liquid temperature controllers, molds, electrical controls, etc.
- Perform minor service to presses and equipment and notifies accurate personnel of major repairs or maintenance needed.
- Assist technicians and supervisor with training of new associates.
- Responsible for production and quality on a line of machines, and cleanliness and orderly condition of a designated area
- Be familiar with all department inspection procedures and standards and continually monitor product for acceptable quality.
- Maintenance of records and prepare required reports including: SPC, Q.C. inspection, housekeeping, production downtime reports, mold cavity and cycle time sheets and problem/corrective action logs, etc., in accordance with departmental standards and Good Manufacturing Practices.
- Reporting of daily production, machine utilization, preventive maintenance etc. information using the company's Enterprise Resource Management System (i.e. SAP).
- Observance of all safety and environmental procedures and Good Manufacturing Practices.
- Work with limited supervision and maintain an atmosphere of cooperation
- Transportation of raw materials and finished goods to and from molding area as needed for production.
- Perform miscellaneous duties as required by supervision.
- Shift: Green Nights
- High School education or equivalent required
- Technical Training, education, or experience within a molding operation preferred.
- 1 to 2 years manufacturing experience required
- Molding processing experience or mechanical experience with injection molding machines is highly preferred
- General knowledge of plastic materials and processes, mold design and operation is desired
- An understanding of hydraulic/electrical circuits and auxiliary equipment involved in injection molding required
- Requires a fundamental ability to maintain accurate records and reporting.
Specimen Management Consultant - Dallas, United States - BD
Description
High School education or equivalent required1 to 2 years manufacturing experience required
An understanding of hydraulic/electrical circuits and auxiliary equipment involved in injection molding required
Requires a fundamental ability to maintain accurate records and reporting
Responsibilities
As a Molding Technician, you will be responsible for operating Injection Molding presses proficiently while maintaining quality, productivity, cost, safety, and housekeeping goals.
Involvement and support in the installation, debugging, validation and start-up of new production injection molding equipment
Handle all stacking, corrugated case construction and perform assigned duties at presses as determined by production volume
Move and stack production pallets as needed
Monitor parameters required to produce quality product and maintain accurate molding conditions
Operate molding equipment according to scheduled requirements of molding work orders and equipment, optimizing available molding capacity
Assists in the preventative maintenance of auxiliary equipment, including granulators, conveyor, liquid temperature controllers, molds, electrical controls, etc
Perform minor service to presses and equipment and notifies accurate personnel of major repairs or maintenance needed
Assist technicians and supervisor with training of new associates
Responsible for production and quality on a line of machines, and cleanliness and orderly condition of a designated area
Be familiar with all department inspection procedures and standards and continually monitor product for acceptable quality
Maintenance of records and prepare required reports including: SPC, Q.C. inspection, housekeeping, production downtime reports, mold cavity and cycle time sheets and problem/corrective action logs, etc., in accordance with departmental standards and Good Manufacturing Practices
Reporting of daily production, machine utilization, preventive maintenance etc
Observance of all safety and environmental procedures and Good Manufacturing Practices
Work with limited supervision and maintain an atmosphere of cooperation
Transportation of raw materials and finished goods to and from molding area as needed for production
Perform miscellaneous duties as required by supervision
Shift:
Green Nights
Sign-On Bonus $5,000
Qualifications
High School education or equivalent required
1 to 2 years manufacturing experience required
An understanding of hydraulic/electrical circuits and auxiliary equipment involved in injection molding required
Requires a fundamental ability to maintain accurate records and reporting
Responsibilities
As a Molding Technician, you will be responsible for operating Injection Molding presses proficiently while maintaining quality, productivity, cost, safety, and housekeeping goals.
Involvement and support in the installation, debugging, validation and start-up of new production injection molding equipment
Handle all stacking, corrugated case construction and perform assigned duties at presses as determined by production volume
Move and stack production pallets as needed
Monitor parameters required to produce quality product and maintain accurate molding conditions
Operate molding equipment according to scheduled requirements of molding work orders and equipment, optimizing available molding capacity
Assists in the preventative maintenance of auxiliary equipment, including granulators, conveyor, liquid temperature controllers, molds, electrical controls, etc
Perform minor service to presses and equipment and notifies accurate personnel of major repairs or maintenance needed
Assist technicians and supervisor with training of new associates
Responsible for production and quality on a line of machines, and cleanliness and orderly condition of a designated area
Be familiar with all department inspection procedures and standards and continually monitor product for acceptable quality
Maintenance of records and prepare required reports including: SPC, Q.C. inspection, housekeeping, production downtime reports, mold cavity and cycle time sheets and problem/corrective action logs, etc., in accordance with departmental standards and Good Manufacturing Practices
Reporting of daily production, machine utilization, preventive maintenance etc
Observance of all safety and environmental procedures and Good Manufacturing Practices
Work with limited supervision and maintain an atmosphere of cooperation
Transportation of raw materials and finished goods to and from molding area as needed for production
Perform miscellaneous duties as required by supervision
Shift:
Green Nights
Benefits
Sign-On Bonus $5,000
Job Description Summary
Red Nights...
Job Description
We are the makers of possible
BD is one of the largest global medical technology companies in the world. Advancing the world of health is our Purpose, and it's no small feat.
It takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities.
We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a maker of possible with us.
Are you passionate about manufacturing and looking for a dynamic role as a Molding Technician? We are seeking a highly motivated and skilled individual to join our team.
As a Molding Technician, you will be responsible for operating Injection Molding presses proficiently while maintaining quality, productivity, cost, safety, and housekeeping goals.
You will also be responsible for continually improving your knowledge of plastic materials, molding processes, and auxiliary equipment with the goal of promotion to Molding Technician II.
Sign-On Bonus $5,000for qualified applicants
Responsibilities
The responsibilities of this position include but are not limited to:
Qualifications:
For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19.
In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.Why Join Us?
A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work.
It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day.
To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do.
To learn more about BD visit
Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer.
We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.
Primary Work LocationUSA NE - Broken Bow
Additional Locations
Work Shift
Company information
BD is one of the largest global medical technology companies in the world and is advancing the world of health by improving medical discovery, diagnostics and the delivery of care.
The company supports the heroes on the frontlines of health care by developing innovative technology, services and solutions that help advance both clinical therapy for patients and clinical process for health care providers.
BD and its 65,000 employees have a passion and commitment to help improve patient outcomes, improve the safety and efficiency of clinicians' care delivery process, enable laboratory scientists to better diagnose disease and advance researchers' capabilities to develop the next generation of diagnostics and therapeutics.
BD has a presence in virtually every country and partners with organizations around the world to address some of the most challenging global health issues.
By working in close collaboration with customers, BD can help enhance outcomes, lower costs, increase efficiencies, improve safety and expand access to health care.
In 2017, BD welcomed C. R. Bard and its products into the BD family. For more information on BD, please visitBiotechnology, Retail, Finance, Financial Services, Marketing, Manufacturing, Technology, Consulting, Pharmaceuticals, Medical Devices
Public Company
Franklin Lakes, New Jersey
Company Specialties:
Medical Devices, Biosciences, Medical Supplies, Laboratory Instruments, Reagents, Diagnostics Products, Antibodies, Surgical, and Vascular Access
#J-18808-Ljbffr