- Lay out, plan and perform a wide variety of mechanical assemblies consisting of but not limited to subassembly work, mounting of commercial components (bearings, pneumatic components and drive systems) to large and small frame weldments. High degree of accuracy required for close tolerance assembly involving bearing surface fit, machine bed surface assembly.
- Working from bill of material (B.O.M.) and shop floor routings, obtain parts and components necessary for assigned tasks.
- Check for apparent defects, damage to all components prior to installation/assembly.
- Work from mechanical drawings, pneumatic and hydraulic schematics, written, verbal, and own knowledge for determining location and placement of commercial components, pneumatic and hydraulic assemblies, machined parts and fabricated parts.
- Check finished work for integrity and adherence to specification.
- Start-up and test finished machinery per specifications.
- Use common power tools, as well as hand and measuring tools (calipers, micrometers, dial indicators).
- Perform inventory control procedures with regards to cycle counting, verification of on hand balances and report part discrepancies, B.O.M. and routing errors.
- Report time, production or other required information on proper forms.
- Detect and report faulty equipment, material, or other unusual conditions to proper supervision.
- Observe all prescribed safety rules and regulations.
- All other duties as assigned.
- High School Diploma or equivalent required.
- Working knowledge of basic measuring instruments such as calipers, micrometers and dial indicators.
- Working knowledge of machine electrical controls and functionality.
- Must read and interpret mechanical, pneumatic, hydraulic and electrical drawings.
- High degree of troubleshooting skills is necessary as well as the ability to interface with engineering personnel with regards to machine performance and functionality.
- Must be able to safely operate overhead crane.
- Attention to Detail - Job requires being careful about detail and thorough in completing work tasks.
- Dependability - Job requires being reliable, responsible, and dependable, and fulfilling obligations.
- Cooperation - Job requires being pleasant with others on the job and displaying a goodnatured, cooperative attitude.
- Persistence - Job requires persistence in the face of obstacles.
- Initiative - Job requires a willingness to take on responsibilities and challenges.
- Minimum 2 years' experience in a production/assembly environment preferred.
- While performing the duties of this job, the employee is frequently required to stand, sit and walk. The employee regularly uses hands and fingers. The employee must also be capable of bending, reaching, kneeling, crouching, and climbing. The employee must regularly lift, push, pull, and/or move up to 50 pounds.
- While performing the job light to moderate physical activity, performing strenuous daily activities of a product/technical nature is required.
- While performing the job the employee may be exposed to various environmental conditions, loud noise levels and more frequently working around mechanical parts.
- To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability, and physical demands required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
-
Machine Builder
1 week ago
GED Integrated Solutions Solon, United StatesJob PurposeConstruct, assemble, or rebuild GED machines. Working with blue prints, assembly drawings,specifications, sketches, and verbal and written instructions, assembles, disassembles, repairs andadjusts a variety of units, attachments, components and/or accessories.Duties an ...
-
Mechanical Machine Builder
1 day ago
Area Temps Bedford, United StatesA local manufacturing company is seeking Mechanical Machine Builders who have strong electrical and hydraulics background in maintenance and machine building. Work hours are Monday through Friday from 7 a.m. to 3:30 p.m. Mechanical, Builder, Mechanic, Construction, Staffing · ...
-
Machine Builder
1 week ago
Professional Placement Services Willoughby, United StatesWe are looking for a dedicated and accountable Machine Builder to join our first shift team We are a global manufacturer of temperature control systems for a wide array of manufacturing industries. · Job Description: · Pipe Fitting, Tube Bending, Brazing and Soldering Experienc ...
-
Machine Builder
3 weeks ago
PPS-HPS Willoughby, United StatesJob Description · Job DescriptionWe are looking for a dedicated and accountable Machine Builder to join our first shift team We are a global manufacturer of temperature control systems for a wide array of manufacturing industries. · Job Description: · Pipe Fitting, Tube Bending, ...
-
Machine Builder
1 week ago
Air Technical Industries Inc Mentor, United StatesAir Technical Industries, located in Mentor, Ohio, specializes in developing innovative material handling machinery. With over six decades of experience, we excel in problem-solving, boasting a dedicated team of engineers and skilled builders. Having manufactured more than 2500 m ...
-
Machine Builder
3 weeks ago
Crucial Link Group Willoughby, United StatesJob Description · Job DescriptionTitle: Machine BuilderType: Full-time, temp to hirePay: Up to $18/hour, based on experienceShift: 1st shift · Position Summary:The purpose of this position is to assemble and build injection molding machines according to company and/or customer s ...
-
Machine Builder
1 week ago
Air Technical Industries Inc Mentor, United StatesAir Technical Industries, located in Mentor, Ohio, specializes in developing innovative material handling machinery. With over six decades of experience, we excel in problem-solving, boasting a dedicated team of engineers and skilled builders. Having manufactured more than 2500 m ...
-
Machine Builder
3 weeks ago
Air Technical Industries Mentor, United StatesJob Description · Job DescriptionAir Technical Industries, located in Mentor, Ohio, specializes in developing innovative material handling machinery. With over six decades of experience, we excel in problem-solving, boasting a dedicated team of engineers and skilled builders. Hav ...
-
Machine Builder
2 days ago
Air Technical Industries Inc Mentor, United States· Air Technical Industries, located in Mentor, Ohio, specializes in developing innovative material handling machinery. With over six decades of experience, we excel in problem-solving, boasting a dedicated team of engineers and skilled builders. Having manufactured more than 250 ...
-
Machine Builder
3 weeks ago
US Molding Machinery Co. Cleveland, United StatesJob Description · Job DescriptionRequired Skills/Experience · Understanding of electrical theory, pneumatics/hydraulics · Obtain parts for assembly, move to work area with fork lift or remote operated crane using chains and lifters, set piece in area or stand · Attention to detai ...
-
Machine Builder and Fabricator
3 weeks ago
Custom Paper Tubes Cleveland, United StatesJob Description · Job DescriptionCustom Paper Tubes in Valley View, OH is looking to hire a full-time experienced Machine Builder and Fabricator. · This position earns a minimum starting wage of $23.00/hour, based on experience and has the opportunity for performance-based incre ...
-
Mechanical Machine Builder
1 week ago
Area Temps Lakewood, United States· Job Description · A local manufacturing company is seekingMechanical Machine Builders whohave strong electrical and hydraulics background in maintenanceand machinebuilding. Work hours are Monday through Friday from7 a.m. to 3:30 p.m. · Job Requirements · Qualified candidates ...
-
Machine Builder Assembler
1 week ago
Air Technical Industries Inc Mentor, United StatesAir Technical Industries, located in Mentor, Ohio, specializes in developing innovative material handling machinery. With over six decades of experience, we excel in problem-solving, boasting a dedicated team of engineers and skilled builders. Having manufactured more than 2500 m ...
-
Equipment Assembler/Machine Builder
3 weeks ago
Area Temps, Inc. Cleveland, United States* ge* · *A manufacturing company* *is seeking an Equipment Assembler – Machine Builder to build technical equipment and machines for the company product line. This is a first shift position. * · *Responsibilities:* · * *Review and analyze orders and/or prints for accuracy* · * *F ...
-
Equipment Assembler/Machine Builder
3 weeks ago
Express Employment Professionals Cleveland, United StatesJob Description · Job DescriptionExpress Employment Professionals of Lakewood is looking for a Machine Builder/Equipment Assembler. · Duties: · Fit and fasten components together according to prints, manuals and knowledge of machine construction using hand tools and power tools. ...
-
Machine Builder/Assembly Technician
3 weeks ago
Fusion, Inc. Willoughby, United StatesJob Description · Job DescriptionFusion, Inc. is looking for a new machine builder to join the team in advanced manufacturing. A person in this position will be able to turn a concept, engineer drawings and individual components into a fully automated brazing or soldering machine ...
-
IT Help Desk Technician
2 weeks ago
Innovative Refrigeration Systems Lyndhurst, United States**IT Help Desk Technician** · **Innovative Refrigeration Systems, Inc.** is the premier custom industrial refrigeration system design-builder in the world. We engineer, design, manufacture, and construct custom refrigeration solutions for our customers all across North America. W ...
-
Creative Custom Fabricator
3 weeks ago
DCL Design Communications Avon, United StatesDesign Communications, Ltd. (DCL) engineers and builds high-visibility architectural products for renowned clients around the world. DCL is currently seeking highly creative, solutions oriented, intelligent Fabricators and builders to join our spectacularly talented team in Avon, ...
-
Executive Assistant
3 weeks ago
Crimson Solutions Cleveland, United StatesThe BBS Automation GmbH is a renowned special machine builder with a global presence at 16 locations. Together with the brands Kahle, teamtechnik and HEKUMA, BBS Automation belongs to the automation unit 'Production Automation Systems' (PAS) within the Dürr Group and is an integr ...
-
Pipeline builder
3 days ago
Crimson Enterprises Kirtland, United StatesIntroduction: · As the market leader for energy infrastructure, SPIE SAG GmbH is looking for you to join their team in the City Networks & Grids division as soon as possible. · Tasks: · Support of the installation team for traffic technology · Restoration of sidewalks and traffic ...
Machine Builder - Glenwillow, United States - GED Integrated Solutions
Description
Job PurposeConstruct, assemble, or rebuild GED machines. Working with blue prints, assembly drawings,
specifications, sketches, and verbal and written instructions, assembles, disassembles, repairs and
adjusts a variety of units, attachments, components and/or accessories.
Duties and Responsibilities
Education
